FASTData January 1999 ReleaseFASTData January 1999 Release| Descriptions | |
| FDMS: | Obtaining Data |
| Documentation Abstract: |
Computer-Aided Molecular Design of Fire Resistant Aircraft Materials. |
| Material: | Phenolic Resin (Resole) |
| Lab: | National Institute of Standards and Technology |
| Sponsor: | National Institute of Standards and Technology |
| Date: | 12/23/1993 |
| Test Ref No: | T6172 |
| Tested by: | Jack Lee |
| Approved by Scientific Officer: | James Brown |
| Mass Lost: | 3428.24 g/m2 | Total Heat Released: | 23.4209 MJ/m2 |
| Peak RHR: | 174.213 kW/m2 | Peak Mass Loss Rate: | 14.6604 g/m2s |
| Units | Test Mean | 60 s | 180 s | 300 s | |
| Heat Release | kW/m2 | 90.2259 | 129.262 | 108.627 | 77.8314 |
| Mass Loss Rate | g/m2s | 0.00986164 | 0.0127593 | 0.0115508 | 0.0114275 |
| Heat of Combustion | MJ/kg | 6831740 | 10.1308 | 9.4043 | 6.8109 |
| Specific Ext. Area | m2/kg | - | - | - | - |
| Carbon Dioxide | kg/kg | 0.61502 | 1.08545 | 0.888921 | 0.61502 |
| Carbon Monoxide | kg/kg | 0.0112984 | 0.0131547 | 0.0115317 | 0.0112984 |
Flaming out time 6 minutes. Sample smokes 23 second,charring
64 second and edge shrinking about 4 minutes. TUH/H20
analyzers are down--no soot collected--Sample in al. foil
pan on foam glass on pan holder. Spark ignited used-
Ascarite and drierite used in test T6172.
| Heat Flux: | 50 kW/m2 | Nominal Flow: | 24 l/s |
| Orifice Constant: | 0.0433844 | Heat per Unit Mass O2: | 13.1 J/kg |
| Heater Orientation: | H | Spark Ignitor Used: | Y |
| Grid Used: | Y | Frame Used: | Y |
| Conditioning: | 50 RH @ 296 K | Test Conditions: | 50 RH |
| Specimen Thickness: | - | Specimen Area: | 0.0036 m2 |
| Initial Mass: | 0.06635 g | Time of Peak RHR: | 130 s |
| Final Mass: | 0.0540083 g | Peak RHR: | 174.213 kW/m2 |
| Mass Lost: | 3428.24 g/m2 | Peak Mass Loss Rate: | 14.6604 g/m2s |
| Ignition Time: | 102 s | Peak Extinction Area: | - |
| Flameout Time: | 367 s | Total Heat Released: | 23.4209 MJ/m2 |
| Publication Status: | Unpublished |
| Statistical Basis of Data: | Replicate data available for the same test method and test conditions |
| Material Development/ Production Status: | Experimental material |
| Evaluation Status: | Data have been validated |
| Laboratory Accreditation Status: | The laboratory is recognized by (inter)national accreditation bodies |
| Completeness of Material Description: | Partial information on material |
| Completeness of Test Procedure Description: | Standard test procedure |
