FASTData January 1999 ReleaseFASTData January 1999 Release| Descriptions | |
| FDMS: | Obtaining Data |
| Documentation Abstract: |
Computer-Aided Molecular Design of Fire Resistant Aircraft Materials. |
| Material: | Phenolic Resin (Resole) |
| Lab: | National Institute of Standards and Technology |
| Sponsor: | National Institute of Standards and Technology |
| Date: | 12/14/1993 |
| Test Ref No: | T6157 |
| Tested by: | Jack Lee |
| Approved by Scientific Officer: | James Brown |
| Mass Lost: | 5706.93 g/m2 | Total Heat Released: | 112.467 MJ/m2 |
| Peak RHR: | 212.545 kW/m2 | Peak Mass Loss Rate: | 12.3753 g/m2s |
| Units | Test Mean | 60 s | 180 s | 300 s | |
| Heat Release | kW/m2 | 49.5606 | 171.779 | 134.159 | 129.008 |
| Mass Loss Rate | g/m2s | 0.00604846 | 0.0112381 | 0.0107205 | 0.0101602 |
| Heat of Combustion | MJ/kg | 19707000 | 15.2854 | 12.5143 | 12.6974 |
| Specific Ext. Area | m2/kg | - | - | - | - |
| Carbon Dioxide | kg/kg | 1.8073 | 1.30982 | 1.14812 | 1.1828 |
| Carbon Monoxide | kg/kg | 0.050742 | 0.0133529 | 0.00994736 | 0.00931522 |
Stopped test 40 minute/2399 second. Sample smoke 30 second,
Cracking 45 second and C0 flames 13 minutes. Sample charred
and cracked from T6155. Sample in al. foil pan with foam
glass and pan holder. T6157 Phenolic Resin (Resole) 50kW/m2
area .00439m2 diameter 7.5 Cm 20mm thickness T6157
| Heat Flux: | 50 kW/m2 | Nominal Flow: | 24 l/s |
| Orifice Constant: | 0.0434031 | Heat per Unit Mass O2: | 13.1 J/kg |
| Heater Orientation: | H | Spark Ignitor Used: | Y |
| Grid Used: | N | Frame Used: | N |
| Conditioning: | 50 RH @ 296 K | Test Conditions: | 50 RH |
| Specimen Thickness: | - | Specimen Area: | 0.00407 m2 |
| Initial Mass: | 0.0452 g | Time of Peak RHR: | 140 s |
| Final Mass: | 0.0219728 g | Peak RHR: | 212.545 kW/m2 |
| Mass Lost: | 5706.93 g/m2 | Peak Mass Loss Rate: | 12.3753 g/m2s |
| Ignition Time: | 124 s | Peak Extinction Area: | - |
| Flameout Time: | 2399 s | Total Heat Released: | 112.467 MJ/m2 |
| Publication Status: | Unpublished |
| Statistical Basis of Data: | Replicate data available for the same test method and test conditions |
| Material Development/ Production Status: | Experimental material |
| Evaluation Status: | Data have been validated |
| Laboratory Accreditation Status: | The laboratory is recognized by (inter)national accreditation bodies |
| Completeness of Material Description: | Partial information on material |
| Completeness of Test Procedure Description: | Standard test procedure |
