Building Publications - manufactured housing

manufactured housing

• Analysis of Moisture Accumulation in Roof Cavities of Manufactured Housing.
  American Society for Testing and Materials. Airflow Performance of Building Envelopes, Components, and Systems. ASTM STP 1255. 1995, ASTM, Philadelphia, PA, Modera, M. P.; Persily, A. K., Editor(s)(s), 156-177 pp, 1995.
  Burch, D. M.
• Experimental Verification of a Moisture and Heat Transfer Model in the Hygroscopic Regime.
  U.S. Department of Energy (DOE); Oak Ridge National Laboratory (ORNL); American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE); Building Environment and Thermal Envelope Council (BETEC). Thermal Performance of the Exterior Envelopes of Building VI Conference. Proceedings. Thermal VI. December 4-8, 1995, Clearwater Beach, FL, 273-282 pp, 1995.
  Burch, D. M.; Zarr, R. R.; Fanney, A. H.
• FutureHome: A Prototype for Factory Housing.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 173-178 pp, 2002.
  Wing, R.; Atkin, B.
• Manufactured Homes - Probability of Failure and the Need for Better Windstorm Protection Through Improved Anchoring Systems.
  NISTIR 5370; 54 p. November 1994.
  Marshall, R. D.
• Manufactured Housing Walls That Provide Satisfactory Moisture Performance in All Climates.
  NISTIR 5558; 33 p. January 1995.
  Burch, D. M.; Saunders, C. A.; TenWolde, A.
• Manufactured Housing Walls That Provide Satisfactory Moisture Performance in All Climates.
  International Building Performance Simulation Association. Building Simulation '95. Building Simulation Conference, 4th Proceedings. August 14-16, 1995, Madison, WI, Intl. Building Performance Simulation Assoc., Mitchell, J. W.; Beckman, W. A., Editor(s)(s), 22-33 pp, 1995.
  Burch, D. M.; TenWolde, A.
• Mathematical Analysis of Moisture and Heat Transfer in the Roof Cavities of Manufactured Housing.
  Challenges of the 21st Century. Roofing Technology, Fourth (4th) International Symposium. Proceedings. First (1st) Edition. U.S. National Institute of Standards and Technology, U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, 390-400 pp, 1997.
  Burch, D. M.; Walton, G. N.; Tsongas, G. A.
• Mathematical Analysis of Practices to Control Moisture in the Roof Cavities of Manufactured Houses.
  NISTIR 5880; 60 p. September 1996.
  Burch, D. M.; Tsongas, G. A.; Walton, G. N.
• Modeling Study of Ventilation in Manufactured Houses.
  NISTIR 6455; 87 p. February 2000.
  Persily, A. K.; Martin, S. R.
• Recommended Performance-Based Criteria for the Design of Manufactured Home Foundation Systems to Resist Wind and Seismic Loads.
  NISTIR 5664; 74 p. August 1995.
  Marshall, R. D.; Yokel, F. Y.
• Suite of Homes Representing The U.S. Housing Stock.
  Ventilation, Humidity Control and Energy Proceedings. Air Infiltration and Ventilation Centre (AIVC) Conference and Building Environment and Thermal Envelope Council (BETEC) Conference, 24th. Proceedings. (International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems Program. Annex V: Air Infiltration and Ventilation Centre.) October 14, 2003, Washington, DC, 15-20 pp, 2003.
  Persily, A. K.; Leber, D.
• Ventilation Characterization of a New Manufactured House.
  Ventilation, Humidity Control and Energy Proceedings. Air Infiltration and Ventilation Centre (AIVC) Conference and Building Environment and Thermal Envelope Council (BETEC) Conference, 24th. Proceedings. (International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems Program. Annex V: Air Infiltration and Ventilation Centre.) October 14, 2003, Washington, DC, 295-300 pp, 2003.
  Persily, A. K.; Crum, E. C.; Nabinger, S. J.; Lubliner, M.
• Ventilation Strategies for U.S. Manufactured Homes.
  Health Buildings 2000, 6th International Conference. Proceedings. Volume 2. Design and Operation of HVAC Systems. August 6-10, 2000, Espoo, Finland, 291-296 pp, 2000.
  Persily, A. K.