FASTData January 1999 ReleaseFASTData January 1999 Release| Descriptions | |
| FDMS: | Obtaining Data |
| Documentation Abstract: |
Computer-Aided Molecular Design of Fire Resistant Aircraft Materials. |
| Material: | PMMA |
| Lab: | National Institute of Standards and Technology |
| Sponsor: | National Institute of Standards and Technology |
| Date: | 1/12/1993 |
| Test Ref No: | T5756 |
| Tested by: | Jack Lee |
| Approved by Scientific Officer: | James Brown |
| Mass Lost: | 2891.43 g/m2 | Total Heat Released: | 67.3458 MJ/m2 |
| Peak RHR: | 552.008 kW/m2 | Peak Mass Loss Rate: | 23.0304 g/m2s |
| Units | Test Mean | 60 s | 180 s | 300 s | |
| Heat Release | kW/m2 | 408.904 | 360.835 | 374.076 | 224.446 |
| Mass Loss Rate | g/m2s | 0.0204205 | 0.0152901 | 0.0162082 | 0.0097249 |
| Heat of Combustion | MJ/kg | 24260900 | 22.4973 | 23.6416 | 23.6416 |
| Specific Ext. Area | m2/kg | - | - | - | - |
| Carbon Dioxide | kg/kg | 2.0853 | 2.59653 | 1.91181 | 1.14709 |
| Carbon Monoxide | kg/kg | 0.0116688 | 0.00656002 | 0.0110204 | 0.00661222 |
Flaming out time at 5 minutes 24 seconds.
TUH is down
NO SOOT COLLECTED
Spark ignited used with pan holder-wool
| Heat Flux: | 20.1 kW/m2 | Nominal Flow: | 24 l/s |
| Orifice Constant: | 0.0423245 | Heat per Unit Mass O2: | 12.98 J/kg |
| Heater Orientation: | H | Spark Ignitor Used: | Y |
| Grid Used: | N | Frame Used: | N |
| Conditioning: | 50 RH @ 296 K | Test Conditions: | 50 RH |
| Specimen Thickness: | - | Specimen Area: | 0.0028 m2 |
| Initial Mass: | 0.0094 g | Time of Peak RHR: | 120 s |
| Final Mass: | 0.00130399 g | Peak RHR: | 552.008 kW/m2 |
| Mass Lost: | 2891.43 g/m2 | Peak Mass Loss Rate: | 23.0304 g/m2s |
| Ignition Time: | 39 s | Peak Extinction Area: | - |
| Flameout Time: | 207 s | Total Heat Released: | 67.3458 MJ/m2 |
| Publication Status: | Unpublished |
| Statistical Basis of Data: | Replicate data available for the same test method and test conditions |
| Material Development/ Production Status: | Experimental material |
| Evaluation Status: | Data have been validated |
| Laboratory Accreditation Status: | The laboratory is recognized by (inter)national accreditation bodies |
| Completeness of Material Description: | Partial information on material |
| Completeness of Test Procedure Description: | Standard test procedure |
