FASTData January 1999 ReleaseFASTData January 1999 Release| Descriptions | |
| FDMS: | Obtaining Data |
| Documentation Abstract: |
Computer-Aided Molecular Design of Fire Resistant Aircraft Materials. |
| Material: | Phenolic Resin (Novalac) |
| Lab: | National Institute of Standards and Technology |
| Sponsor: | National Institute of Standards and Technology |
| Date: | 12/14/1993 |
| Test Ref No: | T6156 |
| Tested by: | Jack Lee |
| Approved by Scientific Officer: | James Brown |
| Mass Lost: | 6591.74 g/m2 | Total Heat Released: | 140.818 MJ/m2 |
| Peak RHR: | 269.742 kW/m2 | Peak Mass Loss Rate: | 17.2018 g/m2s |
| Units | Test Mean | 60 s | 180 s | 300 s | |
| Heat Release | kW/m2 | 82.404 | 212.107 | 175.129 | 166.738 |
| Mass Loss Rate | g/m2s | 0.0047081 | 0.0149224 | 0.0112122 | 0.00997083 |
| Heat of Combustion | MJ/kg | 21362800 | 14.214 | 15.6194 | 16.7226 |
| Specific Ext. Area | m2/kg | - | - | - | - |
| Carbon Dioxide | kg/kg | 1.66869 | 1.30532 | 1.37334 | 1.46389 |
| Carbon Monoxide | kg/kg | 0.1496 | 0.0165355 | 0.0162766 | 0.0162295 |
Stopped test 30 minutes/1802 seconds. Sample smoke 5 second,
(splatters/charring 14 second), delaminates 2 min 19 second,
and co flames 16 minute. TUH/H20 analyzers are down-no soot
collected-spark ignited used with foam glass and pan holder
T6156 Phenolic Resin (novolac) 50.1kW/m2 .00439 area/6mm
| Heat Flux: | 50.1 kW/m2 | Nominal Flow: | 24 l/s |
| Orifice Constant: | 0.0434031 | Heat per Unit Mass O2: | 13.1 J/kg |
| Heater Orientation: | H | Spark Ignitor Used: | Y |
| Grid Used: | N | Frame Used: | N |
| Conditioning: | 50 RH @ 296 K | Test Conditions: | 50 RH |
| Specimen Thickness: | - | Specimen Area: | 0.00439 m2 |
| Initial Mass: | 0.0407 g | Time of Peak RHR: | 115 s |
| Final Mass: | 0.0117623 g | Peak RHR: | 269.742 kW/m2 |
| Mass Lost: | 6591.74 g/m2 | Peak Mass Loss Rate: | 17.2018 g/m2s |
| Ignition Time: | 87 s | Peak Extinction Area: | - |
| Flameout Time: | 1802 s | Total Heat Released: | 140.818 MJ/m2 |
| Publication Status: | Unpublished |
| Statistical Basis of Data: | Single point value |
| Material Development/ Production Status: | Experimental material |
| Evaluation Status: | Data have been validated |
| Laboratory Accreditation Status: | The laboratory is recognized by (inter)national accreditation bodies |
| Completeness of Material Description: | Partial information on material |
| Completeness of Test Procedure Description: | Standard test procedure |
