Fire Publications - wood

wood

• Evaluation of the Effectiveness of Fire Resistant Durable Agents on Residential Siding Using an ICAL-Based Testing Protocol.
  Fire and Materials 2001. 7th International Conference and Exhibition. Proceedings. Interscience Communications Limited. January 22-24, 2001, San Antonio, TX, 241-248 pp, 2001.
  Grand, A. F.; Mehrafza, M.
• Examination of the Applicability of Computed Tomography for the Measurement of Component Concentrations in Fire-Generated Plumes.
  Combustion and Flame, Vol. 113, No. 3, 358-372, May 1998.
  Baum, R. T.; McGrattan, K. B.; Nyden, M. R.
• Fire Endurance Test of Selected Residential Floor Constructions.
  NBSIR 82-2488; 113 p. May 1982.
  Fang, J. B.
• Fire Exposure Protection.
  NISTIR 6191; Chapter 3; July 1998.
  Josler, W. J.
• Fire Performance of Selected Residential Floor Constructions Under Room Burnout Conditions. Interim Report.
  NBSIR 80-2134; 79 p. December 1980.
  Fang, J. B.
• Fire Safety of Wood-Burning Appliances. Part 1. State of the Art Review and Fire Tests. Volume 1. Final Report.
  NBSIR 80-2140; 69 p. November 1980.
  Peacock, R. D.; Ruix, E.; Torres-Pereira, R.
• Fire Spread by Brand Spotting.
  NISTIR 6588; November 2000.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 15th Joint Panel Meeting. Volume 2. Proceedings. March 1-7, 2000, San Antonio, TX, Bryner, S. L., Editor(s), 373-380 pp, 2000.
  Pagni, P. J.; Woycheese, J. P.
• Fire Tests of Wood- and Metal-Framed Partitions.
  BMS 071; 53 p. May 12, 1941.
  Ingberg, S. H.; Mitchell, N. D.
• Flame-Spread Measurements by the Radiant Panel Flame-Spread Method.
  Forest Products Journal, Vol. 10, No. 1, 33-36, January 1960.
  Gross, D.
• Generation of Carbon Monoxide in Compartment Fires. Annual Report. September 1991-September 1, 1992.
  NIST GCR 92-619; 265 p. December 1992.
  Gottuk, D. T.
• Global Equivalence Ratio Concept and the Formation Mechanisms of Carbon Monoxide in Enclosure Fires.
  Progress in Energy and Combustion Science, Vol. 21, 197-237, 1995.
  Pitts, W. M.
• Global Equivalence Ratio Concept and the Prediction of Carbon Monoxide Formation in Enclosure Fires.
  NIST Monograph 179; 171 p. June 1994.
  Pitts, W. M.
• Global Equivalence Ratio Concept and the Prediction of Carbon Monoxide Formation in Enclosure Fires.
  NIST Monograph 179; 171 p. June 1994.
  Pitts, W. M.
• Heat Release Rate Characteristics of Some Combustible Fuel Sources in Nuclear Power Plants.
  NBSIR 85-3195; 52 p. July 1985.
  Lee, B. T.
• Heat Release Rate of Wood-Plastic Composites.
  SAMPE Journal, Vol. 33, No. 5, 26-31, September/October 1997.
  Stark, N. M.; White, R. H.; Clemons, C. M.
• Intensity and Duration of Chimneys Fires in Several Chimneys.
  NBSIR 83-2771; 135 p. December 1983.
  Peacock, R. D.
• Investigation of the Effectiveness of Fire Resistant Durable Agents on Residential Siding Using an ICAL-Based Testing Protocol.
  NIST GCR 00-792; 152 p. May 2000.
  Grand, A. F.
• Large Eddy Simulation of Wood Combustion.
  Volume 1;Interscience Communications Ltd.; Building Research Establishment; National Fire Protection Association; National Institute of Standards and Technology; Society of Fire Protection Engineers; and Swedish National Testing and Research Institute. Interflam 2001. (Interflam '01). International Interflam Conference, 9th Proceedings. Volume 1. September 17-19, 2001, Edinburgh, Scotland, Interscience Communications Ltd., London, England, 755-762 pp, 2001.
  Hostikka, S.; McGrattan, K. B.
• Minimum Mass Flux Requirements to Suppress Burning Surfaces With Water Sprays.
  NISTIR 5795; 50 p. April 1996.
  Yang, J. C.; Boyer, C. I.; Grosshandler, W. L.
• Model for the Burning of a Horizontal Slab of Wood: Status Report.
  NISTIR 5499; September 1994.National Institute of Standards and Technology. Annual Conference on Fire Research: Book of Abstracts. October 17-20, 1994, Gaithersburg, MD, 111-112 pp, 1994.
  Steckler, K. D.; Hamins, A.; Kashiwagi, T.
• Modeling of the Thermal Degradation of Structural Wood Members Exposed to Fire.
  Fire and Materials, Vol. 28, No. 2/4, 199-207, March/August 2004.
  Janssens, M. L.
• Myth of Pyrophoric Carbon.
  Fire Safety Science. Proceedings. Sixth (6th) International Symposium. International Association for Fire Safety Science (IAFSS). July 5-9, 1999, Poitiers, France, Intl. Assoc. for Fire Safety Science, Boston, MA, Curtat, M., Editor(s), 301-312 pp, 2000.
  Cuzzillo, B. R.; Pagni, P. J.
• Numerical Study of Thermal Decomposition and Pressure Generation in Charring Solids Undergoing Opposed-Flow Flame Spread.
  Volume 31; Part 2;Combustion Institute, Symposium (International) on Combustion, 31st. Proceedings. Volume 31. Part 2. August 5-11, 2006, Heidelberg, Germany, Combustion Institute, Pittsburgh, PA, Barlow, R. S.; Sick, V.; Glarborg, P.; Yetter, R. A., Editor(s)(s), 2643-2652 pp, 2007.
  Park, W. C.; Atreya, A.; Baum, H. R.
• Portable Water Mist Fire Extinguishers as an Alternative for Halon 1211.
  NRCC-44693;Halon Options Technical Working Conference. Proceedings. HOTWC 2001. Sponsored by: University of New Mexico, Fire Suppression Systems Assoc., Fire and Safety Group, GlobeTech, Inc., Halon Alternative Research Corp., Hughes Associates, Inc., Kidde plc., Modular Protection, Corp., Next Generation Fire Suppression Technology Program, Sandia National Laboratories, Summit Environmental Corp., Inc. and 3M Specialty Materials. April 24-26, 2001, Albuquerque, NM, Daniels, B. L.; Cole, D. G., Editor(s)(s), 435-439 pp, 2001.
  Liu, Z.; Kim, A. K.; Carpenter, D.; Yen, P. L.
• Predicting the Burning of Wood Using an Integral Model.
  Combustion and Flame, Vol. 123, No. 3, 308-325, November 2000.
  Spearpoint, M. J.; Quintiere, J. G.
• Predicting the Ignition and Burning Rate of Wood in the Cone Calorimeter Using an Integral Model.
  NIST GCR 99-775; 425 p. May 1999.
  Spearpoint, M. J.
• Predicting the Ignition Time and Burning Rate of Thermoplastics in the Cone Calorimeter. January 1995-June 1995.
  NIST GCR 95-677; 191 p. September 1995.
  Hopkins, D., Jr.
• Predicting the Piloted Ignition of Wood in the Cone Calorimeter Using an Integral Model: Effect of Species, Grain Orientation and Heat Flux.
  Fire Safety Journal, Vol. 36, No. 4, 391-415, June 2001.
  Spearpoint, M. J.; Quintiere, J. G.
• Progress in 3-D Modeling of Wood Fire Growth Using a PC. (Abstract/Presentation)
  NIST SP 998; May 2003.
  Dietenberger, M. A.
• Reconstructing the Station Nightclub Fire: Materials Testing and Small-Scale Experiments.
  Volume 2;Interflam 2007. (Interflam '07). International Interflam Conference, 11th Proceedings. Volume 2. September 3-5, 2007, London, England, 1549-1554 pp, 2007.
  Bryner, N. P.; Madrzykowski, D.; Grosshandler, W. L.
• Report on a Study to Utilize the ICAL Apparatus for the Determination of the Effectiveness of Fire Resistant Durable Agents.
  NIST GCR 99-774; OPL Project Number 15933-103926; 59 p. May 1999.
  Grand, A. F.
• Role of Bench-Scale Test Data in Assessing Real-Scale Fire Toxicity.
  NIST TN 1284; 110 p. January 1991.
  Babrauskas, V.; Harris, R. H., Jr.; Braun, E.; Levin, B. C.; Paabo, M.; Gann, R. G.
• Role of Bench-Scale Test Data in Assessing Real-Scale Fire Toxicity.
  NIST TN 1284; 110 p. January 1991.
  Babrauskas, V.; Harris, R. H., Jr.; Braun, E.; Levin, B. C.; Paabo, M.; Gann, R. G.
• Smoke Emission and Burning Rates for Urban Structures.
  Atmospheric Environment, Vol. 25A, No. 11, 2553-2562, 1991.
  Bryner, N. P.; Mulholland, G. W.
• Smoke Production and Properties.
  Chapter 13; Section 2; NFPA HFPE-02;SFPE Handbook of Fire Protection Engineering. 3rd Edition, DiNenno, P. J.; Drysdale, D.; Beyler, C. L.; Walton, W. D., Editor(s), 2/258-268 p., 2002.
  Mulholland, G. W.
• Smoke Production and Properties.
  NFPA SFPE 95; LC Card Number 95-68247;SFPE Handbook of Fire Protection Engineering. 2nd Edition. Section 2. Chapter 15, National Fire Protection Assoc., Quincy, MA, DiNenno, P. J.; Beyler, C. L.; Custer, R. L. P.; Walton, W. D., Editor(s), 2/217-227 p., 1995.
  Mulholland, G. W.
• Smoldering Combustion Propagation on Solid Wood.
  International Association for Fire Safety Science. Fire Safety Science. Proceedings. 3rd International Symposium. July 8-12, 1991, Edinburgh, Scotland, Elsevier Applied Science, New York, Cox, G.; Langford, B., Editor(s)(s), 565-574 pp, 1991.
  Ohlemiller, T. J.
• Some Specialized Areas Where Research Is Needed. (Abstract/Presentation)
  NIST SP 998; May 2003.
  Babrauskas, V.
• Study of Metal Truss Plate Connectors When Exposed to Fire.
  NISTIR 7393; 19 p. January 2007.
  Harman, K. A.; Lawson, J. R.
• Study of the Effectiveness of Fire Resistant Durable Agents on Residential Siding Using the ICAL Apparatus.
  NISTIR 6588; November 2000.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 15th Joint Panel Meeting. Volume 1. Proceedings. March 1-7, 2000, San Antonio, TX, Bryner, S. L., Editor(s), 105-110 pp, 2000.
  Grand, A. F.
• Surface Temperature Measurements on Burning Wood Specimens in the Cone Calorimeter and the Effect of Grain Orientation.
  Fire and Materials, Vol. 17, No. 5, 205-208, September/October 1993.
  Urbas, J.; Parker, W. J.
• Thermal Performance of Masonry Chimneys and Fireplaces.
  NBSIR 87-3515; 175 p. April 1987.
  Peacock, R. D.