Building Titles

All Entries

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X

1

• 1994 Northridge Earthquake: Performance of Structures, Lifelines and Fire Protection Systems.
  NIST SP 862; ICSSC TR-14; 186 p. May 1994.
  Todd, D. R.; Carino, N. J.; Chung, R. M.; Lew, H. S.; Taylor, A. W.; Walton, W. D.; Cooper, J. D.; Nimis, R.
• 1994 Northridge Earthquake: Performance of Structures, Lifelines and Fire Protection Systems.
  NISTIR 5396; 175 p. March 1994.
  Todd, D. R.; Carino, N. J.; Chung, R. M.; Lew, H. S.; Taylor, A. W.; Walton, W. D.

2

• 2-D Analysis of a Building Frame Under Gravity Load and Fire.
  Computational and Experimental Engineering Sciences International Conference (ICCES). ICCES'04. Proceedings. July 26-30-2004, Maderia, Portugal, 1-6 pp, 2004.
  Duthinh, D.

4

• 450 Golden Gate Project: BACnet'sTM First Large-Scale Test.
  ASHRAE Journal, Vol. 40, No. 7, 23-24,26-30, July 1998.
  Applebaum, M. A.; Bushby, S. T.
• 4SIGHT Manual: A Computer Program for Modelling Degradation of Underground Low Level Waste Concrete Vaults.
  NISTIR 5612; 73 p. June 1995.
  Snyder, K. A.; Clifton, J. R.

A

• AASHTO Materials Reference Laboratory: Thirty Years of Service to the Transportation Community.
  TR News, Vol. 183, 22-28, March/April 1996.
  Pielert, J. H.; Spellerberg, P. A.
• Accelerating Scientific Discovery Through Computation and Visualization II.
  Journal of Research of the National Institute of Standards and Technology, Vol. 107, No. 3, 223-245, 2002.
  Sims, J. S.; George, W. L.; Satterfield, S. G.; Hung, H. K.; Hagedorn, J. G.; Ketcham, P. M.; Griffin, T. J.; Hagstrom, S. A.; Franiatte, J. C.; Bryant, G. W.; Jasklski, W.; Martys, N. S.; Bouldin, C. E.; Simmons, V.; Simmons, O. P.; Warren, J. A.; amEnde, B. A.; Koontz, J. E.; Filla, B. J.; Pourprix, V. G.; Copley, S. R.; Bohn, R. B.; Peskin, A. P.; Parker, Y. M.; Parker, J. E.
• Accelerating Scientific Discovery Through Computation and Visualization.
  NISTIR 6709; 25 p. January 22, 2001.Journal of Research of the National Institute of Standards and Technology, Vol. 105, No. 6, 875-894, November/December 2000.
  Sims, J. S.; Hagedorn, J. G.; Ketcham, P. M.; Satterfield, S. G.; Griffin, T. J.; George, W. L.; Fowler, H. A.; Ende, B. A.; Hung, H. K.; Bohn, R. B.; Koontz, J. E.; Martys, N. S.; Bouldin, C. E.; Warren, J. A.; Feder, D. L.; Clark, C. W.; Filla, B. J.; Devaney, J. E.
• Accelerating Scientific Discovery Through Computation and Visualization.
  NISTIR 6709; 25 p. January 22, 2001.Journal of Research of the National Institute of Standards and Technology, Vol. 105, No. 6, 875-894, November/December 2000.
  Sims, J. S.; Hagedorn, J. G.; Ketcham, P. M.; Satterfield, S. G.; Griffin, T. J.; George, W. L.; Fowler, H. A.; Ende, B. A.; Hung, H. K.; Bohn, R. B.; Koontz, J. E.; Martys, N. S.; Bouldin, C. E.; Warren, J. A.; Feder, D. L.; Clark, C. W.; Filla, B. J.; Devaney, J. E.
• Acoustophoretic Characterization of Cement Suspensions.
  Materials and Structures, Vol. 35, 541-549, November 2002.
  Flatt, R. J.; Ferraris, C. F.
• Acquiring, Analyzing, and Using Complete Three-Dimensional Aggregate Shape Information.
  AGGREGATES, Concrete, Bases, and Fines, 9th Annual Symposium. Proceedings. Center for Aggregates Research. April 22-25, 2001, Austin, TX, 1-13 pp, 2001.
  Garboczi, E. J.; Martys, N. S.; Saleh, H. H.; Livingston, R. A.
• Active Fire Protection Systems Issues. (Investigation of Active Fire Protection Systems.)
  Project 4;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 22 pp, 2004.
  Grosshandler, W. L.
• Adaptive Control of a Construction Manipulator.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 449-453 pp, 2002.
  Gradetsky, V.; Rachkov, M.; Pushkin, M.
• Adsorption of Dodecahydroxylated-Fullerene Monolayers at the Air Water Interface.
  Physica B: Condensed Matter, Vol. 283, No. 1/3, 49-52, 2000.
  Liua, W. J.; Jeng, U.; Lin, T. L.; Laib, S. H.; Shih, M. C.; Tsao, C. S.; Wang, L. Y.; Chiang, L. Y.; Sung, L. P.
• Adsorption of Dodecahydroxylated-Fullerene Monolayers at the Air Water Interface.
  Physica B: Condensed Matter, Vol. 283, No. 1/3, 49-52, 2000.
  Liua, W. J.; Jeng, U.; Lin, T. L.; Laib, S. H.; Shih, M. C.; Tsao, C. S.; Wang, L. Y.; Chiang, L. Y.; Sung, L. P.
• Advanced Methods and Models for Describing Coating Appearance.
  Organic Coatings - Waterborne; High Solids; Powder Coatings, 23rd International Conference. Proceedings 23. July 7-11, 1997, Athens, Greece, 307-319 pp, 1997.
  McKnight, M. E.; Martin, J. W.
• Advanced Techniques for Nanocharacterization of Polymeric Coating Surfaces.
  Journal of Coatings Technology Research, Vol. 1, No. 3, 191-200, 2004.
  Gu, X.; Nguyen, T.; Sung, L. P.; Fasolka, M. J.; Martin, J. W.; VanLandingham, M. R.; Jean, Y. C.; Nguyen, D.; Chang, N. K.; Wu, T. Y.
• Advanced Techniques for Nanocharacterization of Polymeric Coating Surfaces.
  Federation of Societies for Coatings Technology (FSCT) Technical Program Annual Meeting, 81st. November 12-14, 2003, Philadelphia, PA, Federation of Societies for Coatings Technology, Blue Bell, PA, 2003.
  Gu, X.; Nguyen, T.; Sung, L. P.; Ho, D. L.; Vanlandingham, M. R.; Jean, Y. C.; Martin, J. W.
• Advanced Versions of Heat Pumps With Zeotropic Refrigerant Mixtures.
  No. 2977;ASHRAE (American Society of Heating, Refrigeration and Air-Conditioning Engineers) Transactions, Vol. 92, No. Part 2, 1986.
  Radermacher, R.
• Advancements in Tele-Robotic Pipelaying.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 217-222 pp, 2002.
  Bernold, L. E.; Li, B.
• Advances in Concrete Mixture Optimisation. Keynote Paper.
  Concrete Durability and Repair Technology Conference. Proceedings. September 8-10, 1999, Scotland, UK, Thomas Telford Publishing, London, England, Dhir, R. K.; McCarthy, M. J., Editor(s)(s), 21-32 pp, 1999.
  Simon, M.; Snyder, K. A.; Frohnsdorff, G. J. C.
• Advances in Materials and Mechanics.
  Advances in Building Technology International Conference. December 4-6, 2002, Hong Kong, China, 3-16 pp, 2002.
  Chong, K. P.; VanLandingham, M. R.; Sung, L. P.
• Advancing Nanoscale Indentation Measurements Toward Quantitative Characterization of Polymer Properties.
  Microscopy and Microanalysis, Vol. 6, No. Suppl. 2:Proceedings, 1108-1109, 2000.
  VanLandingham, M. R.; Villarrubia, J. S.; Meyers, G. F.; Dineen, M.
• Aerodynamic Databases and Electronic Standards for Wind Loads: A Pilot Application.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 506-514 pp, 1998.
  Whalen, T. M.; Simiu, E.; Harris, G.; Lin, J.; Surry, D.
• Agencies Gain a Bridge Lifecycle Assessment Tool.
  Bridge Builder, February/March 1999.
  Ehlen, M. A.
• Air and Pollutant Transport from Attached Garages to Residential Living Spaces.
  NISTIR 7072; 25 p. December 2003.
  Emmerich, S. J.; Gorfain, J. E.; Huang, M.; Howard-Reed, C.
• Air and Pollutant Transport From Attached Garages to Residential Living Spaces: Literature Review and Field Tests.
  International Journal of Ventilation, Vol. 2, No. 3, 265-276, December 2003.
  Emmerich, S. J.; Gorfain, J. E.; Howard-Reed, C.
• Air Change Effectiveness Measurements in Two Modern Office Buildings.
  Indoor Air, Vol. 4, 40-55, 1994.
  Persily, A. K.; Dols, W. S.; Nabinger, S. J.
• Airflow and Radon Transport Modeling in Four Large Buildings.
  CH-95-16-3;ASHRAE Transactions, Vol. 101, No. 1, 1995.
  Fang, J. B.; Persily, A. K.
• Air Force Energy Conservation Handbook. Volume 1. Management Guidelines. Brochure - Home Energy Savings: Tips From Your Base Engineer.
  NBSIR 77-1204; 68 p. January 1977.
  National Bureau of Standards
• Air-Side Velocity Distribution in Finned-Tube Heat Exchangers.
  NISTIR 7474; 67 p. December 2007.
  Yashar, D. A.; Cho, H. H.
• Airtightness of Commercial and Institutional Buildings: Blowing Holes in the Myth of Tight Buildings.
  Airtightness and Airflow in Buildings: Principles. Thermal Envelopes VII Conference. Proceedings. December 6-10, 1998, Clearwater, FL, 829-837 pp, 1998.
  Persily, A. K.
• ALARM 1.0: Decision Support Software for Cost-Effective Compliance With Fire Safety Codes.
  NISTIR 5554; 58 p. December 1994.
  Weber, S. F.; Lippiatt, B. C.
• ALARM 2.0 Users Manual: Minimizing Compliance Costs of the Life Safety Code for Prisons.
  NISTIR 6807; 44 p. November 2001.
  Weber, S. F.; Schultz, L. I.
• Algorithm for Computing the Effective Linear Elastic Properties of Heterogeneous Materials: Three-Dimensional Results for Composites With Equal Phase Poisson Ratios.
  Journal of the Mechanics and Physics of Solids, Vol. 43, No. 9, 1349-1362, 1995.
  Garboczi, E. J.; Day, A. R.
• Alkali-Silica Reaction and High Performance Concrete.
  NISTIR 5742; 24 p. August 1995.
  Ferraris, C. F.
• American Red Cross: Centers for Disease Control and Prevention Health Impact Surveillance System for Natural Disasters.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 275-285 pp, 1998.
  Paz-Argandona, E.; Malilay, J.
• Analysis of CCRL Proficiency Cements 135 and 136 Using CEMHYD3D.
  NISTIR 6545; 23 p. August 2000.
  Bentz, D. P.; Feng, X.; Haecker, C. J.; Stutzman, P. E.
• Analysis of CCRL Proficiency Cements 151 and 152 Using the Virtual Cement and Concrete Testing Laboratory.
  Cement and Concrete Research, Vol. 36, No. 8, 1548-1555, August 2006.
  Bullard, J. W.; Stutzman, P. E.
• Analysis of Cost-Sharing Programs for Pollution Abatement of Municipal Wastewater. Final Report.
  NBSIR 74-479; September 1974.
  Marshall, H. E.; Ruegg, R. T.
• Analysis of Moisture Accumulation in Roof Cavities of Manufactured Housing.
  American Society for Testing and Materials. Airflow Performance of Building Envelopes, Components, and Systems. ASTM STP 1255. 1995, ASTM, Philadelphia, PA, Modera, M. P.; Persily, A. K., Editor(s)(s), 156-177 pp, 1995.
  Burch, D. M.
• Analysis of Partially Grouted Masonry Shear Walls.
  NIST GCR 97-710; 45 p. March 1997.
  Shing, P. B.; Cao, L.
• Analysis of Pore Pressure, Thermal Stress and Fracture in Rapidly Heated Concrete.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B10. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 155-164 pp, 1997.
  Bazant, Z. P.
• Analysis of Sea-Floor Earthquake Data.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 97-115 pp, 1998.
  Smith, C. E.; Boore, D. M.
• Analysis of Structural Steel Update. (Mechanical and Metallurgical Analysis of Structural Steel.)
  Project 3;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 15 pp, 2004.
  Gayle, F. W.
• Analysis of the ASTM Round-Robin Test on Particle Size Distribution of Portland Cement: Phase 1.
  NISTIR 6883; 55 p. May 2002.
  Ferraris, C. F.; Hackley, V. A.; Aviles, A. I.; Buchanan, C. E., Jr.
• Analysis of the ASTM Round-Robin Test on Particle Size Distribution of Portland Cement: Phase 2.
  NISTIR 6931; 64 p. December 2002.
  Ferraris, C. F.; Hackley, V. A.; Aviles, A. I.; Buchanan, C. E., Jr.
• Analysis of the Impedance Spectra of Short Conductive Fiber-Reinforced Composites.
  Journal of Materials Science, Vol. 36, No. 16, 4003-4012, August 2001.
  Torrents, J. M.; Mason, T. O.; Peled, A.; Shah, S. P.; Garboczi, E. J.
• Analysis of the Single-Fiber Fragmentation Test.
  Journal of Materials Science, Vol. 33, 1-8, 1998.
  Lee, S.; Nguyen, T.; Chin, J. W.; Chuang, T. J.
• Analysis of Ventilation Data from the U.S. Environmental Protection Agency Building Assessment Survey and Evaluation (BASE) Study.
  NISTIR 7145-Revised; 122 p. November 2008.
  Persily, A. K.; Gorfain, J.
• Analysis of Wind and Wind Effects Revisited: A Case Study of Deer Isle-Sedgwick Bridge.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 379-391 pp, 1998.
  Marsh, D. W.; Bienkiewicz, B.; Bosch, H. R.
• Analytical Approach for Investigating the Causes of Spalling of High-Strength Concrete at Elevated Temperatures.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B6. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 95-108 pp, 1997.
  Ahmed, G. N.; Hurst, J. P.
• Analytical Formulas for Interfacial Transition Zone Properties.
  Advanced Cement Based Materials, Vol. 6, 99-108, 1997.
  Garboczi, E. J.; Bentz, D. P.
• Analytical Modeling for Soil-Structure Interaction of a 6-Story Commercial Office Building.
  Earthquake Engineering Research Institute. Earthquake Awareness and Mitigation Across the Nation. U.S. National Conference, Fifth (5th). Proceedings. Volume 1. July 10-14, 1994, Chicago, IL, 199-208 pp, 1994.
  Phan, L. T.; Hendrickson, E. M.; Marshall, R. D.; Celebi, M.
• Analytical Study of Residential Buildings With Reflective Roofs.
  NISTIR 6228; 80 p. October 1998.
  Zarr, R. R.
• An Efficient Large Eddy Simulation Algorithm for Computational Wind Engineering: Application to Surface Pressure Computations on a Single Building.
  NISTIR 6371; 33 p. August 1999.
  Rehm, R. G.; McGrattan, K. B.; Baum, H. R.; Simiu, E.
• Annual Progress Report for Streamlining the Nation's Building Regulatory Process Project. For Grant Period: December 1997 to October 1998.
  NIST GCR 98-764; 58 p. October 1998.
  National Conference of States on Building Codes and Standards, Inc.
• Annual Progress Report for Streamlining the Nation's Building Regulatory Process Project. For Grant Period: September 1998 to September 1999.
  NIST GCR 99-785; 62 p. October 1999.
  National Conference of States on Building Codes and Standards, Inc.
• Annual Progress Report for Streamlining the Nation's Building Regulatory Process Project. September 1996-November 1997.
  NIST GCR 98-741; 87 p. December 1997.
  Wible, R.; Cote, M.
• Appendices: Development of Procedures to Enhance the Performance of Rehabilitated URM Buildings.
  NIST GCR 97-724-2; 336 p. August 1997.
  Lizundia, B.; Holmes, W. T.; Longstreth, M.; Kren, A.; Abrams, D. P.
• Applicability of Modern Analytical Techniques to Detection of Changes in Roofing Membrane Materials Brought About By Heat Aging.
  International Waterproofing Association. International Congress, 9th. April 26-28, 1995, Amsterdam, Netherlands, International Waterproofing Association, 244-242 pp, 1995.
  Rossiter, W. J., Jr.; Byrd, W. E.; Roberts, W. E.; Bailey, D. M.
• Application of a 3D Scanner in the Representation of Building Construction Site.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 337-342 pp, 2002.
  Shih, N. J.
• Application of a Multi-Zone Airflow and Contaminant Dispersal Model to Indoor Air Quality Control in Residential Buildings.
  AIVC Conference, 15th. The Role of Ventilation. September 27-30, 1994, 494-507 pp, 1994.
  Emmerich, S. J.; Persily, A. K.; Walton, G. N.
• Application of an Evolution Program for Refirgerant Circuitry Optimization.
  Challenges to Sustainability. ACRECONF 2007. Proceedings. December 7-8, 2007, New Delhi, India, 1-16 pp, 2007.
  Domanski, P. A.; Yashar, D. A.
• Application of Chaotic Dynamics to Stochastic Resonance.
  Probabilistic Mechanics and Structural Reliability. Proceedings of the Seventh (7th) Specialty Conference. American Society of Civil Engineers. August 7-9, 1996, Worcester, MA, American Society of Civil Engineers, New York, NY, Frangopol, D. M.; Grigoriu, M. D., Editor(s)(s), 86-89 pp, 1996.
  Franaszek, M.; Simiu, E.
• Application of Composites in California Bridges Quality Control Specifications and Testing Program.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/1-10 pp, 1999.
  Roberts, J. E.
• Application of Control Charts for Detecting Faults in Variable-Air-Volume Boxes.
  KC-03-8-1;ASHRAE Annual Meeting 2003, Kansas City, 671-682 pp, 2003.ASHRAE Transactions, Vol. 109, No. 2, 2003.
  Schein, J.; House, J. M.
• Application of Digital-Image-Based Models to Microstructure, Transport Properties, and Degradation of Cement-Based Materials.
  Modelling of Microstructure and Its Potential for Studying Transport Properties and Durability. 1996, Kluwer Academic Publishers, Jennings, H., Editor(s), 167-185 pp, 1996.
  Bentz, D. P.; Garboczi, E. J.; Martys, N. S.
• Application of HFCs as Refrigerants.
  International Congress of Refrigeration, 20th Proceedings. September 19-24, 1999, Sydney, Australia, [pages unknown] pp, 1999.
  Didion, D. A.
• Application of Life-Cycle Cost Analysis to Homeland Security Issues in Constructed Facilities: A Case Study.
  NISTIR 7025; 87 p. October 2003.
  Chapman, R. E.
• Application of MatML to Contaminant Emissions Data.
  ASTM Standardization News, 52-59, October 2005.
  Begley, E.; Howard-Reed, C.
• Application of the Carnahan-Starling-DeSantis Equation of State to Mixtures of Refrigerants.
  86-WA/HT-59; 1986.Winter Annual Meeting. American Society of Mechanical Engineers. December 7-12, 1986, Anaheim, CA, 1986.
  Morrison, G.; McLinden, M. O.
• Application Protocol 227 Validation Report Version 1.0.
  NISTIR 5875; 86 p. August 1996.
  Kline, S. W.; Palmer, M. E.
• Applications of Computers and Information Technology.
  Handbook of Analytical Techniques in Concrete Science and Technology: Principles, Techniques and Applications. Chapter 18, Noyes Publications/William Andrew Publishing, LCC, Norwich, NY, Ramachandran, V. S.; Beaudoin, J. J., Editor(s), 765-799 p., 2001.
  Clifton, J. R.; Frohnsdorff, G. J. C.
• Applications of the NIST ROBOCRANE.
  Robotics and Manufacturing, Vol. 5, 403-407, 1994.
  Bostelman, R.; Albus, J.; Pagalakis, N.; Jacoff, A.; Gross, J. L.
• Approach for Measuring Reductions in Construction Worker Illnesses and Injuries: Baseline Measures of Construction Industry Practices for the National Construction Goals.
  NISTIR 6473; 145 p. September 2000.
  Chapman, R. E.
• Approach for Measuring Reductions in Delivery Time: Baseline Measures of Construction Industry Practices for the National Construction Goals.
  NISTIR 6189; 212 p. July 1998.
  Chapman, R. E.; Rennison, R.
• Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs: Baseline Measures of Construction Industry Practices for the National Construction Goals.
  NISTIR 6185; 377 p. July 1998.
  Chapman, R. E.; Rennison, R.
• Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs for Educational Facilities.
  NISTIR 6770; 70 p. January 2002.
  Chapman, R. E.
• Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs for Educational Facilities.
  NISTIR 6770; 70 p. January 2002.
  Chapman, R. E.
• Approach to the Design of Natural and Hybrid Ventilation Systems for Cooling Buildings.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 836-841 pp, 2002.
  Axley, J. W.; Emmerich, S. J.; Dols, W. S.; Walton, G. N.
• Architecture for Discrete Construction Component Tracking.
  Automation and Robotics in Construction, 16th IAARC/IFAC/IEEE International Symposium. ISARC'99. Proceedings. September 22-24, 1999, Madrid, Spain, Universidad Carlos III de Madrid (UC3M), Spain, Balaguer, C., Editor(s), 289-294 pp, 1999.
  Furlani, K. M.; Stone, W. C.
• Are Serviceability Requirements Covered Adequately in Current Codes and Standards?
  CTBUH2005;Renewing the Urban Landscape. 7th World Congress. Council on Tall Buildings and Urban Habitat (CTBUH2005). Proceedings. October 16-19, 2005, New York City, NY, 2005.
  Lew, H. S.
• Argument for Using Coarse Cements in High-Performance Concretes.
  Cement and Concrete Research, Vol. 29, 615-618, 1999.
  Bentz, D. P.; Haecker, C. J.
• Artificial Intelligence Based Quality Control of Aggregate Production.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 369-374 pp, 2002.
  Kim, H.; Haas, C. T.; Rauch, A. F.
• ASCE Standards on Structural Condition Assessment and Rehabilitation of Buildings.
  American Society for Testing and Materials. Standards for Preservation and Rehabilitation. ASTM STP 1258. 1996, Kelley, S. J., Editor(s), 126-136 pp, 1996.
  Pielert, J. H.; Baumert, C.; Green, M.
• ASHRAE/NIST Refrigerants Conference: Refrigerants for the 21st Century. Gaithersburg MD, October 6-7, 1997. Conference Report.
  Journal of Research of the National Institute of Standards and Technology, Vol. 103, No. 5, 1-5, September/October 1998.
  Domanski, P. A.
• Asphalt Quality Parameters Tracability Using Electronic Tags and GPS.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 155-160 pp, 2002.
  Peyret, F.; Tasky, R.
• Assembly + Disassembly of Interior Wall.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 299-302 pp, 2002.
  Hanser, A.
• Assessment of Uncertainties for the NIST 1016 mm Guarded-Hot-Plate Apparatus: Extended Analysis for Low-Density Fibrous-Glass Thermal Insulation.
  NIST TN 1606; NIST Technical Note 1606; 55 p. February 2009.
  Zarr, R. R.
• Assessment of Wind Load Factors for Hurricane-Prone Regions.
  Structural Safety, Vol. 20, 271-281, 1998.
  Whalen, T. M.; Simiu, E.
• Assessment, Strengthening, and Repair Technologies for Buildings, Industrial Facilities, and Lifelines.
  Common Agenda for Cooperation in Global Perspective. U.S./Japan Earthquake Policy Symposium, 2nd Proceedings. September 17-19, 1997, Kobe, Japan, National Land Development, Tokyo, Japan, 206-216 pp, 1998.
  Wright, R. N.
• Auditory Nerve Fiber Modeling: A Stochastic Melnikov Approach.
  Physical Review E, Vol. 57, No. 5, 5870-5876, May 1998.
  Franaszek, M.; Simiu, E.
• AUTMOD3: A Planning Tool for Modular Building System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 91-96 pp, 2002.
  Padron, V. M.; Cardenas, O.; Diez, R.; Abderrahim, M.; Balaguer, C.
• AutoBid 2.0: The Microcomputer System for Police Patrol Vehicle Selection.
  NISTIR 5787; Project NIJ95-008; 10 p. February 1996.
  Weber, S. F.
• AutoBid: System for Police Patrol Selection.
  Computer Program; November 2001.
  Weber, S. F.; Rushing, A. S.
• Automated Construction Using Contour Crafting: Applications on Earth and Beyond.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 489-494 pp, 2002.
  Khoshnevis, B.; Bekey, G.
• Automated Data Acquisition and Planning of Highway Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 149-154 pp, 2002.
  Hassanein, A.; Moselhi, O.
• Automated DSS for Lighting Design of Nightime Operations in Highway Construction Projects.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 135-140 pp, 2002.
  El-Rayes, K.; Hyari, K.
• Automated Earthmoving Status Determination.
  Robotics 2000. ASCE Conference on Robotics for Challenging Environments. February 28-March 2, 2000, Albuquerque, NM, 2000.
  Stone, W. C.; Cheok, G. S.; Lipman, R. R.
• Automated Inspection of Utility Pipes: A Solution Strategy for Data Management.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 531-536 pp, 2002.
  Shehab-Eldeen, T.; Moselhi, O.
• Automated Part Tracking on the Construction Job Site.
  Robotics 2000. ASCE Conference on Robotics for Challenging Environments. February 28-March 2, 2000, Albuquerque, NM, 2000.
  Stone, W. C.; Pfeffer, L. E.; Furlani, K. M.
• Automated Selecting Subcontractor Model in E-Commerce.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 47-52 pp, 2002.
  Lin, P. H.
• Automated Tracking of Structural Steel Members at the Construction Site.
  Automation and Robotics in Construction, 17th International Symposium. Proceedings. 2000, 1201-1206 pp, 2000.
  Furlani, K. M.; Pfeffer, L. E.
• Automatic Detection of Significant Variation From Designed Intent Utilizing Survey Data CIAMS: Construction Information and Management System.
  Automation and Robotics in Construction, 17th International Symposium. Proceedings. 2000, 2000.
  Latimer, D. T., IV; Hammond, O.; Hallon, R.; Stidsen, C. T.; Lam, S. L.
• Automatic Steering System for Rotary Snow Removers.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 443-448 pp, 2002.
  Hirashita, H.; Arai, T.; Yoshida, T.
• Automation Consideration During Project Design.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 197-202 pp, 2002.
  Hewitt, M. M.; Gambatese, J. A.
• Automation in Building Design With Spatial Information.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 179-184 pp, 2002.
  Nguyen, T. H.; Oloufa, A. A.
• Automation Infrastructure System for a Robotic 30-Ton Bridge Crane.
  Robotics 98 Conference Proceedings. American Society of Civil Engineers. April 26-30, 1998, Albuquerque, NM, 195-201 pp, 1998.
  Stone, W. C.; Pfeffer, L. E.
• Automation Infrastructure System for a Robotic 30-Ton Bridge Crane.
  Robotics 98 Conference Proceedings. American Society of Civil Engineers. April 26-30, 1998, Albuquerque, NM, 195-201 pp, 1998.
  Stone, W. C.; Pfeffer, L. E.

B

• BACnet: A Technical Update.
  ASHRAE Journal, Vol. 36, No. 1, 72-86, January 1994.
  Bushby, S. T.; Newman, H. M.
• BACnetRG at Georgia Tech.
  BACnetRG Today (A Supplement to ASHRAE Journal), Vol. 49, No. 11, B18-B23, November 2007.
  Alexander, D. P.; Ejimofor, C.; Holmberg, D. G.
• BACnetRG Measures Up.
  ; November 2007.BACnetRG Today (A Supplement to ASHRAE Journal), Vol. 49, No. 11, B11-B14.
  Bushby, S. T.
• BACnet(trademark): A Standard Communication Infrastructure for Intelligent Buildings.
  Automation in Construction, Vol. 6, 529-540, 1997.
  Bushby, S. T.
• BACnet Wide Area Network Security Threat Assessment.
  NISTIR 7009; 20 p. July 2003.
  Holmberg, D. G.
• Balancing the Environmental and Economic Performance of Products.
  Environmental Design and Construction, 24-26,110-111, November/December.
  Lippiatt, B. C.; Boyles, A. S.
• Baseline Measures for Improving Housing Durability.
  NISTIR 6870; 120 p. September 2002.
  Chapman, R. E.; Izzo, C. A.
• Baseline Structural Performance and Aircraft Impact Damage Analysis.
  Project 2;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 96 pp, 2004.
  Sadek, F.; Simiu, E.; Riley, M. A.; Fritz, W.; Lew, H. S.
• Beam-to-Column Connections for Precast Concrete Moment-Resisting Frames.
  Precast Seismic Structural Systems, 4th Joint Technical Coordinating Committee, Proceedings. May 16-17, 1994, Tsukuba, Japan, 1-8 pp, 1994.
  Cheok, G. S.; Stone, W. C.; Stanton, J.; Seagren, D.
• BEES 1.0: Building for Environmental and Economic Sustainability Technical Manual and User Guide.
  NISTIR 6144; 93 p. April 1998.
  Lippiatt, B. C.
• BEES 2.0 Building for Environmental and Economic Sustainability. Peer Review Report.
  NISTIR 6865; 42 p. April 2002.
  Curran, M. A.; Overly, J. G.; Hofstetter, P.; Muller, R.; Lippiatt, B. C.
• BEES 2.0 Building for Environmental and Economic Sustainability. Technical Manual and User Guide.
  NISTIR 6520; 150 p. June 2000.
  Lippiatt, B. C.
• BEES (Building for Environmental and Economic Sustainability): Balancing Environmental and Economic Performance.
  Construction Specifier, 35-42, April 1998.
  Lippiatt, B. C.
• BEES Model for Selecting Environmentally and Economically Balanced Building Products.
  Environmental and Economic Balance: The 21st Century Outlook. Proceedings. American Institute of Architects, U.S. Green Building Council and U.S. Department of Energy. November 6-9, 1997, Miami, FL, 1-8 pp, 1997.
  Lippiatt, B. C.
• BEES Model for Selecting Environmentally and Economically Balanced Building Products.
  Environmental and Economic Balance: The 21st Century Outlook. Proceedings. American Institute of Architects, U.S. Green Building Council and U.S. Department of Energy. November 6-9, 1997, Miami, FL, 1-8 pp, 1997.
  Lippiatt, B. C.
• BEESRG 4.0: Building for Environmental and Economic Sustainability Technical Manual and User Guide.
  NISTIR 7423; 327 p. May 2007.
  Lippiatt, B. C.
• Bending Performance of Masonry Walls Strengthened With Near-Surface Mounted FRP Bars.
  North American Masonry Conference, 9th. Proceedings. June 1-4, 2003, Clemson, SC, 1052-1063 pp, 2003.
  Bajpai, K.; Kuthinh, D.
• Benefit-Cost Analysis of Residential Fire Sprinkler Systems.
  NISTIR 7451; 67 p. September 2007.
  Butry, D. T.; Brown, M. H.; Fuller, S. K.
• Benefits and Costs of Research: A Case Study of Construction Systems Integration and Automation Technologies in Commercial Buildings.
  NISTIR 6763; 183 p. December 2001.
  Chapman, R. E.
• Benefits and Costs of Research: A Case Study of Construction Systems Integration and Automation Technologies in Industrial Facilities.
  NISTIR 6501; 175 p. June 2000.
  Chapman, R. E.
• Benefits and Costs of Research: A Case Study of Cybernetic Building Systems.
  NISTIR 6303; 167 p. March 1999.
  Chapman, R. E.
• Benefits and Costs of Research: A Case Study of the Fire Safety Evaluation System.
  NISTIR 5863; 85 p. July 1996.
  Chapman, R. E.; Weber, S. F.
• Benefits and Costs of Research: Two Case Studies in Building Technology.
  NISTIR 5840; 109 p. July 1996.
  Chapman, R. E.; Fuller, S. K.
• Best Practices for Reducing the Potential for Progressive Collapse in Buildings.
  NISTIR 7396; 216 p. February 2007.
  Ellingwood, B. R.; Smilowitz, R.; Dusenberry, D. O.; Duthinh, D.; Lew, H. S.; Carino, N. J.
• Beyond WEBCAM: A Site-Web-Site for Building Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 21-26 pp, 2002.
  Nuntasunti, S.; Bernold, L. E.
• BLCC 5.0-01.
  Computer Program; April 2001.
  Fuller, S. K.; Boyles, A. S.
• BLCC: The NIST "Building Life-Cycle Cost" Program, Version 4.3 User's Guide and Reference Manual.
  NISTIR 5185-3; 33 p. October 1995.
  Petersen, S. R.
• Boiling With Refrigerants and Nanolubricants.
  Seminar 51 (Advanced) Nanofluids for HVAC&R. Proceeding. 2008, 1-22 pp, 2008.
  Kedzierski, M. A.
• Breakup of a Fluid Thread in a Confined Geometry: Droplet-Plug Transition Perturbation Sensitivity and Kinetic Stabilization With Confinement .
  056312;Physical Review E, Vol. 69, No. 4, 056312/1-18, May 2004.
  Hagedorn, J. G.; Martys, N. S.; Douglas, J. F.
• BridgeLCC 1.0 Users Manual. Life-Cycle Costing Software for Preliminary Bridge Design.
  NISTIR 6298; 84 p. April 30, 1999.
  Ehlen, M. A.
• Brief Guide to Internet Resources for Coatings-Related Regulations and Associated-Coatings Information.
  Steel Structures Painting Council (SSPC). Technologies for a Diverse Industry. SSPC 1996 Seminars. Proceedings. SSPC 96-08. November 17-21, 1996, Charlotte, NC, 1996.
  McKnight, M. E.
• Building and Fire Research at NBS/NIST, 1975-2000.
  NIST BSS 179; 347 p. December 2003.
  Wright, R. N.
• Building and Fire Research at NBS/NIST, 1975-2000.
  NIST BSS 179; 347 p. December 2003.
  Wright, R. N.
• Building and Fire Research Laboratory Accomplishments, 1995-1996.
  NIST SP 838-11; 44 p. March 1997.
  Fowell, A. J.
• Building and Fire Research Laboratory Activities, Accomplishments, and Recognitions 1997.
  NIST SP 838-14; 48 p. March 1998.
  Fowell, A. J.
• Building and Fire Research Laboratory Activities, Accomplishments, and Recognitions 1997.
  NIST SP 838-14; 48 p. March 1998.
  Fowell, A. J.
• Building and Fire Research Laboratory Activities, Accomplishments, and Recognitions 1998.
  NIST SP 838-15; 57 p. January 1999.
  Raufaste, N. J., Jr.
• Building and Fire Research Laboratory Activities, Accomplishments, and Recognitions 1999.
  NIST SP 838-16; 53 p. February 2000.
  Fowell, A. J.
• Building and Fire Research Laboratory Activities, Accomplishments, and Recognitions 2000-2001.
  NIST SP 838-17; 60 p. January 2002.
  Fowell, A. J.
• Building and Fire Research Laboratory Activities, Accomplishments, and Recognitions 2000-2001.
  NIST SP 838-17; 60 p. January 2002.
  Fowell, A. J.
• Building and Fire Research Laboratory Activities, Accomplishments, and Recognitions 2003.
  NIST SP 838-18; 78 p. February 2004.
  Beall, K. A.; Hill, J. E.
• Building and Fire Safety : Responding to the World Trade Center Disaster.
  TS 3-7-5 Fire Engineering (1);Tall Buildings in Historical Cities: Culture and Technology for Sustainable Cities. Volume 2. Proceedings. Council on Tall Buildings and Urban Habitat (CTBUH) 2004 Seoul Conference. October 10-13, 2004, Seoul, Korea, Lee, L. H.; Klemencic, R.; Kim, S. D., Editor(s)(s), 1137-1149 pp, 2004.
  Shyam Sunder, S.
• Building for Environmental and Economic Sustainability (BEES).
  CIB World Building Congress 1998: Construction and the Environment. Proceedings. International Council for Building Research Studies and Documentation. June 7-12, 1998, Gavle, Sweden, 779-788 pp, 1998.
  Lippiatt, B. C.
• Building for Environmental and Economic Sustainability (BEES): Software for Selecting Cost-Effective Green Building Products.
  Performance in Product and Practice. CIB (International Council for Innovation and Research in Building and Construction) World Building Congress. Paper 151. Proceedings. April 2-6, 2001, Wellington, New Zealand, 1-8 pp, 2001.
  Lippiatt, B. C.; Boyles, A. S.
• Building Information for Emergency Responders.
  Systemics, Cybernetics and Informatics, 11th World Multi-Conference (WMSCI 2007). Proceedings. Volume 3. Jointly with the Information Systems Analysis and Synthesis: ISAS 2007, 13th International Conference. July 8-11, 2007, Orlando, FL, Callaos, N.; Lesso, W.; Zinn, C. D.; Yang, H., Editor(s)(s), 1-6 pp, 2007.
  Treado, S. J.; Vinh, A.; Holmberg, D. G.; Galler, M.
• Building Information Services And Control System (BISACS): Technical Documentation, Revision 1.0.
  NISTIR 7466; 47 p. November 2007.
  Vinh, A.
• Building Integrated Photovoltaic Test Facility.
  ASME Journal of Solar Energy Engineering, Special Issue: Solar Thermochemical Processing, Vol. 123, No. 2, 194-199, August 2001.
  Fanney, A. H.; Dougherty, B. P.
• Building Integrated Photovoltaic Test Facility.
  ASME Journal of Solar Energy Engineering, Special Issue: Solar Thermochemical Processing, Vol. 123, No. 2, 194-199, August 2001.
  Fanney, A. H.; Dougherty, B. P.
• Building on Sinkholes: Design and Construction of Foundations in Karst Terrain by George F. Sowers. Book Review.
  Journal of Architectural Engineering, Vol. 3, No. 3, 143, September 1997.
  Andrus, R. D.
• Building Retrofits for Increased Protection Against Airborne Chemical and Biological Releases.
  NISTIR 7379; 179 p. March 2007.
  Persily, A. K.; Chapman, R. E.; Emmerich, S. J.; Dols, W. S.; Davis, H.; Lavappa, P.; Rushing, A. S.
• Building Stones of America: 50 Years of the NIST Stone Test Wall.
  NCPTT Notes, No. 36, 7,9,11, July 2000.
  Stutzman, P. E.; Raz, J.
• Building Stones of America: Over 50 Years of the NIST Stone Test Wall.
  Masonry Magazine, Vol. 43, No. 10, October 2004.
  Stutzman, P. E.

C

• C30 Self-Assemblied Monolayers on Silica, Titania, and Zirconia: HPLC Performance, Atomic Force Microscopy, Ellipsometry, and NMR Studies of Molecular Dynamcis and Uniformity of Coverage.
  Journal of the American Chemical Society, Vol. 122, No. 29, 6997-7011, 2000.
  Pursch, M.; Vanderhart, D. L.; Sander, L. C.; Gu, X.; Nguyen, T.; Wise, S. A.; Gajewski, D. A.
• Calculation of Ionic Diffusion Coefficients on the Basis of Migration Test Results.
  Materials and Structures, Vol. 36, No. 257, 156-165, April 2003.
  Samson, E.; Marchand, J.; Snyder, K. A.
• Calculation of Obstructed View Factors by Adaptive Integration.
  NISTIR 6925; 22 p. November 2002.
  Walton, G. N.
• Calibration Experiments of a Laser Scanner.
  NISTIR 6922; 121 p. September 2002.
  Cheok, G. S.; Leigh, S.; Rukhin, A.
• Calibration of a Calorimeter for Thermal Resistance Measurements of Advanced Insulation Panels.
  HVAC&R Research, Vol. 6, No. 3, 1-12, July 2000.
  Ellis, M. W.; Fanney, A. H.; Davis, M. W.
• Calibration of Thin Heat Flux Sensors for Building Applications Using ASTM C 1130.
  Journal of Testing and Evaluation, Vol. 29, No. 3, 293-300, May 2001.
  Zarr, R. R.; Martinez-Fuentes, V.; Filliben, J. J.; Dougherty, B. P.
• Calorimetric and Visual Measurements of R123 Pool Boiling on Four Enhanced Surfaces.
  NISTIR 5732; 59 p. November 1995.
  Kedzierski, M. A.
• Caltrans Specifications. Appendix 3.1B.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/39-58 pp, 1999.
  Caltrans
• Capillary Porosity Depercolation/Repercolation in Hydrating Cement Pastes Via Low-Temperature Calorimetry Measurements and CEMHYD3D Modeling.
  Journal of The American Ceramic Society, Vol. 89, No. 8, 2606-2611, August 2006.
  Bentz, D. P.
• Capillary Transport in Mortars and Concrete.
  Cement and Concrete Research, Vol. 27, No. 5, 747-760, 1997.
  Martys, N. S.; Ferraris, C. F.
• Capital Facilities Information Handover Guide. Part 1.
  NISTIR 7259; 91 p. January 2006.
  Fallon, K. K.; Palmer, M. E.
• Capitalizing on Early Project Opportunities to Improve Facility Life-Cycle Performance.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 73-78 pp, 2002.
  Kam, C.; Fischer, M.; Hanninen, R.; Lehto, S.; Laitinen, J.
• Carbon Monoxide Dispersion in Residential Buildings: Literature Review and Technical Analysis.
  NISTIR 5906; 74 p. October 1996.
  Persily, A. K.
• Case Study: Using the Wearable Computer in the Construction Industry.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 551-556 pp, 2002.
  Fuller, S.; Ding, Z.; Sattineni, A.
• Cation Diffusion at the Polymer Coating/Metal Interface.
  Journal of Adhesion Science Technology, Vol. 9, No. 7, 935-951, 1995.
  Pommersheim, J. M.; Nguyen, T.; Zhang, Z.; Lin, C.
• Causes of the Apparent Heat Transfer Degradation for Refrigerant Mixtures.
  HTD-Vol. 197;American Society of Mechanical Engineers. Two-Phase Flow and Heat Tranfers, 1992. National Heat Transfer Conference, 28th. HTD-Vol. 197. August 9-12, 1992, San Diego, CA, ASME, New York, Kim, J. H.; Nelson, R. A.; Hashemi, A., Editor(s)(s), 149-158 pp, 1992.
  Kedzierski, M. A.; Kim, J. H.; Didion, D. A.
• Cement and Concrete Standards of the Future. Report From the Workshop on Cement and Concrete Standards of the Future October 11-12, 1995.
  NISTIR 5933; 54 p. April 1997.
  Frohnsdorff, G. J. C.; Clifton, J. R.
• Cement Hydration: Building Bridges and Dams at the Microstructure Level.
  Advanced Cement-Based Materials: Research and Teaching. Knud Hojgaard Conference. Proceedings. June 12-15, 2005, Lyngby, Denmark, Jensen, O. M.; Geiker, M.; Stang, H., Editor(s)(s), 135-146 pp, 2005.
  Bentz, D. P.
• Cement Hydration: Building Bridges and Dams at the Microstructure Level.
  Advanced Cement-Based Materials: Research and Teaching. Knud Hojgaard Conference. Proceedings. June 12-15, 2005, Lyngby, Denmark, Jensen, O. M.; Geiker, M.; Stang, H., Editor(s)(s), 135-146 pp, 2005.
  Bentz, D. P.
• Cement Hydration in the Presence of Municipal Solid Waste Incineration Fly Ash.
  Material Science and Concrete Properties, 1st International Meeting. Proceedings. March 5-6, 1998, Toulouse, France, 63-70 pp, 1998.
  Remond, S.; Bentz, D. P.; Pimienta, P.; Bournazel, J. P.
• CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modelling Package. Version 2.0.
  NISTIR 6485; 241 p. April 2000.
  Bentz, D. P.
• Challenges in Developing Environmentally Safe Heat Pumping Systems.
  ZSITS International Thermal Science Seminar, American Society of Mechanical Engineers (ASME) Proceedings. June 11-13, 2000, Bled, Slovenia, 1-10 pp, 2000.
  Didion, D. A.; Brown, J. S.
• Chaotic Behavior of Coastal Currents Due to Random Wind Forcing.
  94CH3472-8;Oceanic Engineering Society of the Institute of Electrical and Electronics Engineers, Inc. by the Societe des Electriciens et Electroniciens de France, and by la Communaute Urbaine de Brest. OCEANS 94. Oceans Engineering for Today's Technology and Tomorrow' Preservation. Proceedings. Volume 3. 1994, III/11-16 pp, 1994.
  Simiu, E.
• Chaotic Resonnce: Hopping Rates, Spectra and Signal-to-Noise Ratios.
  Stochastic and Chaotic Dynamics in the Lakes: STOCHAOS. CP502, American Institute of Physics, Broomhead, D. S.; Luchinskaya, E. A.; McClintock, P. V. E.; Mullin, T., Editor(s)(s), 428-433 pp, 2000.
  Kovaleva, A.; Simiu, E.
• Chaotic Transitions in Deterministic and Stochastic Dynamical Systems: Application of Melnikov Processes in Engineering, Physics, and Neuroscience.
  Structural Dynamics, 5th European Conference. EURODYN2002. Proceedings. Septemer 2-5, 2002, Munich, Germany, 179-183 pp, 2002.
  Simiu, E.
• Characterization of Chemical Heterogeneity in Polymer Systems Using Hydrolysis and Tapping-Mode Atomic Force Microscopy.
  Journal of Polymer Science: Part B, Polymer Physics, Vol. 39, No. 13, 1460-1470, 2001.
  Raghavan, D.; Gu, X.; Nguyen, T.; VanLandingham, M. R.
• Characterization of Coating Microstructure Using Laser Scanning Confocal Microscopy.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, 343-344 pp, 2000.
  Sung, L. P.; Nadal, M. E.; Stutzman, P. E.; McKnight, M. E.
• Characterization of Coating Microstructure Using Laser Scanning Confocal Microscopy.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, 343-344 pp, 2000.
  Sung, L. P.; Nadal, M. E.; Stutzman, P. E.; McKnight, M. E.
• Characterization of Coating System Interphases With Phase Imaging AFM.
  Adhesion Society Annual Meeting, 24th. Proceedings. February 2001, Williamsburg, VA, Adhesion Society, Blacksburg, VA, Emerson, J. A., Editor(s), 68-70 pp, 2001.
  Nguyen, T.; Gu, X.; VanLandingham, M. R.; Giraud, M.; Dutruc-Rosset, R.; Ryntz, R.; Nguyen, D.
• Characterization of Heterogeneous Regions in Polymer Systems Using Tapping Mode and Force Mode Atomic Force Microscopy.
  Langmuir, Vol. 16, No. 24, 9448-9459, 2000.
  Raghavan, D.; VanLandingham, M. R.; Gu, X.; Nguyen, T.
• Characterization of Metal-Oxide Nanoparticles: Synthesis and Dispersion in Polymeric Coatings.
  Nanomaterials for Structural Applications. Materials Research Society (MRS) Symposium I. Proceedings. Volume 740. 2003, Materials Research Society, Berndt, C.; Fischer, T. E.; Ovidko, I.; Skandan, G., Editor(s)(s), I5.4.1-I5.4.6 pp, 2003.
  Sung, L. P.; Scierka, S.; Baghai-Anaraki, M.; Ho, D. L.
• Characterization of Polyester Degradation Using Tapping Mode Atomic Force Microscopy.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, American Chemical Society, Washington, DC, 336-337 pp, 2000.
  Gu, X.; Raghavan, D.; Nguyen, T.; VanLandingham, M. R.
• Characterization of Potential Thermal Degradation Products From the Reactions of Aqueous Ethylene Glycol and Propylene Glycol Solutions With Copper Metal.
  Solar Energy Materials, Vol. 16, No. 4, 309-313, 1987.
  Brown, P. W.; Gaulk, K. G.; Rossiter, W. J., Jr.
• Characterization of Potential Thermal Degradation Products From the Reactions of Aqueous Ethylene Glycol and Propylene Glycol Solutions With Copper Metal.
  Solar Energy Materials, Vol. 16, No. 4, 309-313, 1987.
  Brown, P. W.; Gaulk, K. G.; Rossiter, W. J., Jr.
• Characterizing the Appearance and Its Related Microstructure of Metallic-Flaked Coatings.
  Coatings for Plastics Symposium, 3rd International Conference. Proceedings. June 5-7, 2000, Troy, MI, Business News Publishing Co., Troy, MI, 1-6 pp, 2000.
  Sung, L. P.; Nadal, M. E.; McKnight, M. E.
• Chemistry and Structure of Hydration Products. Chapter 2.
  Cement Research Progress. Chapter 2, American Ceramic Society, Westerville, OH, 37-69 p., 1999.
  Stutzman, P. E.
• Chloride Exposed RC-Structures: Chloride Ingress and Lifetime Prediction by the Hetek Model.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.4. November 9-10, 1998, 8-9 pp, 1999.
  Poulsen, E.
• Civil Infrastructure Systems Research: Government Perspective.
  Technical Report MCEER-98-0017;U.S./Japan Joint Seminar on Civil Infrastructure Systems Research. Proceedings. August 28-30, 1997, Honolulu, HI, Multidisciplinary Center for Earthquake Engineeing Research,, Shinozuka, M.; Rose, A., Editor(s)(s), 243-248 pp, 1997.
  Wright, R. N.
• Classical Kinetic Theory Approach to Lattice Boltzmann Simulation.
  International Journal of Modern Physics C, Vol. 12, No. 8, 1169-1178, October 2001.
  Martys, N. S.
• Classification Techniques for Fault Detection and Diagnosis of an Air-Handling Unit.
  CH-99-18-5;ASHRAE Transactions, Vol. 105, No. 1, 1987-1997, 1999.
  House, J. M.; Lee, W. Y.; Shin, D. R.
• Coating Industry Knowledge Base Systems.
  Steel Structures Painting Council (SSPC). Technologies for a Diverse Industry. SSPC 1996 Seminars. Proceedings. SSPC 96-08. November 17-21, 1996, Charlotte, NC, 144-149 pp, 1996.
  Boocock, S. K.; Kaetzel, L. J.
• Code Provisions for High Strength Concrete Strength-Temperature Relationships at Elevated Temperatures.
  Materials and Structures, Vol. 36, No. 256, 91-98, March 2003.
  Phan, L. T.; Carino, N. J.
• Codification of Wind Loads on Buildings Using Bluff Body Aerodynamics and Climatological Data Bases.
  Journal of Wind Engineering and Industrial Aerodynamics, Vol. 69-71, 497-506, 1997.
  Simiu, E.; Stathopoulos, T.
• Collaborative Fire Protection Engineering Based on Software Agents.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 3-8 pp, 2002.
  Rueppel, U.
• Combination of Transient Plane Source and Slug Calorimeter Measurements to Estimate the Thermal Properties of Fire Resistive Materials.
  Journal of Testing and Evaluation, Vol. 3532, No. 3, May 2007.
  Bentz, D. P.
• Comparable Performance Evaluation of HC and HFC Refrigerants in an Optimized System.
  IIR Gustav Lorentzen Conference on Natural Working Fluids, 7th. Proceedings. May 28-31, 2006, Tondheim, Norway, 2006.
  Domanski, P. A.; Yashar, D.
• Comparative Inter-Laboratory Study of Wind Loading on Low Industrial Buildings.
  Technical Memorandum of PWRI 4075;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 39th. Technical Memorandum of PWRI 4075. Proceedings. May 14-16, 2007, Tsukuba, Japan, 409-417 pp, 2007.
  Bienkiewicz, B.; Endo, M.; Main, J. A.; Fritz, W. P.
• Comparative Performance of Two Postal Service Vehicles Operated on Gasoline, Compressed Natural Gas and Propane.
  Winter Annual Meeting, 1974. American Society of Mechanical Engineers (ASME). November 17-22, 1974, New York, NY, 1974.
  Hill, J. E.; Didion, D. A.
• Comparison Between the Affected Populations of Indirect Health Effects After the 1995 Great Hanshin-Awaji Earthquake.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 224-233 pp, 1998.
  Ogawa, K.; Tsuji, I.; Hisamichi, S.; Shiono, K.
• Comparison of an R22 and an R410A Air Conditioner Operating at High Ambient Temperatures.
  R2-1;International Refrigeration and Air Conditioning Conference. Proceedings. July 16-19, 2002, West Lafayette, IN, 2002.
  Payne, W. V.; Domanski, P. A.
• Comparison of Building Code Structural Requirements. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1B; 264 p. September 2005.
  Ghosh, S. K.; Liang, X.
• Comparison of Concrete Rheometers.
  Concrete International, Vol. 25, No. 8, 41-47, August 2003.
  Brower, L. E.; Ferraris, C. F.
• Comparison of Concrete Rheometers: International Tests at LCPC (Nantes, France) in October 2000.
  NISTIR 6819; 156 p. September 2001.
  Ferraris, C. F.; Brower, L. E.; Banfill, P.; Beaupre, D.; Chapdelaine, F.; deLarrard, F.; Domone, P.; Nachbaur, L.; Sedran, T.; Wallevik, O.; Vallevik, J. E.
• Comparison of Concrete Rheometers: International Tests at MB (Cleveland, OH, USA) in May 2003.
  NISTIR 7154; 47 p. September 2004.
  Ferraris, C. F.; Brower, L. E.; Beaupre, D.; Chapdelaine, F.; Domone, P.; Koehler, E. P.; Shen, L.; Sonebi, M.; Struble, L.; Tepke, D.; Wallevik, O.; Wallevik, J. E.
• Comparison of Experimental Measurements of Local Flow Boiling Heat Transfer Coefficients for R11 and R123.
  ASME/JSME Thermal Engineering Proceedings. Vol. 3. 1991, 243-250 pp, 1991.
  Kedzierski, M. A.; Didion, D. A.
• Comparison of Measured and Predicted Tracer Gas Concentrations in a Townhouse.
  NISTIR 7035; 42 p. August 2003.
  Emmerich, S. J.; Nabinger, S. J.; Gupte, A.; Howard-Reed, C.; Wallace, L. A.
• Comparison of Photovoltaic Module Performance Measurements.
  Journal of Solar Energy Engineering (Transactions of the ASME), Vol. 128, No. 2, 152-159, May 2006.
  Fanney, A. H.; Davis, M. W.; Dougherty, B. P.; King, D. L.; Boyson, W. E.; Kratochvil, J. A.
• Comparison of Predicted to Measured Module Performance.
  ES2007-36028; Session: 11-2 Solar Power Testing;Energy Sustainability (ES2007). Session: 11-2 Solar Power Testing. Proceedings. June 27-30, 2007, Long Beach, CA, 1-15 pp, 2007.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Comparison of R245fa Pool Boiling Measurements to R123, and R245fa/Isopentane on a Passively Enhanced, Horizontal Surface.
  International Journal of Transport Phenomena, Vol. 8, No. 4, 331-344, 2006.
  Kedzierski, M. A.
• Comparison of Rating Water-Source Heat Pumps Using ARI Standard 320 and ISO Standard 13256-1.
  NISTIR 6803; 44 p. September 2001.
  Payne, W. V.; Domanski, P. A.
• Comparison of the Seismic Provisions of Model Building Codes and Standards to the 1991 NEHRP Recommended Provisions.
  NIST GCR 95-674; 92 p. May 1995.
  Melvyn Green and Associates, Inc.
• Comparison of the Seismic Provisions of Model Building Codes and Standards to the 1994 NEHRP Recommended Provisions.
  NIST GCR 98-755; ICSSC TR-20; 188 p. August 1998.
  Degenkolb Engineers
• Comparitive Analysis of an Automative Air Conditioning Systems Operating With CO2 and R134a.
  International Journal of Refirgeration, Vol. 25, No. 1, 19-32, 2002.
  Brown, J. S.; Yana-Motta, S. F.; Domanski, P. A.
• Completing Our Panel's Work.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 13-19 pp, 1998.
  Wright, R. N.
• Compositional Analysis of Beneficiated Fly Ashes.
  NISITR 5598; 23 p. May 1995.
  Stutzman, P. E.; Centeno, R. L.
• Compositional Analysis of NIST Reference Material Clinker 8486.
  Accuracy in Powder Diffraction III. Proceedings. Poster #2. April 22-25, 2001, Gaithersburg, MD, 2001 AND Cement Microscopy, 22nd International Conference. Proceedings. April 29-May 4, 2000, Montreal, Canada, 22-38 pp, 2000, 2001.
  Stutzman, P. E.; Leigh, S. D.
• Compositional Analysis of NIST Reference Material Clinker 8486.
  Accuracy in Powder Diffraction III. Proceedings. Poster #2. April 22-25, 2001, Gaithersburg, MD, 2001 AND Cement Microscopy, 22nd International Conference. Proceedings. April 29-May 4, 2000, Montreal, Canada, 22-38 pp, 2000, 2001.
  Stutzman, P. E.; Leigh, S. D.
• Computational Materials Science on the Internet.
  Concrete International, 26-27, December 1997.
  Garboczi, E. J.; Bentz, D. P.
• Computation of Linear Elastic Properties from Microtomographic Images: Methodology and Match to Theory and Experiment.
  Journal of Geophysics, Vol. 67, No. 5, 1396-1405, September/October 2002.
  Arns, C. H.; Knackstedt, M. A.; Pinczewski, W. V; Garboczi, E. J.
• Computation of the Linear Elastic Properties of Random Porous Materials With a Wide Variety of Microstructure.
  Mathematical, Physical and Engineering Sciences Royal Society of London, Series A. Vol. 458, No. 2021. Proceedings. 2002, 1033-1054 pp, 2002.
  Roberts, A. P.; Garboczi, E. J.
• Computer Analysis of the Moisture Performance of Roof Constructions in the U.S. DOE Moisture Control Handbook.
  NISTIR 5919; 56 p. December 1996.
  Tsongas, G. A.; Thornton, B. A.; Burch, D. M.; Walton, G. N.
• Computer Analysis of Wall Constructions in the Moisture Control Handbook.
  NISTIR 5627; 70 p. May 1995.
  Burch, D. M.; Saunders, C. A.
• Computer-Based Monitoring for Decision Support Systems and Disaster Preparedness in Buildings.
  International Multi-Conference on Engineering and Technological Innovation (IMETI 2008). Proceedings. Communications Systems, Technologies and Applications II (CCCT). June 29-July 2, 2008, Orlando, FL, 1-6 pp, 2008.
  Vinh, A.
• Computer Integrated Knowledge System (CIKS) for Construction Materials, Components, and Systems: Proposed Framework.
  NISTIR 6071; 50 p. September 1997.
  Kurihara, T. Y.; Kaetzel, L. J.
• Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop.
  NISTIR 6401; 102 p. December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 1999.
  Kaetzel, L. J.
• Computer Integrated Knowledge Systems: Proposed Framework.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 58-63 pp, 1999.
  Kurihara, T. Y.
• Computerized Integrated Knowledge Based System for High-Performance Concrete: An Overview.
  NISTIR 5947; 43 p. February 1997.
  Clifton, J. R.; Bentz, D. P.; Kaetzel, L. J.
• Computerized Integrated Knowledge Base System for High-Performance Concrete: An Overview.
  Challenges for Concrete in the Next Millennium, 13th FIP Congress Proceedings. Volume 1. May 23-29, 1998, Amsterdam, Netherlands, A.A. Balkema, Rotterdam, Stoelhorst, D.; denBoer, G. P. L., Editor(s)(s), 127-128 pp, 1998.
  Clifton, J. R.
• Computerizing Concrete Technology Knowledge.
  Concrete International, 74-76, December 1999.
  Frohnsdorff, G. J. C.; Kaetzel, L. J.
• Computer Modeling of the Replacement of "Coarse" Cement Particles by Inert Fillers in Low W/C Ratio Concretes: Hydration and Strength.
  Cement and Concrete Research, Vol. 31, No. 3, 503-506, 2001.
  Bentz, D. P.; Conway, J. T.
• Computer Modeling of the Vapor Compression Cycle With Constant Flow Area Expansion Device. Final Report.
  NBS BSS 155; May 1983.
  Domanski, P. A.; Didion, D. A.
• Computer Modelling of Interfacial Transition Zone: Microstructure and Properties.
  Engineering and Transport Properties of the Interfacial Transition Zone in Cementitious Composites. RILEM Report No. 20. Proceedings. Part 5. Chapter 20. 1999, Cedex, France, RILEM Publications s.a.r.l., Cedex, France, Alexander, M. G.; Arliguie, G.; Ballivy, G.; Bentur, A., Editor(s)(s), 349-385 pp, 1999.
  Bentz, D. P.; Garboczi, E. J.
• Computer Model to Predict the Surface Temperature and Time-of-Wetness of Concrete Pavements and Bridge Decks.
  NISTIR 6551; 24 p. August 2000.
  Bentz, D. P.
• Computer Program to Facilitate Performance Assessment of Underground Low-Level Waste Concrete Vaults.
  Materials Research Society. Materials Research Society Symposium Proceedings Volume 412. 1996, 491-498 pp, 1996.
  Snyder, K. A.; Clifton, J. R.; Pommersheim, J. M.
• Computer Representations of Design Standards and Building Codes: U.S. Perspective.
  International Journal of Construction Information Technology, Vol. 3, No. 1, 13-34, Summer 1995.
  Fenves, S. J.; Garrett, J. H., Jr.; Kiliccote, H.; Law, K. H.; Reed, K. A.
• Computer Simulation and Percolation Theory Applied to Concrete.
  Annual Reviews of Computational Physics. Volume VII, World Scientific Publishing Co., River Edge, NJ, Stauffer, D., Editor, 85-123 p., 1999.
  Garboczi, E. J.; Bentz, D. P.
• Computer Simulation of Interfacial Zone Microstructure and Its Effect on the Properties of Cement-Based Composites.
  American Ceramic Society. Materials Science of Concrete. Volume 6. 1995, Westerville, OH, Skalny, J. P.; Mindell, S., Editor(s)(s), 155-199 pp, 1995.
  Bentz, D. P.; Schlangen, E.; Garboczi, E. J.
• Computer Simulations of Airflow and Radon Transport in Four Large Buildings.
  NISTIR 5611; 46 p. April 1995.
  Fang, J. B.; Persily, A. K.
• Computer Simulations of Binder Removal From 2-D and 3-D Model Particulate Bodies.
  Journal of the American Ceramic Society, Vol. 79, No. 5, 1377-1388, 1996.
  Lewis, J. A.; Galler, M. A.; Bentz, D. P.
• Computer Technologies in Construction Robots Control.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 501-504 pp, 2002.
  Bock, T.; Parshin, D.; Neudorf, R.; Bulgakow, A.
• Concept of the Robotoid Manager With AR.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 537-541 pp, 2002.
  Bock, T.; Ashida, S.
• Concrete Degradation Modeling in the Evaluation of Entombment as a Decommission Option.
  Nuclear and Hazardous Waste Management International Conference: Spectrum 2002. Proceedings. August 4-8, 2002, Reno, NV, 2002.
  Snyder, K. A.; Philip, J.
• Concrete Fire Test Programs in Taiwan.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B1. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 55-58 pp, 1997.
  Lin, T. D.; Chou, S.
• Concrete Materials Database.
  Concrete International, Vol. 22, No. 12, 28-33, December 2000.
  Oland, C. B.; Ferraris, C. F.
• Concrete Mixing Methods and Concrete Mixers: State of the Art.
  Journal of Research of the National Institute of Standards and Technology, Vol. 106, No. 2, 391-399, 2001.
  Ferraris, C. F.
• Concrete Mixture Optimization Using Statistical Mixture Design Methods.
  High Performance Concrete International Symposium. Proceedings. PCI/FHWA. October 20-22, 1997, New Orleans, LA, 230-244 pp, 1997.
  Simon, M. J.; Lagergren, E. S.; Snyder, K. A.
• Condensadores de Tubo Con Aletas Optimizacion Mediante Sistema Inteligente. (IN SPANISH) [Optimization of Finned-Tube Condensers Using an Intelligent System.]
  International Journal of Refrigeration, Vol. 30, No. 3, May 2007.
  Domanski, P. A.; Yashar, D. A.
• Condition Assessment of Concrete Nuclear Structures Considered for Entombment.
  NISTIR 7026; 43 p. July 2003.
  Snyder, K. A.
• Cone Calorimeter Combustion and Gasification Studies of Polymer Layered Silicate Nanocomposites.
  Chemistry of Materials, Vol. 14, No. 2, 881-887, February 2002.
  Zanetti, M.; Kashiwagi, T.; Falqui, L.; Camino, G.
• Connecting Buildings to Public Safety Networks.
  PubID: 901029;International Multi-Conference on Engineering and Technological Innovation (IMETI 2009). Proceedings. Volume 3. July 10-July 13, 2009, Orlando, FL, 199-203 pp, 2009.
  Vinh, A.
• Connection Model for the Seismic Analysis of Welded Steel Moment Frames.
  Engineering Structures, Vol. 20, No. 4/6, 390-397, April/June 1998.
  Gross, J. L.
• Connections of Fiber-Reinforced Polymer (FRP) Structural Members: A Review of the State of the Art.
  NISTIR 6532; 59 p. August 2000.
  Duthinh, D.
• Consideration on Flutter Characteristics of Super Long-Span Bridges.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 415-423 pp, 1998.
  Sato, H.; Ogihara, K.; Ogi, K.
• Constructed Civil Infrastructure Systems R&D: A European Perspective. Appendix A: United Kingdom. Appendix B: Sweden.
  CERF Report 94-5010; 29 p. 1994.
  Wright, R. N.
• Construction and Building: Federal Research and Development in Support of the U.S. Construction Industry.
  ; 32 p. 1995.
  Wright, R. N.; Rosenfeld, A. H.; Fowell, A. J.
• Construction and Building. Interagency Program for Technical Advancement in Construction and Building. Report of the Subcommittee on Construction and Building Committee on Technology, National Science and Technology Council
  ; 36 p. 1999.
  Snell, J. E.; Rosenfeld, A. H.; Fowell, A. J.; Wright, R. N.
• Construction Metrology Standards in Orbiting Facility Construction, Maintenance, and Operation.
  Robotics 2000. ASCE Conference on Robotics for Challenging Environments. February 28-March 2, 2000, Albuquerque, NM, 2000.
  Latimer, D. T., IV
• Construction Supernetwork.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 64-64 pp, 1999.
  Sparkman, A.
• Construction Zone Generation Mechanisms and Applications.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 293-298 pp, 2002.
  Akbas, R.; Fischer, M.
• CONTAM88 Building Input Files for Multi-Zone Airflow and Contaminant Dispersal Modeling.
  NISTIR 5440; 54 p. June 1994.
  Fang, J. B.; Persily, A. K.
• CONTAM93: A Multizone Airflow and Contaminant Dispersal Model With a Graphic User Interface.
  Air Infiltration Review, Vol. 16, No. 1, 6-8, December 1994.
  Walton, G. N.; Emmerich, S. J.
• CONTAM93: User Manual.
  NISTIR 5385; 77 p. March 1994.
  Walton, G. N.
• CONTAM94: A Multizone Airflow and Contaminant Dispersal Model With a Graphic User Interface.
  Performance Simulation Association. Building Simulation '95. 4th Conference. Proceedings. August 14-16, 1995, Madison, WI, 1-6 pp, 1995.
  Walton, G. N.
• CONTAM96: User Manual.
  NISTIR 6056; 77 p. September 1997.
  Walton, G. N.
• CONTAMW 1.0 User Manual: Multizone Airflow and Contaminant Transport Analysis Software.
  NISTIR 6476; 137 p. June 2000.
  Dols, W. S.; Walton, G. N.; Denton, K. R.
• CONTAMW 2.0 User Manual. Multizone Airflow and Contaminant Transport Analysis Software.
  NISTIR 6921; 161 p. November 2002.
  Dols, W. S.; Walton, G. N.
• CONTAMW 2.1 Supplemental User Guide and Program Documentation.
  NISTIR 7049; 101 p. October 23, 2003.
  Walton, G. N.; Dols, W. S.
• Continuous Measurements of Air Change Rates in an Occupied House for 1 Year: The Effect of Temperature, Wind, Fans and Windows.
  Journal of Exposure Analysis and Environmental Epidemiology, Vol. 12, No. 4, 296-306, July 2002.
  Wallace, L. A.; Emmerich, S. J.; Howard-Reed, C.
• Contributions of NIST/NBS Researchers to the Crystallography of Construction Materials.
  Journal of Research of the National Institute of Standards and Technology, Vol. 106, No. 6, 1051-1061, November/December 2001.
  Stutzman, P. E.
• Control of Exits From a Safe Region: A Stochastic Melnikov Approach.
  Control of Oscillations and Chaos (COC'97). International Conference, First (1st). Volume 3 of 3. 97TH8329. Proceedings. Institute of Electrical and Electronics Engineers (IEEE). August 27-29, 1997, St. Petersburg, Russia, Chernousko, F. L.; Fradkov, A. L., Editor(s)(s), 569-572 pp, 1997.
  Franaszek, M.; Frey, M. R. R.; Simiu, E.
• Control of Hysteretic Structures Using Hoo Algorithm and Stochastic Linearization Techniques.
  U.S. National Conference on Earthquake Engineering, 7th Proceedings. (7NCEE). Theme: Urban Earthquake Risk. Earthquake Engineering Research Institute (EERI). July 21-25, 2002, Boston, MA, 1-10 pp, 2002.
  Sadek, F.; Ftima, M. B.; El-Borgi, S.; McCormick, J.; Riley, M. A.
• Control Stability of a Heat-Flow-Meter Apparatus.
  American Society for Testing and Materials. Measurement Errors and Methods of Calibration of Heat-Flow-Meter Apparatus. ASTM C-16 Workshop. April 9, 1994, Williamsburg, VA, 1994.Journal of Thermal Insulation and Building Environments, Vol. 18, 116-127, October 1994.
  Zarr, R. R.
• Control System That Prevents Air From Entering an Air-Handling Unit Through the Exhaust Air Damper.
  Optimum Ventilation and Air Flow Controls in Buildings. AIVC 17th Annual Conference. Proceedings. Volume 2. September 1996, Gothenberg, Sweden, 562-569 pp, 1996.
  Seem, J. E.; House, J. M.
• Convective Boiling and Condensation Heat Transfer With a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, R134a/R600a.
  NISTIR 5905; 95 p. January 1997.New Approach Toward Low-Temperature Thermal Engineering Without Fluorocarbon Refrigerants, 45th. Oji International Seminar. Proceedings. September 16-19, 1997, Tomakomai City, Japan, 223-232 pp, 1998.Thermal Science and Engineering, Vol. 6, No. 1, 113-1201, 1998.
  Kedzierski, M. A.; Kim, M. S.
• Convective Boiling and Condensation Heat Transfer With a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, R134a/R600a.
  NISTIR 5905; 95 p. January 1997.New Approach Toward Low-Temperature Thermal Engineering Without Fluorocarbon Refrigerants, 45th. Oji International Seminar. Proceedings. September 16-19, 1997, Tomakomai City, Japan, 223-232 pp, 1998.Thermal Science and Engineering, Vol. 6, No. 1, 113-1201, 1998.
  Kedzierski, M. A.; Kim, M. S.
• Cooling Mode Fault Detection and Diagnosis Method for a Residential Heat Pump.
  NIST SP 1087; NIST Special Publication 1087; 98 p. October 2008.
  Kim, M. S.; Yoon, S. H.; Payne, W. V.; Domanski, P. A.
• Cost Analysis of Inadequate Interoperability in the U.S. Capital Facilities Industry.
  NIST GCR 04-867; 194 p. August 2004.
  Gallaher, M. P.; O'Connor, A. C.; Dettbarn, J. L., Jr.; Gilday, L. T.
• Cost-Effective Compliance With Life Safety Codes.
  Fire Technology, Vol. 32, No. 4, 291-296, November/December 1996.
  Weber, S. F.; Lippiatt, B. C.
• Cost-Effective Ground Improvement for Liquefaction Remediation Near Existing Lifelines.
  U.S./Japan Cooperative Program in Natural Resources. Panel on Wind and Seismic Effects. Joint Meeting, 27th. Proceedings. May 16-19, 1995, Tsukuma, Japan, 115-123 pp, 1995.
  Andrus, R. D.; Chung, R. M.
• Cost-Effective Positioning Solution for Asphalt Rollers Based on Low-Cost DGPS Receivers.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 403-408 pp, 2002.
  Jurasz, J.; Kley, K. L.
• Cost-Effective Responses to Terrorist Risks in Constructed Facilities.
  NISTIR 7073; 146 p. March 2004.
  Chapman, R. E.; Leng, C. J.
• Cost Sharing as an Incentive to Attain the Objectives of Shoreline Protection. Final Report.
  NBSIR 73-294; December 1973.
  Marshall, H. E.
• Cost Sharing as an Incentive to Attain the Objectives of Shoreline Protection. Final Report.
  NBSIR 73-294; December 1973.
  Marshall, H. E.
• Creating a Standard Corrosion Service Life Prediction Method.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.8. November 9-10, 1998, 14-15 pp, 1999.
  Miltenberger, M. A.
• Crisis-Induced Intermittency and Melnikov Scale Factor.
  Physics Letters A, Vol. 205, 137-142, September 11, 1995.
  Franaszek, M.; Simiu, E.
• Criteria of Taking Decisions at Technical Operation of Building Machinery in Conditions of the Construction Plant.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 103-107 pp, 2002.
  Bulgakow, A.; Drownikow, A.; Perschin, V.
• Critical Gaps in Durability Data for FRP Composites in Civil Infrastructure.
  Bridging the Centuries With SAMPE's Materials and Processes Technology. Science of Advanced Materials and Process Engineering Series. Society for the Advancement of Materials and Process Engineering (SAMPE), 45th International SAMPE Symposium and Exhibition. Volume 45. Proceedings. May 21-25, 2000, Long Beach, CA, 549-563 pp, 2000.
  Karbhari, V. M.; Chin, J. W.; Reynaud, D.
• Critical Properties and Phase Separation in Lattice Boltzmann Fluid Mixtures.
  Physical Review E, Vol. 63, 1-18, 2001.
  Martys, N. S.; Douglas, J. F.
• Cumulative Seismic Damage of Circular Bridge Columns: Benchmark and Low-Cycle Fatigue Tests.
  ACI Structural Journal, Vol. 96, No. 4, 633-641, July/August 1999.
  El-Bahy, A.; Kunnath, S. K.; Stone, W. C.; Taylor, A. W.
• Cumulative Seismic Damage of Circular Bridge Columns: Variable Amplitude Tests.
  ACI Structural Journal, Vol. 96, No. 5, 711-719, September/October 1999.
  El-Bahy, A.; Kunnath, S. K.; Stone, W. C.; Taylor, A. W.
• Cumulative Seismic Damage of Reinforced Concrete Bridge Piers.
  NISTIR 6075; 132 p. October 1997.
  Kunnath, S. K.; El-Bahy, A.; Taylor, A. W.; Stone, W. C.
• Curing, Hydration, and Microstructure of Cement Paste.
  ACI Materials Journal, Vol. 103, No. 5, 348-356, September/October 2006.
  Bentz, D. P.; Stutzman, P. E.
• Curing of High Performance Concrete: Annotated Bibliography.
  NIST GCR 97-715; 161 p. May 1997.
  Meeks, K. W.; Sarkani, S.
• Curing of High-Performance Concrete for Strength: What Is Sufficient?
  Repair, Rehabilitation, and Maintenance of Concrete Structures, and Innovations in Design and Construction, 4th International Conference. Proceedings. American Concrete Institute (ACI). ACI SP 193. September 2000, Seoul, Korea, American Concrete Institute, Farmington Hills, MI, Malhotra, V. M., Editor(s), 1-36 pp, 2000.
  Carino, N. J.; Meeks, K. W.
• Curing of High-Performance Concrete: Phase 1 Study.
  NISTIR 6505; 39 p. April 2001.
  Carino, N. J.; Meeks, K. W.
• Curing of High-Performance Concrete: Report of the State-of-the Art.
  NISTIR 6295; 199 p. March 1999.
  Meeks, K. W.; Carino, N. J.
• Curing With Shrinkage-Reducing Admixtures Beyond Drying Shrinkage Reduction.
  Concrete International, Vol. 27, No. 10, 55-60, October 2005.
  Bentz, D. P.
• CYCLE_D: NIST Vapor Compression Cycle Design Program Version 3.0 Users' Guide.
  NIST Standard Reference Database 49; 49 p. March 2003.
  Domanski, P. A.; Didion, D. A.; Chi, J.
• CYCLE D: NIST Vapor Compression Cycle Design Program. Version 4.0. Users' Guide.
  NIST Standard Reference Database 49; 42 p. May 2009.
  Brown, J. S.; Domanski, P. A.; Lemmon, E. W.
• CYCLE_D Version 4.0: Theoretical Vapor Compression Cycle Design Program.
  Paper IIR-204; PaperID 913;Thermophysical Properties and Transfer Processes of Refrigerants, 3rd Conference. Proceedings. (2009 IIR Commission B1 Conference)). June 23-26, 2009, Boulder, CO, 1-8 pp, 2009.
  Brown, J. S.; Domanski, P. A.; Lemmon, E. W.
• Cyclic Testing of Steel Moment Connections Rehabilitated With RBS or Welded Haunch.
  Journal of Structural Engineering, Vol. 126, No. 1, 57-68, January 2000.
  Uang, C. M.; Yu, Q. S.; Noel, S.; Gross, J. L.
• Cyclic Testing of Steel Moment Connections Rehabilitated With RBS or Welded Haunch.
  Journal of Structural Engineering, Vol. 126, No. 1, 57-68, January 2000.
  Uang, C. M.; Yu, Q. S.; Noel, S.; Gross, J. L.

D

• Damage and Failure Modes of Structural Steel Components. Appendices A-G. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-3C; 258 p. September 2005.
  Banovic, S. W.; Foecke, T.
• Damage and Failure Modes of Structural Steel Components. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-3C; 336 p. September 2005.
  Banovic, S. W.; Foecke, T.
• Damper Control System for Preventing Reverse Airflow Through the Exhaust Air Damper of Variable-Air-Volume Air-Handling Units.
  HVAC&R Research, Vol. 6, No. 2, 135-148, April 2000.
  Seem, J. E.; House, J. M.; Kelly, G. E.; Klaassen, C. J.
• Database-Assisted Design and Wind Directionality Effects.
  Bluff Body Aerodynamics and Applications, 4th International Colloquium. Volume of Abstracts. Proceedings. Organized by Ruhr-University Bochum. September 11-14, 2000, 213-216 pp, 2000.
  Rigato, A.; Chang, P. C.; Simiu, E.
• Database-Assisted Design, Standardization, and Wind Direction Effects.
  Journal of Structural Engineering, Vol. 127, No. 8, 853-860, August 2001.
  Rigato, A.; Chang, P.; Simiu, E.
• Database Synchronization Technology for Multi-Project Schedule Coordination.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 109-116 pp, 2002.
  Choo, H. J.; Tommelein, I. D.
• Database Tools for Modeling Emissions and Control of Air Pollutants From Consumer Products, Cooking, and Combustion.
  NISTIR 7364; 69 p. November 2006.
  Howard-Reed, C.; Polidoro, B.
• Data Exchange Standards for Construction Automation.
  NISTIR 5856; May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. Chapter One: Topical Lectures. Paper 1.6. March 20-31, 1995, 43-49 pp, 1995.
  Reed, K. A.
• Data Interpretation From Leuze Rotoscan Sensor for Robot Localisation and Environment Mapping.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 343-348 pp, 2002.
  Seward, D. W.; Quayle, S. D.; Zied, K.; Pace, C.
• De Bolder: An Unusual Example of Off-Site Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 143-148 pp, 2002.
  Maas, G.; vanEekelen, B.
• December 2003 Public Update on the Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST SP 1000-4; 36 p. December 2003.
  Shyam-Sunder, S.
• December 9, 2002, Progress Report on the NIST Building and Fire Investigation Into the World Trade Center Disaster.
  NISTIR 6942; NIST SP 1000-2; 17 p. December 2002.
  Shyam-Sunder, S.
• De Facto Microzonation Through the Use of Soils Factors in Design Triggers.
  International Conference on Seismic Zonation, 5th. Proceedings. October 17-19, 1995, Nice, France, Quest Editions, France, 510-517 pp, 1995.
  Todd, D. R.; Harris, J. R.
• Degradation of Powder Epoxy Coated Panels Immersed in a Saturated Calcium Hydroxide Solution Containing Sodium Chloride. Final Report. August 1992-July 1994.
  FHWA-RD-94-174; 44 p. October 1995.
  Martin, J. W.; Nguyen, T.; Alsheh, D.; Lechner, J. A.; Embree, E. J.; Byrd, W. E.; Seiler, J. F., Jr.
• Degraded Aqueous Glycoil Solutions: pH Values and the Effects of Common Ions on Suppression pH Decreases.
  Solar Energy Materials, Vol. 12, No. 1, 77-86, 1985.
  Clifton, J. R.; Rossiter, W. J., Jr.; Brown, P. W.
• De la Pate de Ciment au Beton: Modlisation et Mesures Exprimentales des Proprietes Rhologiques. [Cement Paste to the Concrete Modisation and Measure Experimental of the Properties Rheology.]
  36e Colloque Annuel du Groupe Franais de Rhologie; Rhologie, Genie Civil et Environment. Proceedings. October 10-12, 2001, Marne l Vallee, 226-230 pp, 2001.
  Ferraris, C. F.; Martys, N. S.
• Delineation of Densified Sand at Treasure Island by SASW Testing.
  Geotechnical Site Characterization. Site Characterization - ISC'98, 1st International Conference. Volume 1. April 19-22, 1998, Atlanta, GA, A.A. Balkema, Rotterdam, Netherlands, Robertson, P. K.; Mayne, P. W., Editor(s)(s), 459-464 pp, 1998.
  Andrus, R. D.; Chung, R. M.; Stokoe, K. H., II; Bay, J. A.
• Dense Strong Motion Instrument Array in Sendai.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 484-491 pp, 1998.
  Okawa, I.; Kashima, T.; Koyama, S.
• DEPAF: A Computer Model for Design and Performance Analysis of Furnaces.
  ASME 77-HT-11;AIChE-ASME Heat Transfer Conference. American Society of Mechanical Engineers. August 15-17, 1977, Salt Lake City, UT, 1977.
  Chi, J.
• Department of Energy Air-Conditioner/Heat Pump Test Procedure Update.
  Heat Pumps in Cold Climates, Third (3rd) International Conference. Proceedings. Caneta Research, Inc. August 11-12, 1997, Nova Scotia, Canada, Caneta Research, Inc., Ontario, Canada, 493-508 pp, 1997.
  Dougherty, B. P.
• Dependence of the Glass Transition Temperature of Polymer Films on Interfacial Energy and Thickness.
  Macromolecules, Vol. 34, No. 16, 5624-5634, 2001.
  Fryer, D. S.; Peters, R. D.; Kim, E. J.; Tomaszewski, J. E.; dePablo, J. J.; Nealey, P. F.; White, C. C.; Wu, W.
• Deposition of Oil Spilled From a Russian Tanker on Coasts.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 492-501 pp, 1998.
  Kato, F.; Sato, S.
• Deposition Rates of Fine and Coarse Particles in Residential Buildings: Literature Review and Measurements in an Occupied Townhouse.
  NISTIR 7068; 29 p. October 2003.
  Howard-Reed, C.; Wallace, L.; Emmerich, S. J.
• Design and Construction of Structural Systems. Appendices A-G. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1A; 386 p. September 2005.
  Fanella, D. A.; Derecho, A. T.; Ghosh, S. K.
• Design and Construction of Structural Systems. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1A; 159 p. September 2005.
  Fanella, D. A.; Derecho, A. T.; Ghosh, S. K.
• Design and Machining of Copper Specimens With Micro Holes for Accurate Heat Transfer Measurements.
  Experimental Heat Transfer, Vol. 6, 329-344, 1993.
  Kedzierski, M. A.; Worthington, J. L., III
• Design Concepts for a New Guarded Hot Plate Apparatus for Use Over an Extended Temperature Range.
  Insulation Materials: Testing and Applications, 4th Volume. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 98-115 pp, 2002.
  Flynn, D. R.; Zarr, R. R.; Hahn, M. H.; Healy, W. M.
• Design Considerations for the Use of Fiber Reinforced Polymeric Composites in the Rehabilitation of Concrete Structures.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/59-72 pp, 1999.
  Karbhari, V. M.; Seible, F.
• Design Guidelines for the Seismic Modification of Welded Steel Moment Frame Buildings.
  NIST SP 931; PB98-150238; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 201-210 pp, 1998.
  Gross, J. L.
• Design Gust Wind Speeds in the United States.
  Journal of Structural Engineering, 1077-1080, September 1999.
  Simiu, E.; Filliben, J. J.
• Design, Measurements and Performance Predictions for a Micromolded Refrigerant Expansion Device.
  NISTIR 7327; 137 p. April 2006.
  Yashar, D. A.
• Design of a Steady-State Detector for Fault Detection and Diagnosis of a Residential Air Conditioner.
  International Journal of Refrigeration, Vol. 31, No. 5, 790-799, August 2008.
  Kim, M.; Yoon, S. H.; Domanski, P. A.; Payne, W. V.
• Design of Extended Range EVA PLSS Systems: Lessons From Terrestrial Exploration Missions.
  Space Manufacturing, 12th Conference. Proceedings. Space Studies Institute. May 8-11, 1997, Princeton, NJ, 1997.
  Stone, W. C.
• Detailed Computer Analysis of the Moisture Performance of Roof Constructions in the U.S. DOE Moisture Control Handbook.
  Challenges of the 21st Century. Roofing Technology, 4th International Symposium. Proceedings. First (1st) Edition. U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, National Roofing Contractors Association, Rosemont, IL, 401-416 pp, 1997.
  Tsongas, G. A.; Thornton, B. A.; Burch, D. M.; Walton, G. N.
• Detection of Moisture Accumulation in Wall Assemblies Using Ultra-Wideband Radio Signals.
  Performance of Exterior Envelopes of Whole Buildings. International Conference, 9th. Proceedings December 5-10, 2004, Clearwater Beach, FL, 2004.
  Healy, W. M.; vanDoorn, E.
• Deterioration of Iowa Highway Concrete Pavements: A Petrographic Study.
  NISTIR 6399; 84 p. December 1999.
  Stutzman, P. E.
• Determination of Acidic Degradation Products in Aqueous Ethylene Glycol and Propylnene Glycol Solutions Using Ion Chromatography.
  Solar Energy Materials, Vol. 9, 267-279, 1983.
  Rossiter, W. J., Jr.; Brown, P. W.; Godette, M.
• Determination of the Ultimate Capacity of Elastomeric Bearings Under Axial Loading.
  NISTIR 6121; 150 p. February 1998.
  Bradley, G. L.; Chang, P. C.; Taylor, A. W.
• Determining the Uncertainty of X-Ray Absorption Measurements.
  Journal of Research of the National Institute of Standards and Technolgoy, Vol. 109, No. 5, 479-496, September/October 2004.
  Wojcik, G. S.
• Devastating Network in Miura Peninsula Japan.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 344-349 pp, 1998.
  Watabe, M.; Hirokawa, S.
• Developing a Construction Integrated Management System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 27-33 pp, 2002.
  Shiau, Y. C.; Wang, M. T.; Tsai, T. P.; Wang, W. C.
• Developing Application Protocols (APs) Using the Architecture and Methods of STEP (STandard for the Exchange of Product data). Fundamentals of the STEP Methodology.
  NISTIR 5972; 77 p. January 1997.
  Danner, W. F.
• Developmental Computer-Based Version of ASCE 7-95 Standard Provisions for Wind Loads.
  NIST TN 1415; 55 p. November 1995.
  Schechter, M. M.; Schechter, E.; Simiu, E.
• Development and Application of an Indoor Air Quality Commissioning Program in a New Office Building.
  American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Engineering Indoor Environments. IAQ'94 Conference. October 30-November 2, 1994, St. Louis, MO, 23-33 pp, 1994.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Development and Application of an Indoor Air Quality Commissioning Program in a New Office Building.
  American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Engineering Indoor Environments. IAQ'94 Conference. October 30-November 2, 1994, St. Louis, MO, 23-33 pp, 1994.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Development and Application of a Quality System Standard for Construction Materials Testing Laboratories.
  American Society for Testing and Materials. Laboratory Operation and Accreditation, 3rd Symposium. Proceedings. December 9, 1993, Dallas/Fort Worth Airport, TX, 1993.Journal of Testing and Evaluation, Vol. 24, No. 1, 49-55, January 1996.
  Spellerberg, P. A.; Trimm, W. L.; Pielert, J. H.
• Development and Application of Automated Delivery System for Finishing Building Materials.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 235-240 pp, 2002.
  Atsuhiro, D.; Koji, H.; Tomoya, K.; Takashi, S.
• Development and Demonstration of a Method to Evaluate Bio-Sampling Strategies Using Building Simulation and Sample Planning Software.
  NIST TN 1636; NIST Technical Note 1636; 55 p. June 2009.
  Dols, W. S.; Matzke, B. D.; Sego, L. H.; Morrow, J. B.; Nuffer, L. L.; Pulsipher, B. A.; Persily, A. K.
• Development and Operation of Large Centrifuge at PWRI.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 158-166 pp, 1998.
  Matsuo, O.; Tsutsumi, T.; Okamura, M.; Sasaki, T.; Nishi, K.
• Development of a Method for Measuring Water-Stripping Resistance of Asphalt/Siliceous Aggregate Mixtures.
  NISTIR 5865; 49 p. July 1996.
  Nguyen, T.; Byrd, W. E.; Bentz, D. P.; Seiler, J. F., Jr.
• Development of an Analysis of Structural Steel Fracture and Development of Technical Solutions.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 196-200 pp, 1998.
  Yamanouchi, H.; Mukai, A.; Hasegawa, T.
• Development of an Information Model to Enhance Integration and Coordination in the Construction Projects.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 123-128 pp, 2002.
  Caballero, A. A.; Ahmed, S. M.; Azhar, S.; Barcala, M.
• Development of an Integrated Cost Estimation and Cost Control System for Construction Projects.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 129-134 pp, 2002.
  Azhar, S.; Ahmed, S. M.; Caballero, A. A.
• Development of a NIST Standard Reference Database for Thermal Conductivity of Building Materials.
  Thermal Conductivity 25/Thermal Expansion 13. Proceedings. June 13-16, 1999, Technomic Publishing Co., Inc., 2000.
  Zarr, R. R.; Dalton, G. R.; Fioravante, S. M.
• Development of an Optical Fiber-Based Moisture Sensor for Building Envelopes.
  Document AIC-PROC-24-2--3;Ventilation, Humidity Control and Energy Proceedings. Air Infiltration and Ventilation Centre (AIVC) Conference and Building Environment and Thermal Envelope Council (BETEC) Conference, 24th. Proceedings. (International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems Program. Annex V: Air Infiltration and Ventilation Centre.) October 14, 2003, Washington, DC, 277-282 pp, 2003.
  Healy, W. M.; Luo, S.; Evans, M.; Sucheta, A.; Liu, Y.
• Development of a Robotic Structural Steel Placement System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 263-268 pp, 2002.
  Lytle, A. M.; Saidi, K. S.; Stone, W. C.
• Development of a Test Method for Leaching of Lead From Lead-Based Paints Through Encapsulants.
  NISTIR 5783; 39 p. February 1996.
  Nguyen, T.; McKnight, M. E.; Byrd, W. E.
• Development of Electronic Acquisition Model for Project Scheduling (e-AMPS) Using Java-XML.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 41-46 pp, 2002.
  Lin, W. Y.
• Development of IAQ Model Input Databases: Volatile Organic Compound Source Emission Rates.
  Development of IAQ Model Input Databases: Volatile Organic Compound Source Emission Rates. Air and Waste Management Association Conference. Proceedings. July 21-23, 2003, Research Triangle Park, NC, 1-14 pp, 2003.
  Howard-Reed, C.; Polidoro, B.; Dols, W. S.
• Development of New High Bridge Piers Containing Spiral Reinforcement.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 459-474 pp, 1998.
  Michio, O.; Jiro, F.; Takuya, A.; Moriyuki, O.; Yasuyuki, K.
• Development of Performance-Based Building Code in Japan: Framework of Seismic and Structural Provisions.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 260-271 pp, 1998.
  Hiraishi, H.; Midorikawa, M.; Teshigawara, M.; Gojo, W.
• Development of Procedures to Enhance the Performance of Rehabilitated URM Buildings.
  NIST GCR 97-724-1; 101 p. August 1997.
  Lizundia, B.; Holmes, W. T.; Longstreth, M.; Kren, A.; Abrams, D. P.
• Development of Test Guidelines for Passive Energy Dissipation Devices.
  ISSD 0386-5878;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting, 31st. Technical Memorandum of PWRI 3653. Proceedings. May 11-14, 1999, Tsukuba, Japan, 461-468 pp, 1999.
  Riley, M. A.; Sadek, F.
• Development of the Disaster Information System (DIS/Earthquakes).
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 286-299 pp, 1998.
  Okayama, K.; Kiriyama, T.; Yabuuchi, S.
• Development of the Reference Model for a Residential Heat Pump System for Cooling Mode Fault Detection and Diagnosis.
  International Journal of Refrigeration,
  Kim, M.; Yoon, S. H.; Payne, W. V.; Domanski, P. A.
• Development of Thermal Insulation Standard Reference Materials Using "Good" Experimental Design.
  Thermal Conductivity, 24th and Thermal Expansion, 12th Joint Conferences. Proceedings. October 26-29, 1997, Pittsburgh, PA, Technomic Publishing Co., Inc., Lancaster, PA, Gaal, P. S.; Apostolescu, D. E.; Hurst, E. P., Editor(s)(s), 662-672 pp, 1999.
  Zarr, R. R.; Lagergren, E. S.
• Development of Thermal Insulation Standard Reference Materials Using "Good" Experimental Design.
  Thermal Conductivity, 24th and Thermal Expansion, 12th Joint Conferences. Proceedings. October 26-29, 1997, Pittsburgh, PA, Technomic Publishing Co., Inc., Lancaster, PA, Gaal, P. S.; Apostolescu, D. E.; Hurst, E. P., Editor(s)(s), 662-672 pp, 1999.
  Zarr, R. R.; Lagergren, E. S.
• Developments in the Application of the Performance Concept in Building.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 1. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Institute, Haifa, Israel, Becker, R.; Paciuk, M., Editor(s)(s), 1/1-11 pp, 1996.
  Gross, J. G.
• Developments in the Application of the Performance Concept in Building.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 1. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Institute, Haifa, Israel, Becker, R.; Paciuk, M., Editor(s)(s), 1/1-11 pp, 1996.
  Gross, J. G.
• Dielectric Properties and Morphology of Ferroelectric Ceramic-Polymer Composite Films.
  Microelectronics and Microsystem Packaging. Materials Research Society Symposium. Volume 682E. Proceedings. 2001, Boudreaux, J. D.; Dauskardt, R. H.; Last, H. T.; McCluskey, F. P., Editor(s)(s), N6.9.1-6 pp, 2001.
  Chiang, C. K.; Popielarz, R.; Sung, L. P.
• Diesel Adsorption to PVC and Iron During Contaminated Water Flow and Flushing Tests.
  NISTIR 7520; 52 p. June 2008.
  Kedzierski, M. A.
• Diffusion in Partially-Saturated Porous Materials.
  Materials and Structures, Vol. 32, 555-562, October 1999.
  Martys, N. S.
• Diffusivity-Porosity Relation for Cement Paste.
  Materials Science of Concrete: Sulfate Attack Mechanisms, Special Volume. Proceedings. October 5-6, 1998, Quebec, Canada, American Ceramic Society, Westerville, OH, 259-264 pp, 1999.
  Garboczi, E. J.; Bentz, D. P.
• Digital Archival of Construction Project Information.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 59-64 pp, 2002.
  Latimer, D. T.; Hendrickson, C.
• Digital-Image-Based Computer Modeling and Visualization of Cement-Based Materials.
  Emerging Technologies in Geotechnical Engineering. Transportation Research Record No. 1526. Soils, Geology, and Foundations. Proceedings. Transportation Research Board. Proceedings. January 1996, National Academy Press, Washington, DC, 129-134 pp, 1996.
  Bentz, D. P.; Garboczi, E. J.
• Digital Images and Computer Modeling.
  Experimental Methods in the Physical Sciences. Volume 35. Methods in the Physics of Porous Media. Chapter 1, Academic Press, San Diego, CA, 1-41 p., 1999.
  Garboczi, E. J.; Bentz, D. P.; Martys, N. S.
• Dimensional Analysis of Ionic Transport Problems in Hydrated Cement Systems. Part 1. Theoretical Considerations.
  Cement and Concrete Research, Vol. 30, No. 12, 1955-1960, December 2000.
  Barbarulo, R.; Marchand, J.; Snyder, K. A.; Prene, S.
• Dimensional Crossover in the Phase Separation Kinetics of Thin Polymer Blend Films.
  Physical Review Letters, Vol. 76, No. 23, 4368-4371, June 3, 1996.
  Sung, L. P.; Karim, A.; Douglas, J. F.; Han, C. C.
• Direct Measurement of Plowing Friction and Wear of a Polymer Thin Film Using the Atomic Force Microscope.
  Journal of Materials Research, Vol. 16, No. 5, 1487-1492, 2001.
  Du, B.; VanLandingham, M. R.; Zhang, Q.; He, T.
• Discomfort Due to Wind Near Buildings: Aerodynamic Concepts. Final Report. Building Research Translation.
  NBS TN 710-9; March 1978.
  Gandemer, J.
• Discussion of "The Use of the Flow Length Concept to Assess the Efficiency of Air Entrainment With Regards to Frost Durability: Part 1. Description of the Test Method" by R. Pleau and M. Pigeon.
  Cement, Concrete, and Aggregates, Vol. 19, No. 2, 116-119, December 1997.
  Snyder, K. A.
• Distributed Architecture for Standards Processing.
  Computing in Civil and Building Engineering, 6th International Conference. Proceedings. July 12-15, 1995, Berlin, Germany, 1995.
  Kiliccote, H.; Garrett, J. H., Jr.; Choi, B.; Reed, K. A.
• Distribution of Earthquake Input Energy in Structures.
  NISTIR 6903; 80 p. January 2003.
  Khashaee, P.; Mohraz, B.; Sadek, F.; Lew, H. S.; Gross, J. L.
• Doubling the Service Life of Concrete Structures. 1: Reducing Ion Mobility Using Nanoscale Viscosity Modifiers.
  Cement and Concrete Composites, Vol. 30, No. 8, 674-678, September 2008.
  Bentz, D. P.; Snyder, K. A.; Cass, L. C.; Peltz, M. A.
• Draft Design Guidelines for Concrete Beams Externally Strengthened With FRP.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/113-120 pp, 1999.
  GangaRao, V. S.; Vijay, P. V.
• Draft Guidelines for Evaluating Liquefaction Resistance Using Shear Wave Velocity Measurements and Simplified Procedures.
  NISTIR 6277; 134 p. March 1999.
  Andrus, R. D.; Stokoe, K. H., II; Chung, R. M.
• Draft Guidelines for Quality Control Testing of Elastomeric Seismic Isolation Systems.
  NISTIR 5345; 33 p. February 1994.
  Shenton, H. W., III
• Draft Manual for Seismic Isolation Design of Underground Structures.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 211-223 pp, 1998.
  Unjoh, S.; Hoshikuma, J.; Nagaya, K.; Murai, K.
• Drying/Hydration in Cement Pastes During Curing.
  Materials and Structures, Vol. 34, No. 243, 557-565, November 2001.
  Bentz, D. P.; Hansen, K. K.; Madsen, H. D.; Vallee, F.; Griesel, E. J.
• Ductile Cladding Connection Systems for Seismic Design.
  NIST GCR 98-758; 177 p. October 1998.
  Goodno, B. J.; Craig, J. I.; Dogan, T.; Towashiraporn, P.
• Durability Gap Analysis for Fiber-Reinforced Polymer Composites in Civil Infrastructure.
  Journal of Composites for Construction, Vol. 73, 238-247, August 2003.
  Karbhari, V. M.; Chin, J. W.; Hunston, D.; Benmokrane, B.; Juska, T.; Morgan, R.; Lesko, J. J.; Sorathia, U.; Reynaud, D.
• Duramodel for the Design of Cost-Effective Concrete Structures.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.7. November 9-10, 1998, 12-14 pp, 1999.
  Tourney, P.
• Dynamic Change Management for Fast-Tracking Construction Projects.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 81-89 pp, 2002.
  Park, M.
• Dynamic Characteristics of Five Buildings During Strong and Low-Amplitude Motions.
  International Journal of the Structural Design of Tall Buildings, Vol. 2, 1-15, 1993.
  Celebi, M.; Phan, L. T.; Marshall, R. D.

E

• Early-Age Properties of Cement-Based Materials. Part 1: Influence of Cement Fineness.
  Journal of Materials in Civil Engineering, Vol. 20, No. 7, 502-508, July 2008.
  Bentz, D. P.; Sant, G.; Weills, J.
• Earthquake Retrofit of Bridge Columns With Continuous Carbon Fiber Jackets. Volume 2. Design Guidelines.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/11-38 pp, 1999.
  Seible, F.; Priestley, M. J. N.; Innamorato, D.
• E-Concrete? Believe It!
  Constructor, The Construction Management Magazine, Vol. 84, No. 2, 20-20, February 2002.
  Bentz, D. P.; Garboczi, E. J.; Frohnsdorff, G. J. C.
• Economic Analysis of Building Code Impacts: A Suggested Approach.
  NBSIR 78-1528; 65 p. October 1978.
  McConnaughey, J. S.
• Economic Analysis of Residential Abandonment and Rehabilitation.
  NBSIR 76-1043; 102 p. May 1976.
  Colwell, P. F.
• Economic Analysis of Residential Fire Sprinkler Systems.
  NISTIR 7277; 67 p. December 2005.
  Brown, H.
• Economic Assessment of Selected Integration and Automation Technologies.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 275-280 pp, 2002.
  Chapman, R. E.
• Economic Objectives of Utility Companies and Developers in Evaluating a MIUS.
  NBSIR 75-721; November 1975.
  Bartter, B. J.
• Economics of Composites in Highway Bridges.
  Composites Design and Application, 22-25, Winter 1996.
  Ehlen, M. A.
• Economics of New-Technology Materials: A Case Study of FRP Bridge Decking.
  NISTIR 5864; 73 p. July 1996.
  Ehlen, M. A.; Marshall, H. E.
• Economics of Protection Against Progressive Collapse. Final Report.
  NBSIR 74-542; September 1974.
  Chapman, R. E.; Colwell, P. F.
• Effectiveness of a Heat Recovery Ventilator, an Outdoor Air Intake Damper and an Electrostatic Particulate Filter at Controlling Indoor Air Quality in Residential Buildings.
  Implementing the Results of Ventilation Research. AIVC Conference, 16th. Proceedings. September 19-22, 1995, Palm Springs, CA, 263-275 pp, 1995.
  Emmerich, S. J.; Persily, A. K.
• Effect of a Boiling Additive on R123 Condensation on a Vertical Integral-Fin Surface.
  NISTIR 6314; 31 p. March 1999.International Journal of Refrigeration, Vol. 23, 101-111, 2000.
  Kedzierski, M. A.
• Effect of a Boiling Additive on R123 Condensation on a Vertical Integral-Fin Surface.
  NISTIR 6314; 31 p. March 1999.International Journal of Refrigeration, Vol. 23, 101-111, 2000.
  Kedzierski, M. A.
• Effect of Aluminum Flake Orientation on Coating Appearance.
  Annual Meeting, 79th. Federation of Societies for Coatings Technology Meeting Technical Program. Federation of Societies for Coatings Technology (FSCT ICE) Meeting. Proceedings. November 5-7, 2001, Atlanta, GA, 1-15 pp, 2001.
  Sung, L. P.; Nadal, M. E.; McKnight, M. E.; Marx, E.; Dutruc-Rosset, R.; Laurenti, B.
• Effect of Central Fans and In-Duct Filters on Deposition Rates of Ultrafine and Fine Particles in an Occupied Townhouse.
  Atmospheric Environment, Vol. 38, No. 3, 405-413, January 2004.
  Wallace, L. A.; Emmerich, S. J.; Howard-Reed, C.
• Effect of CuO Nanolubricant on R134a Pool Boiling Heat Transfer With Extensive Measurement and Analysis Details.
  NISTIR 7454; 45 p. September 2007.
  Kedzierski, M. A.; Gong, M.
• Effect of CuO Nanoparticle Concentration on R134a/Lubricant Pool Boiling Heat Transfer.
  MNHT2008-52116;Micro/Nanoscale Heat Transfer International Conference. Proceedings. MNHT2008. January 6-9, 2008, Tainan, Taiwan, ASME, New York, NY, 1-8 pp, 2008.
  Kedzierski, M. A.
• Effect of CuO Nanoparticle Concentration on R134a/Lubricant Pool Boiling Heat Transfer With Extensive Analysis.
  NISTIR 7450; 33 p. September 2007.
  Kedzierski, M. A.
• Effect of Drying Shrinkage Cracks and Flexural Cracks on Concrete Bulk Permeability.
  NISTIR 6519; 26 p. May 2000.
  Snyder, K. A.
• Effect of Elastic Modulus of Capping Material on Measured Strength of High-Strength Concrete Cylinders.
  Cement, Concrete, and Aggregates, Vol. 20, No. 2, 227-234, December 1998.
  Vichit-Vadakan, W.; Carino, N. J.; Mullings, G. M.
• Effect of Heating Boundary Conditions on Pool Boiling Experiments.
  HVAC&R Research, Vol. 5, No. 4, 1-14, October 1999.
  Darabi, J.; Ohadi, M. M.; Fanni, M. A.; Dessiatoun, S. V.; Kedzierski, M. A.
• Effect of Inclination on the Performance of a Compact Brazed Plate Condenser and Evaporator.
  NISTIR 5767; 31 p. November 1995.Heat Transfer Engineering, Vol. 18, No. 3, 25-38, 1997.
  Kedzierski, M. A.
• Effect of Inclination on the Performance of a Compact Brazed Plate Condenser and Evaporator.
  NISTIR 5767; 31 p. November 1995.Heat Transfer Engineering, Vol. 18, No. 3, 25-38, 1997.
  Kedzierski, M. A.
• Effect of Load Path on Damage to Concrete Bridge Piers.
  NIST SP 904; August 1996.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 28th. May 14-17, 1996, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 149-158 pp, 1996.
  Taylor, A. W.; El-Bahy, A.; Stone, W. C.; Kunnath, S. K.
• Effect of Lubricant Concentration, Miscibility, and Viscosity on R134a Pool Boiling.
  NISTIR 6450; 61 p. January 2000.International Journal of Refrigeration, Vol. 24, 348-366, 2001.
  Kedzierski, M. A.
• Effect of Lubricant Concentration, Miscibility, and Viscosity on R134a Pool Boiling.
  NISTIR 6450; 61 p. January 2000.International Journal of Refrigeration, Vol. 24, 348-366, 2001.
  Kedzierski, M. A.
• Effect of Lubricant on R410A Horizontal Flow Boiling.
  NISTIR 7456; 37 p. September 2007.
  Sawant, N. N.; Kedzierski, M. A.; Brown, J. S.
• Effect of Microstructure of Fluorinated Acrylic Coatings on UV Degradation Testing.
  Polymer, Vol. 45, No. 19, 6639-6646, 2004.
  Sung, L. P.; Vicini, S.; Ho, D. L.; Hedhli, L.; Olmstead, C.; Wood, K. A.
• Effect of Refrigerant Oil Additive on R134a and R123 Boiling Heat Transfer Performance and Related Issues for GSA.
  NISTIR 7132; 63 p. June 2004.
  Kedzierski, M. A.
• Effect of Refrigerant Oil Additive on R134a and R123 Boiling Heat Transfer Performance.
  International Journal of Refrigeration, Vol. 30, No. 1, 144-154, January 2007.
  Kedzierski, M. A.
• Effect of Reservoir-Subbottom Energy Absorption on Hydrodynamic Forces on Dams.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 116-129 pp, 1998.
  Hall, R. L.; deBejar, L.; Sjostrom, K. J.; Matheu, E. E.
• Effect of Short Cycling and Fan Delay on the Efficiency of a Modified Residential Heat Pump.
  SF-86-17;ASHRAE (American Society of Heating, Refrigeration and Air-Conditioning Engineers) Transactions, Vol. 92, No. Part 1, January 1986.
  Mulroy, W. J.
• Effect of Speciation on the Apparent Diffusion Coefficient in Nonreactive Porous Systems.
  Cement and Concrete Research, Vol. 31, No. 12, 1837-1845, December 2001.
  Snyder, K. A.; Marchand, J.
• Effect of Statistical Fluctuation, Finite Size Error, and Digital Resolution on the Phase Percolation and Transport Properties of the NIST Cement Hydration Model.
  Cement and Concrete Research, Vol. 31, No. 10, 1501-1514, October 2001.
  Garboczi, E. J.; Bentz, D. P.
• Effect of Stress Relaxation, Self-Desiccation, and Water Absorption on the Alkali-Silica Reaction in Low Water/Cement Ratio Mortars.
  Cement and Concrete Research, Vol. 27, No. 10, 1553-1560, 1997.
  Ferraris, C. F.; Garboczi, E. J.; Davis, F. L.; Clifton, J. R.
• Effect of Temperature Stratification Near Heating Elements on the Measured Energy Factors of Electric Water Heaters.
  SL-08-009;ASHRAE Transactions, Vol. 114, No. 2, 1-15, June 2008.
  Healy, W. M.
• Effect of the Incorporation of Municipal Solid Waste Incineration Fly Ash in Cement Pases and Mortar. I. Experimental Study.
  Cement and Concrete Research, Vol. 32, No. 2, 303-311, 2002.
  Remond, S.; Pimienta, P.; Bentz, D. P.
• Effect of the Interfacial Transition Zone on the Conductivity of Portland Cement Mortars.
  Journal of the American Ceramic Society, Vol. 83, No. 5, 1137-1144, 2000.
  Garboczi, E. J.; Bentz, D. P.; Shane, J. D.; Mason, T. O.; Jennings, H. M.
• Effect of Usage Conditions on Household Refrigerator-Freezer and Freezer Energy Consumption.
  CH-77-13;ASHRAE Transactions, Vol. 83, No. 1, 1977.
  Grimes, J. W.; Mulroy, W.; Shomaker, B. L.
• Effect of Ventilation Systems and Air Filters on Decay Rates of Particles by Indoor Sources in an Occupied Townhouse.
  Atmospheric Environment, Vol. 37, No. 38, 5295-5306, December 2003.
  Howard-Reed, C.; Wallace, L. A.; Emmerich, S. J.
• Effects of Cement Particle Size Distribution on Performance Properties of Portland Cement-Based Materials.
  Cement and Concrete Research, Vol. 29, No. 10, 1663-1671, October 1999.
  Bentz, D. P.; Garboczi, E. J.; Haecker, C. J.; Jensen, O. M.
• Effects of Cement PSD on Porosity Percolation and Self-Desiccation.
  Self-Disiccation and Its Importance in Concrete Technology, 2nd (Second) International Research Seminar. Proceedings. June 18, 1999, Lund, Sweden, Persson, B.; Fagerlund, G., Editor(s)(s), 127-134 pp, 1999.
  Bentz, D. P.
• Effects of Civil Engineering Environments on Interfacial Properties of Polymer/Glass Fiber Composites.
  Composites Engineering, 4th International Conference. International Community for Composites Engineering (ICCE/4). University of New Orleans. July 6-12, 1997, Hawaii, Hui, D., Editor(s), 725-726 pp, 1997.
  Nguyen, T.; Aouadi, K.; Alsheh, D.; Chin, J. W.
• Effects of Elevated Temperature Exposure on Heating Characteristics, Spalling, and Residual Properties of High Performance Concrete.
  Materials and Structures, Vol. 34, 83-91, March 2001.
  Phan, L. T.; Lawson, J. R.; Davis, F. L.
• Effects of Environmental Exposure on Fiber-Reinforced Plastic (FRP) Materials Used in Construction.
  Journal of Composites Technology and Research, Vol. 19, No. 4, 205-213, October 1997.
  Chin, J. W.; Nguyen, T.; Aouadi, K.
• Effects of Humidity and Elevated Temperature on the Density and Thermal Conductivity of a Rigid Polyisocyanurate Foam Co-Blown With CCI3F and CO2.
  Society of the Plastics Industry of Canada's. Workshop on Long-Term Performance of Cellular Plastics, 3rd International. October 4-6, 1993, Ontario, Canada, 1-21 pp, 1993.Journal of Thermal Insulation and Building Environments, Vol. 17, 330-350, April 1994.
  Zarr, R. R.; Nguyen, T.
• Effects of Humidity and Elevated Temperature on the Density and Thermal Conductivity of a Rigid Polyisocyanurate Foam.
  Society of the Plastics Industry (SPI). Polyurethanes 92. Annual Technical/Marketing Conference, 34th. October 21-24, 1992, New Orleans, LA, 422-430 pp, 1992.Journal of Cellular Plastics, Vol. 30, 316-337, July 1994.
  Zarr, R. R.; Nguyen, T.
• Effects of Non-Uniform Refrigerant and Air Flow Distributions on Finned-Tube Evaporator Performance.
  ICR0040;Refrigeration International Congress, 21st IIR. (IRC2003). 10th Technical Session "Energy-Efficient Heating and Cooling Systems for Buildings. Proceedings. August 17-22, 2003, Washington, DC, 2004.
  Choi, J. M.; Payne, W. V.; Domanski, P. A.
• Effects of Relative Humidity on Photodegradation of Acrylic Melamine Coatings: A Quantitative Study.
  Fall Meeting. Volume 83. American Chemical Society. PSME. Proceedings. August 20-24, 2000, Washington, DC, 118-119 pp, 2000.
  Nguyen, T.; Martin, J. W.; Byrd, W. E.; Embree, N.
• Effects of Resource Impact Factors on Energy Conservation Standards for Buildings. Building Science Series (Final).
  NBS BSS 114; September 1978.
  Weber, S. F.
• Effects of Spectral UV on Degradation of Acrylic-Urethane Coatings.
  Global Connectivity. FSCT 80th Annual Meeting Technical Program. Proceedings. October 30-November 1, 2002, New Orleans, LA, Federation of Socieites for Coatings Technology, Blue Bell, PA, 2002.
  Nguyen, T.; Martin, J. W.; Byrd, E.; Embree, E. J.
• Effects of Stoichiometry and Epoxy Molecular Mass on Wettability and Interfacial Microstructures of Amine-Cured Epoxies.
  Adhesion Society Annual Meeting, 24th. Proceedings. February 2001, Williamsburg, VA, Adhesion Society, Blacksburg, VA, Emerson, J. A., Editor(s), 260-262 pp, 2001.
  Giraud, M.; Nguyen, T.; Gu, X.; VanLandingham, M. R.
• Effects of Test Conditions and Mixture Proportions on Behavior of High-Strength Concrete Exposed to High Temperature.
  ACI Materials Journal, Vol. 99, No. 1, 54-66, January/February 2002.
  Phan, L. T.; Carino, N. J.
• Effects of the Incorporation of Municipal Solid Waste Incineration Fly Ash in Cement Pastes and Mortars. Part 1: Experimental Study.
  Cement and Concrete Research, Vol. 32, No. 2, 303-311, 2002.
  Remond, S.; Pimienta, P.; Bentz, D. P.
• Effects of the Incorporation of Municipal Solid Waste Incineration Fly Ash in Cement Pastes and Mortars. Part 2: Modeling.
  Cement and Concrete Research, Vol. 32, No. 4, 565-576, April 2002.
  Remond, S.; Bentz, D. P.; Pimienta, P.
• Effects of Ultraviolet Radiation Exposure on Vinyl Ester Matri Resins: Chemical and Mechanical Characterization.
  American Society for Composites, 16th Technical Conference. Proceedings. September 9-12, 2001, Blacksburg, VA, 1-12 pp, 2001.
  Signor, A.; Chin, J. W.
• Effects of Ultraviolet Radiation Exposure on Vinyl Ester Resins: Characterization of Chemical, Physical and Mechanical Damage.
  Polymer Degradation and Stability, Vol. 79, 359-368, 2002.
  Signor, A. W.; VanLandingham, M. R.; Chin, J. W.
• Effects of Water, Salt Solution and Simulated Concrete Pore Solution on the Properties of Composite Matrix Resins Used in Civil Engineering Applications.
  Polymer Composites, Vol. 22, No. 22, 282-298, April 2001.
  Chin, J. W.; Aouadi, K.; Haight, M. R.; Hughes, W. L.; Nguyen, T.
• Efficiency of a 3-D Blade Control System in the Construction of Structure Layers by Road Grader: Automated Design-Build of Road Construction in Finland.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 475-480 pp, 2002.
  Heikkila, R.; Jaakkola, M.
• Efficient Open-Loop Control for a Class of Stochastic Multistable Systems.
  University of Victoria. CANCAM 95. Canadian Congress of Applied Mechanics, 15th. Proceedings. Volume 2. May 28-June 1, 1995, Victoria, British Columbia, Tabarrok, B.; Dost, S., Editor(s)(s), 780-781 pp, 1995.
  Simiu, E.; Franaszek, M.
• Elastic Moduli of a Material Containing Composite Inclusions: Effective Medium Theory and Finite Element Computations.
  Mechanics of Materials, Vol. 33, No. 8, 455-470, 2001.
  Garboczi, E. J.; Berryman, J. G.
• Elastic Moduli of Model Random Three-Dimensional Closed-Cell Cellular Solids.
  Acta Materialia, Vol. 49, No. 2, 189-197, 2001.
  Roberts, A. P.; Garboczi, E. J.
• Elastic Properties of a Tungsten-Silver Composite by Reconstruction and Computation.
  Journal of the Mechanics and Physics of Solids, Vol. 47, 2029-2055, 1999.
  Roberts, A. P.; Garboczi, E. J.
• Elastic Properties of Model Porous Ceramics.
  Journal of the American Ceramic Society, Vol. 83, No. 12, 3041-3048, 2000.
  Roberts, A. P.; Garboczi, E. J.
• Elastic Properties of Model Random Three-Dimensional Open-Cell Solids.
  Journal of the Mechanics and Physics of Solids, Vol. 50, No. 1, 33-55, 2002.
  Roberts, A. P.; Garboczi, E. J.
• Electrical Impedance Spectra to Monitor Damage During Tensile Loading of Cement Composites.
  Title No. 98-M34;ACI Materials Journal, Vol. 98, No. 4, 313-322, July/August 2001.
  Peled, A.; Torrents, J. M.; Mason, T. O.; Shah, S. P.; Garboczi, E. J.
• Electrode Configurations and Impedance Spectra of Cement Pastes.
  Journal of Materials Science, Vol. 30, 1217-1224, 1995.
  Ford, S. J.; Mason, T. O.; Christensen, B. J.; Coverdale, R. T.; Jennings, H. M.; Garboczi, E. J.
• Electrode Configurations and Impedance Spectra of Cement Pastes.
  Journal of Materials Science, Vol. 30, 1217-1224, 1995.
  Ford, S. J.; Mason, T. O.; Christensen, B. J.; Coverdale, R. T.; Jennings, H. M.; Garboczi, E. J.
• Electronic Commerce and Intellectual Property on the Internet: An Overview of the Concepts.
  Steel Structures Painting Council (SSPC). Technologies for a Diverse Industry. SSPC 1996 Seminars. Proceedings. SSPC 96-08. November 17-21, 1996, Charlotte, NC, 184-193 pp, 1996.
  Kaetzel, L. J.; Padilla, S.
• Electronic Data Exchange in the Pump Industry.
  Pump Users Symposium, 23rd International. Proceedings. March 5-8, 2007, Houston, TX, 55-66 pp, 2007.
  Burkhardt, K. R.; Dahl, T.; Palmer, M. E.
• Elevated Temperature Aging of Glass Fiber Reinforced Vinyl Ester and Isophthalic Polyester Composites in Water, Salt Water, and Concrete Pore Solution.
  American Society for Composites, 16th Technical Conference. Proceedings. September 9-12, 2001, Blacksburg, VA, 1-12 pp, 2001.
  Chin, J. W.; Hughes, W. L.; Signor, A.
• Emergency Response. (Fire Service Technologies and Guidelines.)
  Project 8;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 59 pp, 2004.
  Lawson, J. R.
• Emerging Building Automation Technology and Its Impact on Emergency Responders.
  NIST Technical Note 1479; NIST TN 1479; Presentation. Appendix 4.; February 2007.High-Rise and Large/Complex Incident Communications Workshop. Proceedings. Presentations. Appendix 4. June 20-21, 2006, Gaithersburg, MD, 98-101 pp, 2007.
  Bushby, S. T.
• EMISS: A Program for Estimating Local Air Pollution Emission Factors Related to Energy Use in Buildings. User's Guide and Reference Manual.
  NISTIR 5704; 33 p. October 1995.
  Petersen, S. R.
• Empirical Validation of a Transient Computer Model for Combined Heat and Moisture Transfer.
  U.S. Department of Energy (DOE); Oak Ridge Natiional Laboratory (ORNL); American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE); Building Environment and Thermal Envelope Council (BETEC). Thermal Performance of the Exterior Envelopes of Buildings VI Conference. Proceedings. Thermal VI. December 4-8, 1995, Clearwater Beach, FL, 283-295 pp, 1995.
  Rode, C.; Burch, D. M.
• Empirical Validation of a Transient Computer Model for Combined Heat and Moisture Transfer.
  U.S. Department of Energy (DOE); Oak Ridge Natiional Laboratory (ORNL); American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE); Building Environment and Thermal Envelope Council (BETEC). Thermal Performance of the Exterior Envelopes of Buildings VI Conference. Proceedings. Thermal VI. December 4-8, 1995, Clearwater Beach, FL, 283-295 pp, 1995.
  Rode, C.; Burch, D. M.
• Emulation of Automated Structural Steelwork Erection Using CIMsteel Integration Standards.
  IC-621;International Conference on Computing in Civil and Building Engineering (ICCCBE), Joint International 11th. Proceedings. June 14-16, 2006, Montreal, Canada, 1-10 pp, 2006.
  Kamat, V. R.; Lipman, R. R.
• Enemies at the Gate: Securing the BACnetRG Building.
  ASHRAE Journal (BACnet Today), Vol. 45, No. 11, B/24-28, November 2003.
  Holmberg, D. G.
• Energy and Water Consumption Testing of a Conventional Dishwasher and an Adaptive Control Dishwasher.
  International Appliance Technology Conference. Proceedings. May 1997, Columbus, OH, 1-13 pp, 1997.
  Castro, N. S.
• Energy-Based Method for Liquefaction Potential Evaluation. Phase 1. Feasibility Study.
  NIST GCR 96-701; 272 p. August 1996.
  Ostadan, F.; Deng, N.; Arango, I.
• Energy Conserving Discrete Boltzmann Equation for Nonideal Systems.
  International Journal of Modern Physics C, Vol. 10, No. 7, 1367-1382, 1999.
  Martys, N. S.
• Energy Impacts of Air Leakage in U.S. Office Buildings.
  Implementing the Results of Ventilation Research. AIVC Conference, 16th. Proceedings. September 19-22, 1995, Palm Springs, CA, 379-391 pp, 1995.
  VanBronkhorst, D. A.; Persily, A. K.; Emmerich, S. J.
• Energy Impacts of Infiltration and Ventilation in U.S. Office Buildings Using Multizone Airflow Simulation.
  IAQ and Energy 98 Conference. Proceedings. October 22-27, 1998, New Orleans, LA, 191-203 pp, 1998.
  Emmerich, S. J.; Persily, A. K.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis, 1996. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709. Data for the Federal Methodology for Life-Cycle Cost Analysis, Title 10, CFR, Part 436, Subpart A; and for the Energy Conservation Mandatory Performance Standards for New Federal Residential Buildings, Title 10 CFR, part 435.
  NISTIR 85-3273-10; 66 p. October 1995.
  Petersen, S. R.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis 1997. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-11; 66 p. July 1996.
  Petersen, S. R.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - April 1997. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-12; 66 p. April 1997.
  Fuller, S. K.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - April 1998. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-13; 65 p. April 1998.
  Fuller, S. K.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - April 1999. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-14R; 65 p. April 1999.
  Fuller, S. K.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - April 2000. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-15; 70 p. April 2000.
  Fuller, S. K.; Boyles, A. S.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - April 2001. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-16; 70 p. April 2001.
  Fuller, S. K.; Boyles, A. S.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - April 2002. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-17; 70 p. April 2002.
  Fuller, S. K.; Rushing, A. S.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis, April 2007. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709. Data for the 10, CFR, Part 436, Subpart A; and for the Energy Conservation Mandatory Performance Standards for New Federal Residential Buildings, Title 10 CFR, Part 435.
  NISTIR 85-3273-22; 72 p. May 2007.
  Rushing, A. S.; Lippiatt, B. C.
• Energy Price Indices and Discount Factors for Life-Cycle Cost Analysis - April 2008. Annual Supplement to NIST Handbook 135 and NBS Special Publication 709.
  NISTIR 85-3273-23; 71 p. May 2008.
  Rushing, A. S.; Lippiatt, B.C.
• Energy Test Procedures for Appliances.
  Energy and Buildings, Vol. 26, 23-33, 1997.
  Meier, A. K.; Hill, J. E.
• Energy Test Results of a Conventional Clothes Dryer and a Condenser Clothes Dryer.
  International Appliance Technical Conference, 49th. Proceedings. May 4-6, 1998, Columbus, OH, 11-21 pp, 1998.
  Kao, J. Y.
• Engineering Concrete Performance.
  Concrete International, Vol. 29, No. 11, 33-37, November 2007.
  Bentz, D. P.
• Engineering Economics.
  Chapter 7; Section 5; NFPA HFPE-02;SFPE Handbook of Fire Protection Engineering. 3rd Edition, DiNenno, P. J.; Drysdale, D.; Beyler, C. L.; Walton, W. D., Editor(s), 5/93-104 p., 2002.
  Watts, J. M., Jr.; Chapman, R. E.
• Enhancement of R123 Pool Boiling by the Addition of Hydrocarbons.
  NISTIR 6244; 49 p. October 1998.International Journal of Refrigeration, Vol. 23, 89-100, 2000.
  Kedzierski, M. A.
• Enhancement of R123 Pool Boiling by the Addition of Hydrocarbons.
  NISTIR 6244; 49 p. October 1998.International Journal of Refrigeration, Vol. 23, 89-100, 2000.
  Kedzierski, M. A.
• Enhancement of R123 Pool Boiling by the Addition of N-Hexane.
  NISTIR 5780; March 1996.
  Kedzierski, M. A.
• Enhancement of R123 Pool Boiling by the Addition of N-Hexane.
  Enhanced Heat Transfer, Vol. 6, 343-355, 1999.
  Kedzierski, M. A.
• Enhancements to Program IDARC: Modeling Inelastic Behavior of Welded Connections in Steel Moment-Resisting Frames.
  NIST GCR 95-673; 73 p. May 1995.
  Kunnath, S. K.
• Enhancing Coatings Diagnostics, Selection, and Use Through Computer Based Knowledge Systems.
  Steel Structures Painting Council (SSPC). Balancing Economics and Compliance for Maintaining Protective Coatings. SSPC 95 Protective Coatings Blazing New Trails. SSPC 95-09. Proceedings. November 9-16, 1995, Dallas, TX, 287-295 pp, 1995.
  Kaetzel, L. J.; McKnight, M. E.
• Enhancing Sensitivity of Atomic Force Microscopy for Characterization of Surface Chemical Heterogeneity.
  Adhesion Fundamentals: From Moecules to Mechanisms and Modeling. Annual Meeting of the Adhesion Society, 26th. Proceedings. February 23-26, 2003, Myrtle Beack, SC, Koberstein, J. T.; Anderson, G. L., Editor(s)(s), 185-187 pp, 2003.
  Gu, X.; VanLandingham, M. R.; Fasolka, M.; Martin, J. W.; Jean, J. Y.; Nguyen, T.
• Environmental Durability of Composites for Seismic Retrofit of Bridge Columns.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/83-96 pp, 1999.
  Steckel, G. L.; Hawkins, G. F.; Bauer, J. L., Jr.
• Environmental Effects on Composite Matrix Resins Used in Construction.
  Durability of Fibre Reinforced Polymer (FRP) Composites for Construction (CDCC'98), 1st International Conference. Proceedings. 1998, Canada, Benmokrane, B.; Rahman, H., Editor(s)(s), 229-241 pp, 1998.
  Chin, J. W.; Haight, M. R.; Hughes, W. L.; Nguyen, T.
• EPA: LAG No. DW-13-93903501-0 Expanding a Tool for Predicting Chloride Diffusivity in Concrete So It Can Be Used by Manufacturers to Evaluate the Durability of Concrete Made With Blended Cements. Part I: Characterizing Blended Cement Materials. Final Report
  NISTIR 7135; 37 p. August 2004.
  Feng, X.; Garboczi, E. J.; Bullard, J. W.; Bentz, D. P.; Snyder, K. A.; Stutzman, P. E.; Mason, T. O.
• Equation-of-State-Based Thermodynamic Charges for Nonazeotropic Refrigerant Mixtures.
  CH-85-05 No. 2;ASHRAE Transactios, Vol. 91, No. 1, 1985.
  Domanski, P. A.; Didion, D. A.
• Equipment Operator Training in the Age of Internet2.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 505-510 pp, 2002.
  Bernold, L. E.; Lloyd, J.; Vouk, M.
• Equivalent Number of Loading Cycles for the Seismic Testing of Passive Energy Dissipation Devices.
  U.S. National Conference on Earthquake Engineering, 7th Proceedings. (7NCEE). Theme: Urban Earthquake Risk. Earthquake Engineering Research Institute (EERI). July 21-25, 2002, Boston, MA, 1-10 pp, 2002.
  Sadek, F.; Riley, M. A.
• ERATES: A Computer Program for Calculating Time-of-Use, Block, and Demand Charges for Electricity Usage (Version 1.2). User's Guide and Reference Manual. 1997 Edition.
  NISTIR 5186; 1997 Edition; 49 p. January 1997.
  Petersen, S. R.
• Error Modeling for Automated Construction Equipment.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 255-262 pp, 2002.
  Cho, Y. K.; Haas, C. T.; Sreenivasan, S. V.; Liapi, K. A.
• Errors in GEV Analysis of Wind Epoch Maxima From Weibull Parents. (by R. I. Harris, Wind and Structures, Vol. 9, No. 3, p. 179-191, 2006.) Discussion.
  Wind and Structures, Vol. 10, No. 4, 399-400, July 2007.
  Harris, R. I.; Simiu, E.
• Estimates of Extreme Wind Effects and Wind Load Factors: Influence of Knowledge Uncertainties.
  Probabilistic Engineering Mechanics, Vol. 16, No. 4, 331-340, 2001.
  Minciarelli, F.; Gioffre, M.; Grigoriu, M.; Simiu, E.
• Estimates of Extreme Wind Effects and Wind Load Factors: Influence of Knowledge Uncertainties.
  Probabilistic Engineering Mechanics, Vol. 16, No. 4, 331-340, 2001.
  Minciarelli, F.; Gioffre, M.; Grigoriu, M.; Simiu, E.
• Estimates of Hurricane Wind Speeds by the 'Peaks Over Threshold' Method.
  NIST TN 1416; 49 p. February 1996.Journal of Structural Engineering, Vol. 124, No. 4, 445-449, April 1998.
  Simiu, E.; Heckert, N. A.; Whalen, T. M.
• Estimates of Hurricane Wind Speeds by the 'Peaks Over Threshold' Method.
  NIST TN 1416; 49 p. February 1996.Journal of Structural Engineering, Vol. 124, No. 4, 445-449, April 1998.
  Simiu, E.; Heckert, N. A.; Whalen, T. M.
• Estimating Economic Impacts of Government Technology Programs: Manufacturing Studies Using the REMI Model.
  NISTIR 6107; 59 p. December 1997.
  Ehlen, M. A.; Weber, S. F.
• Estimating Economic Impacts of Government Technology Programs: Manufacturing Studies Using the REMI Model.
  NISTIR 6107; 59 p. December 1997.
  Ehlen, M. A.; Weber, S. F.
• Estimating the 95th Percentile of the Paste-Void Spacing Distribution in Hardened Cement Paste Containing Air Entrainment.
  RILEM Workshop on Frost Dmage in Concrete (PRO 25). Proceedings. June 28-30, 1999, Minneapolis, MN, 75-85 pp, 1999.
  Snyder, K. A.
• Estimating the 95th Percentile of the Paste-Void Spacing Distribution in Hardened Cement Paste Containing Air Entrainment.
  RILEM Workshop on Frost Dmage in Concrete (PRO 25). Proceedings. June 28-30, 1999, Minneapolis, MN, 75-85 pp, 1999.
  Snyder, K. A.
• Estimating the Electrical Conductivity of Cement Paste Pore Solutions From OH-,K+ and Na+ concentrations.
  Cement and Concrete Research, Vol. 33, No. 6, 793-798, June 2003.
  Snyder, K. A.; Feng, X.; Keen, B. D.; Mason, T. O.
• Estimation of Absorbed Photolytic Dosage and Quantum Yield Using UV-VIS and FTIR Spectroscopies.
  Spring Meeting. Volume 82. American Chemical Society. PSME. Proceedings. March 26-30, 2000, San Francisco, CA, 373-374 pp, 2000.
  Martin, J. W.; Nguyen, T.; Byrd, W. E.; Embree, N.
• Estimation of Extreme Wind Speeds.
  Indian Society for Wind Engineering. Sponsored by University of Roorkee, New Delhi. International Association for Wind Engineering. State of the Art in Wind Engineering. Volume 1. Proceedings. International Conference on Wind Engineering, 9th. Davenport Sixtieth Birth Anniversary Volume. January 9-13, 1995, New Delhi, India, Wiley Eastern Limited, New Delhi, India, 109-123 pp, 1995.
  Simiu, E.
• Estimation of System Damping at the Lotung Site by Application of System Identification.
  NIST GCR 96-700; 195 p. August 1996.
  Glaser, S. D.; Leeds, A. L.
• Estimation of the Degree of Hydration of Blended Cement Pastes by a Scanning Electron Microscopy Point-Counting Procedure.
  Cement and Concrete Research, Vol. 34, No. 10, 1787-1793, October 2004.
  Feng, X.; Garboczi, E. J.; Bentz, D. P.; Stutzman, P. E.; Mason, T. O.
• Ethanol Droplet Combustion at Elevated Pressures and Enhanced Oxygen Concentrations.
  American Institute of Aeronautics and Astronautics (AIAA) Aerospace Sciences Meeting and Exhibit, 41st. Proceedings. January 6-9, 2003, Reno, NV, 1-7 pp, 2003.
  Yozgatligil, A.; Choi, M. Y.; Kazakov, A.; Dryer, F. L.; Manzello, S. L.; Dobashi, R.
• Evaluating Building IAQ and Ventilation With Indoor Carbon Dioxide.
  ASHRAE Transactions, Vol. 103, No. 2, 1997.
  Persily, A. K.
• Evaluating Building Integrated Photovoltaic Performance Models.
  IEEE Photovoltaic Specialists Conference (PVSC), 29th. Proceedings. May 20-24, 2002, New Orleans, LA, 1-4 pp, 2002.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Evaluating Building Integrated Photovoltaic Performance Models.
  IEEE Photovoltaic Specialists Conference (PVSC), 29th. Proceedings. May 20-24, 2002, New Orleans, LA, 1-4 pp, 2002.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Evaluating Incentives for Solar Heating.
  NBSIR 76-1127; 61 p. September 1976.
  Ruegg, R. T.
• Evaluation and Strengthening Guidelines for Federal Buildings - Assessment of Current Federal Agency Evaluation Programs and Rehabilitation Criteria and Development of Typical Costs for Seismic Rehabilitation.
  NIST GCR 94-650; ICSSC TR-13; 175 p. March 1994.
  H. J. Degenkolb Associates, Engineers; Rutherford and Chekene
• Evaluation and Strengthening Guidelines for Federal Buildings - Identification of Current Federal Agency Programs.
  NIST GCR 94-649; ICSSC TR-12; 150 p. March 1994.
  H. J. Degenkolb Associates, Engineers; Rutherford and Chekene
• Evaluation of Aerodynamic Drag and Torque for External Tanks in Low Earth Orbit.
  Journal of Research of the National Institute of Standards and Technology, Vol. 111, No. 2, 143-159, March/April 2006.
  Stone, W. C.; Witzgall, C.
• Evaluation of ASTM Standard Consolidation Requirements for Preparing High-Strength Concrete Cylinders.
  High-Performance Concrete: Design and Materials and Recent Advances in Concrete Technology, 3rd Proceedings. ACI International Conference. American Concrete Institute. ACI SP-172. ACI SP 172-39. December 2-5, 1997, Kuala Lumpur, Malaysia, American Concrete Institute, Farmington Hills, MI, 733-768 pp, 1997.
  Carino, N. J.; Mullings, G. M.; Guthrie, W. F.
• Evaluation of Carbon Dioxide as R-22 Substitute for Residential Air-Conditioning.
  HI-02-13-3;Annual Meeting, 2002. Proceedings. 2002, Honolulu, HI, 2002.ASHRAE Transactions, Vol. 108, No. 2, 954-964.
  Brown, J. S.; Kim, Y.; Domanski, P. A.
• Evaluation of Flammable Refrigerants for Use in a Water-to-Water Residential Heat Pump.
  International Institute of Refrigeration. Applications for Natural Refrigerants. Proceedings. September 3-6, 1996, Aarhus, Denmark, 467-476 pp, 1996.
  Choi, D. K.; Domanski, P. A.; Didion, D. A.
• Evaluation of GSA Maintenance Practices of Large Centrifugal Chillers and Review of GSA Refrigerant Management Practices.
  NISTIR 5336; 51 p. January 1994.
  Kao, J. Y.
• Evaluation of Kitchen Cooking Appliance Efficiency Test Procedures.
  NISTIR 6181; 100 p. January 1999.
  Nabinger, S. J.
• Evaluation of LEED Using Life Cycle Assessment Methods.
  NIST GCR 02-836; 157 p. September 2002.
  Scheuer, C. W.; Keoleian, G. A.
• Evaluation of Seismic Performance Parameters.
  Seismic Design Methodologies for the Next Generation of Codes International Workshop. Proceedings. June 24-27, 1997, Bled, Slovenia, Fajfar, P.; Krawinkler, H., Editor(s)(s), 151-157 pp, 1997.
  Lew, H. S.
• Evaluation of Standard Product Models for Supporting Automated Erection of Structural Steelwork.
  Automation in Construction, Vol. 16, No. 2, 232-241, March 2007.
  Kamat, V. R.; Lipman, R. R.
• Evaluation of the AP 230 Application Protocol.
  NIST GCR 97-738; 48 p. September 1997.
  Garrett, J. H., Jr.; Fenves, S. J.; Kiliccote, H.
• Evaluation of the External Force Term in the Discrete Boltzmann Equation.
  Physical Review E, Vol. 58, No. 5, 6855-6857, November 1998.
  Martys, N. S.; Shan, X.; Chen, H.
• Evaluation of the Seismic Capacity of an Existing Thick Wall Reinforced Concrete Structure Using Probabilistic Criteria.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 185-195 pp, 1998.
  Loceff, F.; Mertz, G.; Rawls, G.
• Evaporation and Condensation Heat Transfer Performance of Flammable Refrigerants in a Brazed Plate Heat Exchanger.
  NISTIR 6541; 29 p. July 2000.
  Palmer, S. C.; Payne, W. V.; Domanski, P. A.
• Evolution of Refrigerant Application.
  International Congress on Refrigeration. Proceedings. May 4, 1999, Milan, Italy, 1-14 pp, 1999.
  Domanski, P. A.
• EVSIM: An Evaporator Simulation Model Accounting for Refrigerant and One Dimensional Air Distribution.
  NISTIR 89-4133; 142 p. August 1989.
  Domanski, P. A.
• E-Work: The Next Iteration in Constructioin Materials Management Systems.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 65-72 pp, 2002.
  Castro-Lacouture, D.; Skibniewski, M. J.
• Executive Order 12941: Seismic Safety of Existing Federally Owned or Leased Buildings - Its History, Content and Objectives.
  EERI Regional Seminar Series. Kobe Earthquake: Impact on the Executive Order for Existing Buildings. EERI Technical Seminar. December 5, 1995, Alexandria, VA, 1-4 pp, 1995.
  Todd, D. R.
• Exergy Analysis of Heat Pumps.
  NT-37-17-3;ASHRAE (American Society of Heating, Refrigeration and Air-Conditioning Engineers) Transactions, Vol. 93, No. Part 2, 1781-1797, 1987.
  Tsaros, T. L.; Gaggioli, R. A.; Domanski, P. A.
• Exits in Multistable Systems Excited by Coin-Toss Square-Wave Dichotomous Noise: A Chaotic Dynamics Approach.
  Physical Review E, Vol. 52, No. 5, 4669-4675, November 1995.
  Sivathanu, Y. R.; Hagwood, C.; Simiu, E.
• Exits in Multistable Systems Excited by Coin-Toss Square-Wave Dichotomous Noise: A Chaotic Dynamics Approach.
  Physical Review E, Vol. 52, No. 5, 4669-4675, November 1995.
  Sivathanu, Y. R.; Hagwood, C.; Simiu, E.
• Exits in Second-Order Nonlinear Systems Driven by Dichotomous Noise.
  Computation of Stochastic Mechanics, 2nd International Conference. Proceedings. June 13-15, 1994, Athens, Greece, Balkema, Rotterdam, Spanos, P. D., Editor(s), 395-401 pp, 1995.
  Simiu, E.; Hagwood, C.
• Expanded Polystyrene Board as a Standard Reference Material for Thermal Resistance Measurement Systems.
  ; 42 p.Insulation Materials Testing and Applications. Volume 3. ASTM Committee C-16. Proceedings. ASTM STP 1320. May 15-17, 1997, Quebec, Canada, ASTM, West Conshohocken, PA, 1997.
  Zarr, R. R.
• Experiences With Point Cloud Registration.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 349-355 pp, 2002.
  Witzgall, C.; Cheok, G. S.
• Experiences With the Design and Production of an Industrial, Flexible And Demountable (IFD) Building System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 167-172 pp, 2002.
  vanGassel, F.
• Experiences With Using Solar Photovoltaics to Heat Domestic Water.
  Solar Energy: The Power to Choose. International Solar Energy Conference. Forum 2001. Proceedings. April 21-25, 2001, Washington, DC, 2001.
  Dougherty, B. P.; Fanney, A. H.
• Experimental and Computational Studies of Oxidizer and Fuel Side Addition of Ethanol to Opposed Flow Air/Ethylene Flames.
  Combustion and Flame, Vol. 142, No. 4, 413-427, September 2005.
  McNesby, K. L.; Miziolek, A. W.; Nguyen, T.; Delucia, F. C.; Skaggs, R. R.; Litzinger, T. A.
• Experimental and Simulated Performance of Optimal Control of Building Thermal Storage.
  3776;ASHRAE Transactions, Vol. 100, No. 1, 402-414, January 1994.
  Morris, F. B.; Braun, J. E.; Treado, S. J.
• Experimental Comparison of Ammonia-Water and Ammonia-Water Lithium Bromide Mixtures in an Absorption Heat Pump.
  HI-85-36 No. 4;ASHRAE Technical Data Bulletin (p. 52-60) AND ASHRAE Transactions, Vol. 91, No. 2B, 1837-1846, June 1985.
  McLinden, M. O.; Radermacher, R.
• Experimental Determination of Forced Convection Evaporative Heat Transfer Coefficients for Nonazeotropic Refrigerant Mixtures.
  ASME 83-WA/HT-54;Winter Annual Meeting, 1983. American Society of Mechanical Engineers (ASME). November 1983, 1983.
  Radermacher, R.; Ross, H.; Didion, D. A.
• Experimental Evaluation of Engine-Driven Heat Pump Systems.
  Winter Annual Meeting, 1978. American Society of Mechanical Engineers (ASME). December 11-15, 1978, San Francisco, CA, 1978.
  Maxwell, B. R.; Didion, D. A.
• Experimental Evaluation of the Flammability and Performance Potentials of Two Azeotropic Refrigerant Mixtures.
  Korean Society of Mechanical Engineers. Symposium on Transport Phenomena (ISTP-6) in Thermal Engineering, 6th International. Volume 3. May 9-13, 1993, Seoul, Korea, Lee, J. S.; Chung, S. H.; Kim, K. H., Editor(s)(s), 153-158 pp, 1993.
  Kim, M. S.; Mulroy, W. J.; Didion, D. A.
• Experimental Evaluation of Two Refrigerant Mixtures in a Breadboard Air Conditioner.
  DOE (U.S. Department of Energy)/ORNL (Oak Ridge National Laboratory) Heat Pump Conference. Proceedings. April 1988, Washington, DC, 1988.
  Mulroy, W.; Kauffeld, M.; McLinden, M.; Didion, D.
• Experimental Limitations in Impedance Spectroscopy. Part 3. Effect of Reference Electrode Geometry/Position.
  Solid State Ionics, Vol. 96, 153-182, 1997.
  Hsieh, G.; Mason, T. O.; Garboczi, E. J.; Pederson, L. R.
• Experimental Limitations in Impedance Spectroscopy. Part 4. Electrode Contact Effects.
  Solid State Ionics, Vol. 98, 93-104, 1997.
  Hwang, J. H.; Kirkpatrick, K. S.; Mason, T. O.; Garboczi, E. J.
• Experimental Measurements of Condensation on Vertical Plates With Enhanced Fins.
  Boiling and Condensation in HeatTransfer. Proceedings. American Society of Mechanical Engineers (ASME). 1987, Boston, MA, 87-95 pp, 1987.
  Kedzierski, M. A.
• Experimental Plan for Testing the Mechanical Properties of High-Strength Concrete at Elevated Temperatures.
  NISTIR 6210; 29 p. May 1999.
  Phan, L. T.; Peacock, R. D.
• Experimental Study of Joint Connections in Precast Concrete Walls.
  Earthquake Engineering Research Institute. Earthquake Awareness and Mitigation Across the Nation. U.S. National Conference, Fifth (5th). Proceedings. Volume 2. July 10-14, 1994, Chicago, IL, 579-587 pp, 1994.
  Schultz, A. E.; Magana, R. A.; Tadros, M. K.; Huo, X. M.
• Experimental Testing of Roof to Wall Connections in Wood Frame Houses.
  NISTIR 6938; 76 p. April 2003.
  Riley, M. A.; Sadek, F.
• Experimental Transient Performance of a Heat Pump Equipped With a Distillation Column.
  International Journal of Refrigeration, Vol. 30, No. 3, 499-505, May 2007.
  Gebbie, J. G.; Jensen, M. K.; Domanski, P. A.
• Experimental Verification of a Moisture and Heat Transfer Model in the Hygroscopic Regime.
  U.S. Department of Energy (DOE); Oak Ridge National Laboratory (ORNL); American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE); Building Environment and Thermal Envelope Council (BETEC). Thermal Performance of the Exterior Envelopes of Building VI Conference. Proceedings. Thermal VI. December 4-8, 1995, Clearwater Beach, FL, 273-282 pp, 1995.
  Burch, D. M.; Zarr, R. R.; Fanney, A. H.
• Expert/Knowledge Based Systems for Materials in the Construction Industry: State-of-the-Art Report.
  RILEM Journal of Materials and Structures, Vol. 28, No. 177, 160-174, 1995.
  Kaetzel, L. J.; Clifton, J. R.
• Expert Systems Applied to Spacecraft Fire Safety.
  Chapter 5;Special Problems in Fire Protection Engineering. Volume 4. Chapter 5. Applied Fire Science in Transition Series, Baywood Publishing Co. Inc., Amityville, NY, DeCicco, P. R., Editor, 61-71 p., 2002.
  Smith, R. L.; Kashiwagi, T.
• Exploratory Study of Glowing Electrical Connections. Final Report.
  NBS BSS 103; 29 p. October 1977.
  Meese, W. J.; Beausoliel, R. W.
• Extreme Value Theory and Applications: Proceedings of the Conference on Extreme Value Theory and Applications. Volume 3. Gaithersburg, Maryland. May 1993.
  NIST SP 866; 242 p. August 1994.
  Galambos, J.; Lechner, J. A.; Simiu, E.; Hagwood, C.
• Extreme Wind Distribution Tails: A 'Peaks Over Threshold' Approach.
  NIST BSS 174; 77 p. March 1995.Journal of Structural Engineering, Vol. 122, No. 5, 539-547, May 1996.
  Simiu, E.; Heckert, N. A.
• Extreme Wind Distribution Tails: A 'Peaks Over Threshold' Approach.
  NIST BSS 174; 77 p. March 1995.Journal of Structural Engineering, Vol. 122, No. 5, 539-547, May 1996.
  Simiu, E.; Heckert, N. A.
• Extreme Wind Estimates by the Conditional Mean Exceedance Procedure.
  NISTIR 5531; 16 p. April 1995.
  Gross, J. L.; Simiu, E.; Heckert, N. A.; Lechner, J. A.
• Extreme Wind Load Estimates Based on Gumbel Distribution of Dynamic Pressures: An Assessment.
  Structural Safety, Vol. 23, No. 3, 221-228, 2001.
  Simiu, E.; Heckert, N. A.; Filliben, J. J.; Johnson, S. K.
• Extreme Winds Estimation by 'Peaks Over Threshold' and Epochal Methods.
  American Society of Civil Engineers (ASCI). Structures Congress XII. Volume 2. April 24-28, 1994, Atlanta, GA, American Society of Civil Engineers, New York, NY, Baker, N. C.; Goodno, B. J., Editor(s)(s), 1472-1477 pp, 1994.
  Gross, J. L.; Heckert, N. A.; Lechner, J. A.; Simiu, E.

F

• Fabrication of a Guarded-Hot-Plate Apparatus for Use Over an Extended Temperature Range and in a Controlled Gas Atmosphere.
  International Thermal Conductivity 28th Conference/International Thermal Expansion 16th Symposium. Proceedings. June 26-29, 2005, New Brunswick, Canada, DEStech Publications, Inc., Dinwiddie, R.; White, M. A.; McElroy, D. L., Editor(s)(s), 235-245 pp, 2005.
  Zarr, R. R.; Flynn, D. R.; Hettenhouser, J. W.; Brandenburg, N. J.; Healy, W. M.
• Facade Cleaning Robot for the Skyscraper.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 229-233 pp, 2002.
  Bock, T.; Bulgakow, A.; Ashida, S.
• Factors Affecting the Energy Consumption of Two Refrigerator-Freezers.
  SA-96-7-1;ASHRAE Transactions, Vol. 102, No. 2, 1-11, 1996.
  Kao, J. Y.; Kelly, G. E.
• Factors Affecting Ultrasonic Extraction of Lead From Household Paint Films: Further Investigations.
  NISTIR 6948; 33 p. March 2003.
  Rossiter, W. J., Jr.; Toman, B.; McKnight, M. E.; Emenanjo, I.; Anaraki, M. B.
• Factors Affecting Ultrasonic Extraction of Lead From Household Paint Films: Further Investigations.
  NISTIR 6948; 33 p. March 2003.
  Rossiter, W. J., Jr.; Toman, B.; McKnight, M. E.; Emenanjo, I.; Anaraki, M. B.
• Factors Affecting Ultrasonic Extraction of Lead From Laboratory-Prepared Household Paint Films.
  NISTIR 6834; 48 p. May 2002.
  Rossiter, W. J., Jr.; Toman, B.; McKnight, M. E.; Anaraki, M. B.
• Factors Affecting Ultrasonic Extraction of Lead From Laboratory-Prepared Household Paint Films.
  NISTIR 6834; 48 p. May 2002.
  Rossiter, W. J., Jr.; Toman, B.; McKnight, M. E.; Anaraki, M. B.
• Failure Analysis of Welded Steel Moment Frames Damaged in the Northridge Earthquake.
  NISTIR 5944; 175 p. January 1997.
  Kaufmann, E. J.; Fisher, J. W.; DiJulio, R. M., Jr.; Gross, J. L.

• 
  NIST SP 863; June 1994.National Institute of Standards and Technology and the U.S. Green Building Council (USGBC). U.S. Green Building Conference, 1994. February 16-17, 1994, Gaithersburg, MD, Fanney, A. H.; Whitter, K. M.; Traugott, A. E.; Simon, L. N., Editor(s)(s), 150 pp, 1994.
  Fanney, A. H.; Whitter, K. M.; Cohn, T. B.

F

• Fast Variable-Amplitude Cold Gas Thruster.
  Journal of Spacecraft and Rockets, Vol. 32, No. 2, 335-343, March/April 1995.
  Stone, W. C.
• Fatigue Model for Fiber-Reinforced Polymeric Composites for Offshore Applications.
  NIST TN 1434; 43 p. September 2000.
  Nguyen, T.; Tang, H. C.; Chuang, T. J.; Chin, J. W.; Wu, H. F.; Lesko, J.
• Fatigue Model for Fiber-Reinforced Polymeric Composites in Civil Engineering Applications.
  Composites Engineering, 5th International Conference. Proceedings. International Community for Composites Engineering and College of Engineering University of New Orleans. July 5-11, 1998, Las Vegas, NV, Hui, D., Editor(s), 881-882 pp, 1998.
  Tang, H. C.; Nguyen, T.; Chung, T.; Chin, J. W.; Lesko, J.
• Fatigue Model for Fiber-Reinforced Polymeric Composites.
  Journal of Materials in Civil Engineering, Vol. 12, No. 2, 97-104, May 2000.
  Tang, H. C.; Nguyen, T.; Chuang, T. J.; Chin, J. W.; Lesko, J.; Wu, H. F.
• Fault Detection in an Air-Handling Unit Using Residual and Recursive Parameter Identification Methods.
  AT-96-3-2;ASHRAE Transactions, Vol. 102, No. 1, 528-539, 1996.
  Lee, W. Y.; Park, C.; Kelly, G. E.
• Fault Diagnosis and Temperature Sensor Recovery for an Air-Handling Unit.
  ASHRAE Transactions, Vol. 103, No. 1, [pages unknown], 1997.
  Lee, W. Y.; House, J. M.; Shin, D. R.
• Fault Diagnosis of an Air-Handling Unit Using Artificial Neural Networks.
  AT-96-3-3;Fault Detection and Diagnosis for HVAC Systems Symposium. Part 1. Proceedings. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. (ASHRAE). February 17-21, 1995, Atlanta, GA, 1995.ASHRAE Transactions, Vol. 102, No. 1, 540-549, 1996.
  Lee, W. Y.; Park, C.; House, J. M.; Kelly, G. E.
• Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  CTBUH2005;Renewing the Urban Landscape. 7th World Congress. Council on Tall Buildings and Urban Habitat (CTBUH2005). Proceedings. October 16-19, 2005, New York City, NY, 2005.
  Sunder, S. S.
• Few Caveats on Carbon Dioxide Monitoring.
  IAQ Journal, Vol. 4, No. 1, 22-25, Summer 1994.
  Persily, A. K.
• Fibers, Percolation, and Spalling of High-Performance Concrete.
  ACI Materials Journal, Vol. 97, No. 3, 351-359, May/June 2000.
  Bentz, D. P.
• Field Demonstration of Laser Scanning for Excavation Measurement.
  Automation and Robotics in Construction, 17th International Symposium. Proceedings. 2000, 683-688 pp, 2000.
  Cheok, G. S.; Lipman, R. R.; Witzgall, C.; Bernal, J.; Stone, W. C.
• Field Evaluation of the System for Calibration of the Marshall Compaction Hammer.
  NISTIR 5553; FHWA-RD-95-063; 76 p. February 1995.
  Shenton, H. W., III; Cassidy, M. M.
• Field Monitoring of a Variable-Speed Integrated Heat Pump/Water-Heating Appliance.
  Paper 3888;ASHRAE Transactions, Vol. 101, No. 2, 1-15, 1995.
  Fanney, A. H.
• Field Performance of Photovoltaic Solar Water Heating Systems.
  International Solar Energy Conference. Proceedings. Solar Engineering 1997. Held in Conjunction With The Solar Energy Forum. American Society of Mechanical Engineers. April 27-30, 1997, Washington, DC, American Society of Mechanical Engineers, New York, NY, Claridge, D. E.; Pacheco, J. E., Editor(s)(s), 171-182 pp, 1997.ASME Journal of Solar Energy Engineering, Vol. 119, 265-272, November 1997.
  Fanney, A. H.; Dougherty, B. P.; Kramp, K. P.
• Field Study of the Effect of Wall Mass on the Heating and Cooling Loads of Residential Buildings. (Log Home Report.)
  Oak Ridge National Laboaratory. Building Thermal Mass Seminar. Proceedings. June 2-3, 1982, Knoxville, TN, 1-47 pp, 1982.
  Burch, D. M.; Remmert, W. E.; Krintz, D. F.; Barnes, C. S.
• Field Test of a Photovoltaic Water Heater.
  HI-02-8-3;ASHRAE Transactions, Vol. 108, No. 2, 1-12, 2002.
  Dougherty, B. P.; Fanney, A. H.; Richardson, J. O.
• Final Report on the Collapse of World Trade Center Building 7.
  NIST NCSTAR 1A; 130 p. November 2008.
  National Institute of Standards and Technology; National Construction Safety Team
• Finite Element and Finite Difference Programs for Computing the Linear Electric and Elastic Properties of Digital Images of Random Materials.
  NISTIR 6269; 211 p. December 1998.
  Garboczi, E. J.
• Finite Element Stress Computations Applied to Images of Damaged Concrete: A Possible New Diagnostic Tool for Concrete Petrography.
  Cement Microscopy, 23nd International Conference. Proceedings. April 29-May 4, 2001, Albuquerque, NM, 352-365 pp, 2001.
  Stutzman, P. E.; Bright, D. S.; Garboczi, E. J.
• Finned-Tube Evaporator Model With a Visual Interface.
  International Congress of Refrigeration 20th. IIR/IIF. Proceedings. September 19-24, 1999, Sydney, Australia, 1-7 pp, 1999.
  Domanski, P. A.
• Finned-Tube Heat Exchanger Simulation Program With Refrigerant Circuitry Optimization Capability.
  Paper B 1/6;Design and Operation of Environmentally Friendly Refrigeration and AC System. International Conference. Proceedings. October 15-17, 2008, Poznan, Poland, 1-8 pp, 2008.
  Domanski, P. A.; Yashar, D. A.; Kaufman, K.
• Fire Hazards and Mitigation Measures Associated With Seismic Damage of Water Heaters.
  NIST GCR 97-732; 98 p. December 1997.
  Mroz, M. P.; Soong, T. T.
• Fire Hazards and Mitigation Measures Associated With Seismic Damage of Water Heaters.
  NIST GCR 97-732; 98 p. December 1997.
  Mroz, M. P.; Soong, T. T.
• Fire in Connecticut. Annual Fire Incident Report, 1989.
  Annual Fire Incident Report; 67 p. 1989.
  Bureau of State Fire Marshal, Connecticut
• Fire Performance of High-Strength Concrete: A Report of the State-of-the-Art.
  NISTIR 5934; 115 p. December 1996.
  Phan, L. T.
• Fire Performance of High Strength Concrete: Research Needs.
  Advanced Technology in Structural Engineering. ASCE/SEI Structures Congress 2000. Proceedings. May 8-10, 2000, Philadelphia, PA, Elgaaly, M., Editor(s), 2000.
  Phan, L. T.; Carino, N. J.
• Fire Performance of Structures. Report of Task Committee I.
  Technical Memorandum of PWRI 4075; Report of Task Committee I;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 39th. Technical Memorandum of PWRI 4075. Proceedings. May 14-16, 2007, Tsukuba, Japan, 469-470 pp, 2007.
  Lew, H. S.; Cauffman, S. A.; Kohno, M.; Naruse, T.
• Fire Protection of Structural Steel in High-Rise Buildings.
  NIST GCR 04-872; 88 p. July 2004.
  Goode, M. G.
• Fire Resistance and Residual Strength of HSC Exposed to Hydrocarbon Fire.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B2. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 59-67 pp, 1997.
  Jensen, J. J.; Hammer, T. A.; Hansen, P. A.
• Fire Resistance Proficiency Testing of Gypsum/Steel-Stud Wall Assemblies.
  Technical Memorandum of PWRI 4075;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 39th. Technical Memorandum of PWRI 4075. Proceedings. May 14-16, 2007, Tsukuba, Japan, 334-344 pp, 2007.
  Grosshandler, W. L.
• Fire Resistance Tests of the Floor Truss Systems. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-6B; 202 p. September 2005.
  Gross, J. L.; Hervey, F.; Izydorek, M.; Mammoser, J.; Treadway, J.
• Fire Test on Normal and High-Strength Reinforced Concrete Columns.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B7. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 109-124 pp, 1997.
  Aldea, C. M.; Franssen, J. M.; Dotreppe, J. C.
• Five-Year Experience of Halon 2402 Reclaiming.
  Halon Options Technical Working Conference. Proceedings. HOTWC 2001. Sponsored by: University of New Mexico, Fire Suppression Systems Assoc., Fire and Safety Group, GlobeTech, Inc., Halon Alternative Research Corp., Hughes Associates, Inc., Kidde plc., Modular Protection, Corp., Next Generation Fire Suppression Technology Program, Sandia National Laboratories, Summit Environmental Corp., Inc. and 3M Specialty Materials. April 24-26, 2001, Albuquerque, NM, Daniels, B. L.; Cole, D. G., Editor(s)(s), 304-305 pp, 2001.
  Belevtsev, E. G.; Kunina, L. N.
• Force Sensor by Driving Hydraulic Cylinders: Identification of Inertial Parameters and Tests.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 431-436 pp, 2002.
  Malaguti, F.; Zaghi, S.
• Four-Dimensional X-Ray Microtomography Study of Water Movement During Internal Curing.
  Volume Changes of Hardening Concrete: Testing and Mitigation, Internaitonal RILEM Conference. Proceedings. August 20-23, 2006, Bagneux, France, Jensen, O. M.; Lura, P.; Kovler, K., Editor(s)(s), 11-20 pp, 2006.
  Bentz, D. P.; Halleck, P. M.; Grader, A. S.; Roberts, J. W.
• Fourth (4th) International Symposium on Roofing Technology, Gaithersburg, MD, September 17-19, 1997. Conference Report.
  Journal of Research of the National Institute of Standards and Technology, Vol. 103, No. 2, 209-215, March/April 1998.
  Rossiter, W. J., Jr.
• Fractal Growth in Hydrodynamic Dispersion Through Random Porous Media.
  Physical Review E, Vol. 50, No. 1, 335-342, July 1994.
  Martys, N. S.
• Fracture Simulations of Concrete Using Lattice Models: Computational Aspects.
  Engineering Fracture Mechanics, Vol. 57, No. 2/3, 319-332, 1997.
  Schlangen, E.; Garboczi, E. J.
• Fragility Curves, Damage Matrices, and Wind-Induced Loss Estimation.
  Computer Simulation in Risk Analysis and Hazard Mitigation, 3rd (Third) International Conference. Proceedings. June 19-21, 2002, Sintra, Portugal, 119-126 pp, 2002.
  Filliben, J. J.; Gurley, K.; Pinelli, J. P.; Simiu, E.
• Framework for Information Technology Integration in Process Plant and Related Industries.
  NIST GCR 94-657; 74 p. July 1994.
  Beazley, W. G.; Chapman, J. B.
• Frequency-Dependent Electrical Mixing Law Behavior in Spherical Particle Composites.
  Journal of Electroceramics, Vol. 9, No. 1, 49-56, October 2002.
  Campo, M. A.; Woo, L. Y.; Mason, T. O.; Garboczi, E. J.
• Fresh Concrete Rheology - Recent Developments .
  Materials Science of Concrete VI. Proceedings. American Ceramic Society. December 2001, American Ceramic Society, Westerville, OH, Mindess, S.; Skalny, J., Editor(s)(s), 215-241 pp, 2001.
  Ferraris, C. F.; deLarrard, F.; Martys, N. S.
• Friend or Foe? Communication Gateways.
  ASHRAE Journal, Vol. 40, No. 4, 50-53, April 1998.
  Bushby, S. T.
• Fujita Tornado Intensity Scale: A Critique Based on Observations of the Jarrell Tornado of May 27, 1997.
  NIST TN 1426; 23 p. July 1998.
  Phan, L. T.; Simiu, E.
• Fujita Tornado Intensity Scale: A Reassessment From Structural Engineering Perspective.
  Design for Wind and Wind Hazard Mitigation, 2nd U.S./Japan Workshop. Technical Memorandum of PWRI 3680. Proceedings. May 24-26, 1999, Tsukuba Science City, Japan, 123-130pp AND Wind Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 31st. Technical Memorandum of PWRI 3653. Proceedings. May 11-14, 1999, Tsukuba, Japan, 71-78 pp, 1999, 1999.
  Phan, L. T.; Simiu, E.
• Full-Scale Measurement of Building Response to Ambient Vibration and the Loma Prieta Earthquake.
  Earthquake Engineering Research Institute. Earthquake Awareness and Mitigation Across the Nation. U.S. National Conference, Fifth (5th). Proceedings. Volume 2. July 10-14, 1994, Chicago, IL, 661-670 pp, 1994.
  Marshall, R. D.; Phan, L. T.; Celebi, M.
• Fundamental Aspects of the Application of Carbon Dioxide in Comfort Cooling.
  ICR0100;Refrigeration International Congress, 21st IIR. (IRC2003).Technical Session: B1-9 - A New Old Refrigerant: Carbon Dioxide - Components and Systems I. Proceedings. August 17-22, 2003, Washington, DC, 2004.
  Brown, J. S.; Domanski, P. A.
• Further Progress in the Development of a Slug Calorimeter for Evaluating the Apparent Thermal Conductivity of Fire Resistive Materials.
  International Thermal Conductivity 29th Conference/International Thermal Expansion 17th Symposium. Proceedings. Chapter 8: Experimental Materials. June 24-27, 2007, Birmingham, AL, DEStech Publications, Inc., Koenig, J. R.; Ban, H., Editor(s)(s), 403-411 pp, 2007.
  Bentz, D. P.; Gaal, P. S.; Gaal, D. S.
• FutureHome: A Prototype for Factory Housing.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 173-178 pp, 2002.
  Wing, R.; Atkin, B.

G

• General Buildings Information Handover Guide: Principles, Methodology and Case Studies.
  NISTIR 7417; 99 p. August 2007.
  Fallon, K. K.; Palmer, M. E.
• Generalized Pressure Drop Correlation for Evaporation and Condensation in Smooth and Micro-Fin Tubes.
  Thermophysical Properties and Transfer Processes of New Refrigerants. IIR (International Institute of Refrigeration) Commission B1 Conference. Proceedings. October 2-5, 2001, Paderborn, Germany, B/4.9-B/4.16 pp, 2001.
  Choi, J. Y.; Kedzierski, M. A.; Domanski, P. A.
• Generalized Pressure Drop Correlation for Evaporation and Condensation of Alternative Refrigerants in Smooth and Micro-Fin Tube.
  NISTIR 6333; 67 p. October 1999.
  Choi, J. Y.; Kedzierski, M. A.; Domanski, P. A.
• Generating and Maintaining Activity-Based Cost Estimates With Feature-Based Product Models.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 287-292 pp, 2002.
  Staub-French, S.; Fischer, M.
• Genetic Algorithms for Accessing Engineering Performance.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 185-190 pp, 2002.
  Chang, L. M.; Zhang, L.
• Geometrical Percolation Threshold of Overlapping Ellipsoids.
  Physical Review E, Vol. 52, No. 1, 819-828, July 1995.
  Garboczi, E. J.; Snyder, K. A.; Douglas, J. F.; Thorpe, M. F.
• Geospatial Analysis Support to Natural Disasters.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 350-375 pp, 1998.
  Roper, W. E.
• GIS With Mobile Communication for Countermeasure Against Natural Disaster.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 502-505 pp, 1998.
  Takayama, N.
• Glide Matching With Binary and Ternary Zeotropic Refrigerant Mixtures. Part 1. An Experimental Study.
  International Journal of Refrigeration, Vol. 17, No. 4, 220-225, 1994.
  Mulroy, W. J.; Domanski, P. A.; Didion, D. A.
• Glide Matching With Binary and Ternary Zeotropic Refrigerant Mixtures. Part 2. A Computer Simulation.
  International Journal of Refrigeration, Vol. 17, No. 4, 226-230, 1994.
  Domanski, P. A.; Mulroy, W. J.; Didion, D. A.
• Government and Industry Working Together.
  Construction Business Review, Vol. 5, No. 1, 44-49, January/February 1995.
  Wright, R. N.
• GPS-Based Wireless Collision Detection of Construction Equipment.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 461-466 pp, 2002.
  Oloufa, A. A.; Ikeda, M.; Oda, H.
• GPS Monitoring of Structures: Recent Advances.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 515-528 pp, 1998.
  Celebi, M.; Prescott, W.; Stein, R.; Hudnut, K.; Behr, J.; Wilson, S.
• Graphical Analysis of the CCRL Portland Cement Proficiency Sample Database (Samples 1-72).
  NISTIR 5387; 123 p. March 1994.
  Spring, C. B.; Pielert, J. H.; Leigh, S.; Heckert, N. A.
• Ground Improvement Techniques for Liquefaction Remediation Near Existing Lifelines.
  NISTIR 5714; 87 p. October 1995.
  Andrus, R. D.; Chung, R. M.
• Group 1 for the Plant Spatial Configuration STEP Application Protocol.
  NISTIR 5675; 198 p. June 1995.
  Kline, S. W.; Palmer, M. E.; Burkett, W.; Skeels, J. A.
• Group 1 for the Process Engineering Data STEP Application Protocol.
  NISTIR 5909; 655 p. October 1996.
  Kline, S. W.; Palmer, M. E.; Appel, N.; Gilbert, M.
• GSA Guide to Specifying Interoperable Building Automation and Control Systems Using ANSI/ASHRAE Standard 135-1995, BACnet.
  NISTIR 6392; 79 p. November 1999.
  Bushby, S. T.; Newman, H. M.; Applebaum, M. A.
• Guide and Criteria for Training FEMP-Qualified Life-Cycle Cost Instructors.
  NISTIR 6258; 30 p. September 1998.
  Fuller, S. K.
• Guide for Estimating and Reporting the Macroeconomic Impacts of MEP Centers.
  NISTIR 6499; 53 p. May 2000.
  Ehlen, M. A.; Brown, M. H.
• Guide for X-Ray Powder Diffraction Analysis of Portland Cement and Clinker.
  NISTIR 5755; 43 p. March 1996.
  Stutzman, P. E.
• Guidelines and Procedures for Implementation of the Executive Order on Seismic Safety of New Construction.
  NISTIR 4852; ICSSSC RP 2.1-A; 26 p. June 1992.
  Todd, D. R.; Bieniawski, A. S.
• Guidelines for Planning and Development of Software for Buildings and Building Systems.
  NISTIR 7499; 71 p. June 2008.
  Lavappa, P. D.
• Guidelines for Pre-Qualification, Prototype and Quality Control Testing of Seismic Isolation Systems.
  NISTIR 5800; 143 p. January 1996.
  Shenton, H. W., III
• Guidelines for Stair Safety. Final Report.
  NBS BSS 120; 129 p. May 1979.
  Archea, J.; Collins, B. L.; Stahl, F. I.
• Guidelines for Testing Passive Energy Dissipation Devices.
  U.S./Japan Bridge Engineering Workshop, 15th. Proceedings. November 1999, Tsukuba City, Japan, 1999.
  Riley, M. A.; Sadek, F.; Mohraz, B.
• Guide to a Format for Data on Chemical Admixtures in a Materials Property Database.
  NISTIR 5796; 28 p. April 1996.
  Ferraris, C. F.
• Guide to Improved Earthquake Performance of Electric Power Systems.
  NIST GCR 98-757; 323 p. September 1998.
  Schiff, A. J.
• Guide to Printed and Electronic Resources for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities.
  NISTIR 7390; 156 p. February 2007.
  Chapman, R. E.; Thomas, D. S.
• Guide to Rheological Nomenclature: Measurements in Ceramic Particulate Systems.
  NIST SP 946; 35 p. January 2001.
  Hackley, V. A.; Ferraris, C. F.
• Guide to Rheological Nomenclature: Measurements in Ceramic Particulate Systems.
  NIST SP 946; 35 p. January 2001.
  Hackley, V. A.; Ferraris, C. F.
• Guide to Using CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modelling Package.
  NISTIR 5977; 146 p. February 1997.
  Bentz, D. P.
• Gust Speeds in Hurricanes.
  American Society of Civil Engineers (ASCI). Structures Congress XII. Volume 2. April 24-28, 1994, Atlanta, GA, American Society of Civil Engineers, New York, NY, Baker, N. C.; Goodno, B. J., Editor(s)(s), 1457-1462 pp, 1994.
  Marshall, R. D.

H

• Hard Core/Soft Shell Microstructural Model for Studying Percolation and Transport in Three-Dimensional Composite Media.
  NISTIR 6265; 55 p. January 1999.
  Bentz, D. P.; Garboczi, E. J.; Snyder, K. A.
• Heat and Moisture Transfer in Wood-Based Wall Construction: Measured Versus Predicted.
  NIST BSS 173; 83 p. February 1995.
  Zarr, R. R.; Burch, D. M.; Fanney, A. H.
• Heating, Spalling Characteristics and Residual Properties of High Performance Concrete.
  NISTIR 6588; November 2000.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 15th Joint Panel Meeting. Volume 2. Proceedings. March 1-7, 2000, San Antonio, TX, Bryner, S. L., Editor(s), 389-398 pp, 2000.
  Phan, L. T.; Lawson, J. R.; Davis, F. L.
• Heat Pump Cycles With Nonazeotropic Refrigerant Mixutres in Thermodynamic Diagrams.
  No. 2836;ASHRAE Transactions, Vol. 90, No. 2, 1984.
  Radermacher, R.
• Hidden Meaning of Water-Cement Ratio.
  Concrete International, Vol. 30, No. 5, 51-54, May 2008.
  Bentz, D. P.; Aitcin, P. C.
• Hierarchical Rule-Based Fault Detection and Diagnostic Method for HVAC Systems.
  HVAC&R Research, Vol. 12, No. 1, 111-125, January 2006.
  Schein, J.; Bushby, S. T.
• High-Strength Concrete at High Temperature: An Overview.
  Utilization of High Strength/High Performance Concrete, 6th International Symposium. Proceedings. Volume 1. June 2002, Leipzig, Germany, Konig, G.; Dehn, F.; Faust, T., Editor(s)(s), 501-518 pp, 2002.
  Phan, L. T.
• High-Temperature Guarded Hot Plate Apparatus: Control of Edge Heat Loss.
  International Thermal Conductivity 28th Conference/International Thermal Expansion 16th Symposium. Proceedings. June 26-29, 2005, New Brunswick, Canada, DEStech Publications, Inc., Dinwiddie, R.; White, M. A.; McElroy, D. L., Editor(s)(s), 208-223 pp, 2005.
  Flynn, D. R.; Healy, W. M.; Zarr, R. R.
• High-Temperature Guarded Hot Plate Apparatus: Optimal Locations of Circular Heaters.
  International Thermal Conductivity 28th Conference/International Thermal Expansion 16th Symposium. Proceedings. June 26-29, 2005, New Brunswick, Canada, DEStech Publications, Inc., Dinwiddie, R.; White, M. A.; McElroy, D. L., Editor(s)(s), 466-477 pp, 2005.
  Flynn, D. R.; Healy, W. M.; Zarr, R. R.
• Highway Bridge Seismic Design: How Current Research May Affect Future Design Practice.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 248-259 pp, 1998.
  Friedland, I. M.; Yen, W. P.; Mayes, R. L.; O'Fallon, J.
• Highway Concrete (HWYCON) Expert System in the Classroom.
  University of Cincinnati. Teaching the Materials Science, Engineering, and Field Aspects of Concrete. 3rd Annual Undergraduate Faculty Enhancement Symposium. Proceedings. July 9-12, 1995, Cincinnati, OH, 7-14 pp, 1995.
  Kaetzel, L. J.; Struble, L. S.
• HIST 1.0: Decision Support Software for Rating Buildings by Historic Significance.
  NISTIR 5683; 30 p. October 1995.
  Lippiatt, B. C.; Weber, S. F.
• History of Testing Heat Insulators at the National Institute of Standards and Technology.
  ASHRAE Transactions, Vol. 107, No. 2, 1-11, June 2001.
  Zarr, R. R.
• H Nuclear Magnetic Resonance Characterization of Portland Cement: Molecular Diffusion of Water Studied by Spin Relaxation and Relaxation Time-Weighted Imaging.
  Journal of Material Science, Vol. 33, 3065-3071, 1998.
  Wang, P. S.; Ferguson, M. M.; Eng, G.; Bentz, D. P.; Ferraris, C. F.; Clifton, J. R.
• Hole Growth Instability in the Dewetting of Evaporating Polymer Solution Films.
  Journal of Polymer Science: Part B: Polymer Physics, Vol. 40, No. 24, 2825-2832, December 15, 2002.
  Gu, X.; Raghavan, D.; Douglas, J. F.; Karim, A.
• Horizontal Convective Condensation of Alternative Refrigerants Within a Micro-Fin Tube.
  NISTIR 6095; 75 p. December 1997.Enhanced Heat Transfer, Vol. 6, 161-178, 1999.
  Kedzierski, M. A.; Goncalves, J. M.
• Horizontal Convective Condensation of Alternative Refrigerants Within a Micro-Fin Tube.
  NISTIR 6095; 75 p. December 1997.Enhanced Heat Transfer, Vol. 6, 161-178, 1999.
  Kedzierski, M. A.; Goncalves, J. M.
• Horizontal Flow Boiling of Alternative Refrigerants Within a Fluid Heated Micro-Fin Tube.
  Process, Enhanced, and Multiphase Heat Transfer. "A Symposium in Honor of Professor Arthur E. Bergles." Proceedings. Georgia Institute of Technology. November 16, 1996, Begell House, Inc., New York, NY, Manglik, R. M.; Kraus, A. D., Editor(s)(s), 167-173 pp, 1996.
  Kaul, M. P.; Kedzierski, M. A.; Didion, D. A.
• Horizontal Flow Boiling of Single Component and Binary Refrigerant Mixtures.
  ER-8006-2; Research Project 2792-09; 106 p. 1993.
  Kedzierski, M. A.; Didion, D. A.
• Horizontal Nucleate Flow Boiling Heat Transfer Coefficient Measurements and Visual Observations for R12, R134a, and R134a/Ester Lubricant Mixtures.
  NISTIR 5144; 31 p. March 1993.Korean Society of Mechanical Engineers. Symposium on Transport Phenomena (ISTP-6) in Thermal Engineering, 6th International. Volume 1. May 9-13, 1993, Seoul, Korea, Lee, J. S.; Chung, S. H.; Kim, K. H., Editor(s)(s), 111-116 pp, 1993.
  Kedzierski, M. A.; Kaul, M. P.
• How-To Suggestions for Implementing Executive Order 12941 on Seismic Safety of Existing Federal Buildings: A Handbook.
  NISTIR 5770; ICSSC TR-17; 201 p. November 1995.
  Bieniawski, A. S.; Todd, D. R.
• Human-Assisted Object Fitting to Sparse Range Point Clouds for Rapid Workspace Modeling in Construction Automation.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 357-363 pp, 2002.
  Kwon, S. W.; Liapi, K. A.; Haas, C. T.; Sreenivasan, S. V.; McLaughlin, J. T.
• Hurricane Damage Prediction Model for Residential Structures.
  Journal of Structural Engineering, Vol. 130, No. 11, 1685-1691, November 2004.
  Pnelli, J. P.; Simiu, E.; Gurley, K.; Subramanian, C.; Zhang, L.; Cope, A.; Filliben, J. J.; Hamid, S.
• Hurricane Fran in North Carolina, September 5-6, 1996.
  NIST GCR 98-734; 56 p. January 1998.
  Marshall, R. D.
• Hurricane Marilyn in the Caribbean: Measured Wind Speeds and Design Wind Speeds Compared.
  NISTIR 5987; 52 p. March 1997.
  Marshall, R. D.; Schroeder, J. L.
• HVACSIM+ User's Guide Update.
  NISTIR 7514; 108 p. July 2008.
  Park, C.
• Hybrid Reinforced Precast Frame for Seismic Regions.
  PCI Journal, Vol. 42, No. 2, 20-32, March/April 1997.
  Stanton, J.; Stone, W. C.; Cheok, G. S.
• Hydration of Portland Cement: The Effects of Curing Conditions.
  International Congress on the Chemistry of Cement, 10th Proceedings. Volume 2. June 1997, Sweden, 1997.
  Bentz, D. P.; Snyder, K. A.; Stutzman, P. E.
• Hygroscopic Stress and Failure of Coating/Metal Systems.
  Paint, Varnish, Ink and Adhesive Industry. Eurocoat Congress, 1996. September 1996, Italy, 1-17 pp, 1996.
  Perera, D. Y.; Nguyen, T.

I

• ICSSC Guidance on Implementing Executive Order 12941 on Seismic Safety of Existing Federally Owned or Leased Buildings.
  NISTIR 5734; 27 p. October 1995.
  Todd, D. R.; Bieniawski, A. S.
• Immersive Virtual Reality for Steel Structures.
  Referenced Paper No. 7;CONVR 2003. Conference on Construction Applications of Virtual Reality. Proceedings. September 24-26, 2003, Blacksburg, VA, 1-12 pp, 2003.
  Lipman, R. R.
• Impact-Echo Method: An Overview.
  Structures Congress and Exposition 2001. Proceedings. American Society of Civil Engineers. May 21-23, 2001, Washington, DC, Chang, P. C., Editor(s), 1-18 pp, 2001.
  Carino, N. J.
• Impact of Air and Refrigerant Maldistributions On the Performance of Finned-Tube Evaporators With R-22 and R-407C.
  DOE/CE/23810-81; Final Report; 38 p. July 1997.
  Lee, J.; Domanski, P. A.
• Impact of ASTM Standards and Government Regulations for Asbestos and Lead on the Renovation of Buildings.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 1. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Institute, Haifa, Israel, Becker, R.; Paciuk, M., Editor(s)(s), 3/79-89 pp, 1996.
  Friedman, W.; McKnight, M. E.; Oberta, A. F.
• Impact of Elevated Ambient Temperatures on Capacity and Energy Input to a Vapor Compression System: Literature Review. Letter Report.
  Letter Report for ARTI 21-CR; Research Project 605-50010/605-50015; 9 p. 2000.
  Motta, S. F. Y.; Domanski, P. A.
• Impact of Natural Ventilation Strategies and Design Issues for California Applications, Including Input to ASHRAE Standard 62 and California Title 24.
  NISTIR 7062; 26 p. October 2003.
  Emmerich, S. J.; Persily, A. K.; Dols, W. S.; Axley, J. W.
• Impact of Ozone-Safe Refrigerants on Refrigeration Machinery Performance and Operation.
  Society of Naval Architects and Marine Engineers. Transaction of naval Architects and Marine Engineering. November 1994, 10/1-15 pp, 1994.
  Didion, D. A.
• Impacts of Design/Information Technology on Building and Industrial Projects.
  NIST GCR 01-828; 46 p. October 2001.
  Thomas, S. R.; Macken, C. L.; Lee, S. H.
• Impacts of Design/Information Technology on Project Outcomes.
  NIST GCR 99-786; 46 p. Januray 2000.
  Thomas, S. R.
• Impedance/Dielectric Spectroscopy of Electroceramics in the Nanograin Regime.
  Solid-State Ionics 2002. Materials Research Society Fall Meeting. Proceedings. Volume 756. 2002, Boston, MA, EE4.6.1-12 pp, 2002.
  Kidner, N. J.; Ingram, B. J.; Homrighaus, Z. J.; Mason, T. O.; Garboczi, E. J.
• Impedance Spectra of Fiber-Reinforced Cement-Based Composites: A Modeling Approach.
  Cement and Concrete Research, Vol. 30, No. 4, 585-592, April 2000.
  Garboczi, E. J.; Torrents, J. M.; Mason, T. O.
• Implications for Earthquake Risk Reduction in the United States From the Kocaeli, Turkey, Earthquake on August 17, 1999.
  U.S. Geological Survey Circular 1193; 69 p. 2000.
  Holzer, T. L.; Barka, A. A.; Carver, D.; Celebi, M.; Cranswick, E.; Dawson, T.; Dieterich, J. H.; Ellsworth, W. L.; Fumal, T.; Gross, J. L.; Lamgride, R.; Lettis, W. R.; Meremonte, M.; Mueller, C.; Olsen, R. S.; Ozel, O.; Parsons, T.; Phan, L. T.; Rockwell, T.; Safak, E.; Stein, R. S.; Stenner, H.; Toda, S.; Toprak, S.
• Importance of Including the Liquid Phase in Equations of State for Nonazeotropic Refrigerant Mixtures.
  CH-85-05 No. 3;ASHRAE Transactions, Vol. 91, No. 1B, 260-273, January 1985.
  Morrison, G.
• Improved Approximation of the Brinkman Equation Using a Lattice Boltzmann Method.
  Physics of Fluids, Vol. 13, No. 6, 1807-1810, June 2001.
  Martys, N. S.
• Improved Correlation for Two-Phase Pressure Drop of R-22 and R-410A in 180DG Return Bends.
  CIT06-1051;Brazilian Congress of Thermal Sciences and Engineering, 11th Proceedings. ENCIT 2006 Brazilian Society of Mechanical Sciences and Engineering--ABCM. Session 3: Refrigerating, Ventilation and Air Conditioning. December 5-8, 2006, Curitiba, Brazil, 1-9 pp, 2006.
  Domanski, P. A.; Hermes, C. J. L.
• Improved Correlation for Two-Phase Pressure Drop of R-22 and R-410A in 180DG Return Bends.
  Thermal Sciences and Engineering, 11th Brazilian Congress. ENCIT 2006--ABCM. Proceedings. December 5-8, 2006, Curitiba, Brazil, 2006.
  Domanski, P. A.; Hermes, C. J. L.
• Improved Model for Simulating Impedance Spectroscopy.
  Computational Materials Science, Vol. 3, 465-474, 1995.
  Coverdale, R. T.; Jennings, H. M.; Garboczi, E. J.
• Improved Two-Phase Pressure Drop Correlation for 180DG Return Bends.
  Asian Conference on Refrigeration and Air-Conditioning, 3rd. Proceedings. May 21-23, 2006, Gyeongju, Korea, 1-4 pp, 2006.
  Domanski, P. A.; Hermes, C. J. L.
• Improving the Evaluation of Building Ventilation.
  95-TA33A.05;Air and Waste Management Association. Annual Meeting and Exhibition, 88th. Proceedings. June 18-23, 1995, San Antonio, TX, 1995.
  Persily, A. K.
• Incorporation of Fly Ash Into a 3-D Cement Hydration Microstructure Model.
  NISTIR 6050; 54 p. August 1997.
  Bentz, D. P.; Remond, S.
• Indoor Air Quality Commissioning of a New Office Building.
  NISTIR 5586; 51 p. January 1995.American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). IAQ'95: Practical Engineering for IAQ. Proceedings. October 22-24, 1995, Denver, CO, 29-41 pp, 1995 AND National Conference on Building Commissioning, 3rd. Proceedings. May 1-5, 1995, Milwaukee, WI, 1-8 pp, 1995, 1995.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Indoor Air Quality Commissioning of a New Office Building.
  NISTIR 5586; 51 p. January 1995.American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). IAQ'95: Practical Engineering for IAQ. Proceedings. October 22-24, 1995, Denver, CO, 29-41 pp, 1995 AND National Conference on Building Commissioning, 3rd. Proceedings. May 1-5, 1995, Milwaukee, WI, 1-8 pp, 1995, 1995.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Indoor Air Quality Commissioning of a New Office Building.
  NISTIR 5586; 51 p. January 1995.American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). IAQ'95: Practical Engineering for IAQ. Proceedings. October 22-24, 1995, Denver, CO, 29-41 pp, 1995 AND National Conference on Building Commissioning, 3rd. Proceedings. May 1-5, 1995, Milwaukee, WI, 1-8 pp, 1995, 1995.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Indoor Air Quality Impacts of Residential HVAC Systems. Phase II.A Report: Baseline and Preliminary Simulations.
  NISTIR 5559; 77 p. January 1995.
  Emmerich, S. J.; Persily, A. K.
• Indoor Air Quality Impacts of Residential HVAC Systems. Phase II.B Report: IAQ Control Retrofit Simulations and Analysis.
  NISTIR 5712; 89 p. September 1995.
  Emmerich, S. J.; Persily, A. K.
• Indoor Air Quality Impacts of Residential HVAC Systems. Phase I Report. Computer Simulation Plan.
  NISTIR 5346; 117 p. February 1994.
  Emmerich, S. J.; Persily, A. K.
• Indoor Air Quality in Green Buildings: A Review and a Case Study.
  Paths to Better Building Environments/Environmental Effects on Health and Producitivity. IAQ '96 Conference. Proceedings. American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. (ASHRAE). October 6-8, 1996, Baltimore, MD, ASHRAE, Atlanta, GA, Teichman, K. Y., Editor(s), 139-150 pp, 1996.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Indoor Air Quality Performance Standard for Single-Family Residential Buildings.
  ISIAQ: Indoor Air 99 Conference. Volume 1. Proceedings. August 8-13, 1999, Edinburgh, Scotland, 194-199 pp, 1999.
  Persily, A. K.
• Indoor Air Quality Performance Standard for Single-Family Residential Buildings.
  ISIAQ: Indoor Air 99 Conference. Volume 1. Proceedings. August 8-13, 1999, Edinburgh, Scotland, 194-199 pp, 1999.
  Persily, A. K.
• Industry Perspective on Composite Retrofit Specifications.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/73-82 pp, 1999.
  Policelli, F.; Cercone, L.; Ma, G.; Johns, R.
• Inelastic Response of the Cypress Viaduct to the Loma Prieta Earthquake.
  Engineering Structures, Vol. 17, No. 7, 485-493, 1995.
  Kunnath, S. K.; Gross, J. L.
• Influence of Alkalis on Porosity Percolation in Hydrating Cement Pastes.
  Cement and Concrete Composites, Vol. 28, No. 5, 427-432, May 2006.
  Bentz, D. P.
• Influence of Anderson Localization on the Mode Decay of Excited Nonlinear Systems.
  Localization 1999: Disorder and Interaction in Transport Phenomena. Poster Contributions of the International Conference. Proceedings. July 29-August 3, 1999, Hamburg, Germany, 1999.Annalen der Physik, Vol. 8, No. Special Issue, SI/241-SI/244, 1999.ISSN ISSN 0003-3804
  Snyder, K. A.; Kirkpatrick, T. R.
• Influence of Calcium Hydroxide Dissolution on the Transport Properties of Hydrated Cement Systems.
  Calcium Hydroxide in Concrete: Materials Science of Concrete. Special Volume. Proceedings. Workshop on the Role of Calcium Hydroxide in Concrete. American Ceramic Society. November 1-3, 2000, Anna Maria Island, FL, 113-129 pp, 2001.
  Marchand, J.; Bentz, D. P.; Samson, E.; Maltais, Y.
• Influence of Cement Particle-Size Distribution on Early Age Autogenous Strains and Stresses in Cement-Based Materials.
  Journal of the American Ceramic Society, Vol. 84, No. 1, 129-135, January 2001.
  Bentz, D. P.; Jensen, O. M.; Hansen, K. K.; Olesen, J. F.; Stang, H.; Haecker, C. J.
• Influence of Concentration and Additives on R123/Paraffinic Material Oil Boiling Heat Transfer Performance.
  NISTIR 7336; 46 p. September 2006.
  Kedzierski, M. A.; Han, D. H.
• Influence of Concentration and Additives on R123/Paraffinic Material Oil Boiling Heat Transfer Performance.
  NISTIR 7336; 46 p. September 2006.
  Kedzierski, M. A.; Han, D. H.
• Influence of Confining Stress on Liquefaction Resistance.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 167-184 pp, 1998.
  Hynes, M. E.; Olsen, R. S.; Yule, D. E.
• Influence of Curing Conditions on Water Loss and Hydration in Cement Pastes With and Without Fly Ash Substitution.
  NISTIR 6886; 20 p. July 2002.
  Bentz, D. P.
• Influence of Measurement Technique on the Air-Void Structure of Hardened Concrete. Discussion by Ken Snyder.
  ACI Materials Journal, Vol. 93, 512-514, 1996.
  Aarre, T.
• Influence of Mineral Admixtures on the Rheology of Cement Paste and Concrete.
  Cement and Concrete Research, Vol. 31, No. 2, 245-255, 2001.
  Ferraris, C. F.; Obla, K. H.; Hill, R.
• Influence of Shrinkage-Reducing Admixtures on Early-Age Properties of Cement Pastes.
  Journal of Advanced Concrete Technology, Vol. 4, No. 3, 423-429, October 2006.
  Bentz, D. P.
• Influence of Silica Fume on Diffusivity in Cement-Based Materials. I. Experimental and Computer Modeling Studies on Cement Pastes.
  Cement and Concrete Research, Vol. 30, No. 6, 953-962, June 2000.
  Bentz, D. P.; Jensen, O. M.; Coats, A. M.; Glasser, F. P.
• Influence of Silica Fume on Diffusivity in Cement-Based Materials. II. Multi-Scale Modeling of Concrete Diffusivity.
  Cement and Concrete Research, Vol. 30, No. 7, 1121-1129, July 2000.
  Bentz, D. P.
• Influence of Silica Fume on the Stresses Generated by Alkali-Silica Reaction.
  Cement, Concrete, and Aggregates, Vol. 22, No. 1, 73-78, June 2000.
  Ferraris, C. F.; Garboczi, E. J.; Stutzman, P. E.; Winpigler, J. A.; Clifton, J. R.
• Influence of the Atmostphere on Curing Concrete Temperatures and Maturity.
  Advances in Cement and Concrete. Proceedings. Engineering Conferences International. August 10-14, 2003, Copper Mountain, CO, 491-500 pp, 2003.
  Wojcik, G. S.
• Influence of the Thermophysical Fluid Properties of the New Ozone-Safe Refrigerants on Performance.
  International Journal of Applied Thermodynamics, Vol. 2, No. 1, 19-35, March 1999.
  Didion, D. A.
• Influence of Water-to-Cement Ratio on Hydration Kinetics: Simple Models Based on Spatial Considerations.
  Cement and Concrete Research, Vol. 36, No. 2, 238-244, February 2006.
  Bentz, D. P.
• Information Model for Building Automation Systems.
  Automation in Construction, Vol. 16, No. 2, 125-139, March 2007.
  Schein, J.
• Initial Evaluation of Displacement Ventilation and Dedicated Outdoor Air Systems for U.S. Commercial Buildings.
  NISTIR 7244; 35 p. July 2005.
  Emmerich, S. J.; McDowell, T.
• Innovation in the Japanese Construction Industry: A 1995 Appraisal.
  NIST SP 898; 265 p. March 1996.
  Gann, R. G.; Anderson, T. L.; Bomba, S. J.; Cemenska, R. A.; DiTomas, E. E.; Duscha, L. A.; Ehrenkrantz, E.; Goldberg, B.; McGinnis, C. I.; Paulson, B. C., Jr.; Raufaste, N. J., Jr.; Reinschmidt, K. F.; Rosenfeld, A. H.
• Innovative Approach for Controlling Hysteretic Structures Using static Output Feedback H (inf) Algorithm and Stochastic.
  European Conference on Structural Control, 3rd World Conference. (3WCSC). Proceedings. April 7-11, 2002, Como, Italy, 1-6 pp, 2002.
  Sadek, F.; Ftima, M. B.; El-Borgi, S.; McCormick, J.; Riley, M. A.
• Input Data for Multizone Airflow and IAQ Analysis.
  NISTIR 6585; 36 p. January 2001.
  Persily, A. K.; Ivy, E. M.
• In-Situ Imaging of Chloride Ions at the Metal/Solution Interface by Scanning Combination Microelectrodes.
  Corrosion, Vol. 56, No. 1, 41-47, January 2000.
  Lin, C. J.; Du, R. G.; Nguyen, T.
• In-Situ Load Testing to Evaluate New Repair Techniques.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/102-112 pp, 1999.
  Gold, W. J.; Nanni, A.
• In Situ Measurement of Metal Ions at the Polymer/Substrate Interface Using Infrared-Active Sensors.
  Adhesion Society Meeting. February 1996, 453-455 pp, 1996.
  Nguyen, T.; Byrd, W. E.
• In-Situ Measurement of the Moisture Content of Building Materials Using Ultra-Wideband Radio Waves.
  NRCC-46103;Research in Building Physics and Building Engineering. Building Physics Conference, 3rd International. Proceedings. August 27-31, 2006, Montreal, Canada, Taylor and Francis/Balkema, Leiden, Netherlands, Editor(s), 173-180 pp, 2006.
  Healy, W. M.
• In Situ Measurement of Water at the Organic Coating/Substrate Interface.
  Progress in Organic Coatings, Vol. 27, 181-193, 1996.
  Nguyen, T.; Byrd, W. E.; Bentz, D. P.; Lin, C.
• In Situ Quasi-Elastic Neutron Scattering Study of the Hydration of Tricalcium Silicate.
  Chemistry of Materials, Vol. 10, 397-402, 1998.
  FitzGerald, S. A.; Neumann, D. A.; Rush, J. J.; Bentz, D. P.; Livingston, R. A.
• Integrating Fire Alarm Systems With Other Building Automation and Controls Systems.
  Fire Protection Engineering, No. 11, 5-11, Summer 2001.
  Bushby, S. T.
• Integrating Fire Systems With Other Building Automation and Control Systems.
  NISTIR 6588; November 2000.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 15th Joint Panel Meeting. Volume 2. Proceedings. March 1-7, 2000, San Antonio, TX, Bryner, S. L., Editor(s), 349-356 pp, 2000.
  Bushby, S. T.
• Integrating Sphere-Based Ultraviolet Exposure Chamber Design for Photodegradation of Polymeric Materials.
  Polymer Degradation and Stability, Vol. 63, 297-304, 1999.
  Martin, J. W.; Chin, J. W.; Byrd, W. E.; Embree, E. J.; Kraft, K. M.
• Integrating Sphere Sources for UV Exposure: A Novel Approach to the Artificial UV Weathering of Coatings, Plastics and Composites.
  Service Life Prediction: Methodology and Metrologies. Proceedings. American Chemical Society Symposium Series 805. 2002, American Chemical Society, Martin, J. W.; Bauer, D. R., Editor(s)(s), 144-160 pp, 2002.
  Chin, J. W.; Byrd, E.; Embree, E. J.; Martin, J. W.
• Integrating Sphere Sources for UV Exposure: A Novel Approach to the Artificial UV Weathering of Coatings, Plastics and Composites.
  Service Life Prediction: Methodology and Metrologies. Proceedings. American Chemical Society Symposium Series 805. 2002, American Chemical Society, Martin, J. W.; Bauer, D. R., Editor(s)(s), 144-160 pp, 2002.
  Chin, J. W.; Byrd, E.; Embree, E. J.; Martin, J. W.
• Integration of Airflow and Energy Simulation using CONTAM and TRNSYS.
  KC-03-10-2;ASHRAE Transactions 2003 Annual Meeting. Proceedings. 2003, Kansas City, MO, 1-14 pp, 2003.ASHRAE Transactions, Vol. 109, No. 1,
  McDowell, T. P.; Emmerich, S. J.; Thornton, J. W.; Walton, G. N.
• Intelligent Driving Control System: Automated Driving Management and Control System Using Optimum Control Theory.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 437-442 pp, 2002.
  Awata, T.; Yoshida, K.; Hino, H.
• Interaction of Lighting, Heating and Cooling Systems in Buildings.
  NISTIR 4701; 115 p. March 1992.
  Treado, S. J.; Bean, J. W.
• Interfacial Transport in Porous Media: Application to dc Electrical Conductivity of Mortars.
  Journal of Applied Physics, Vol. 78, No. 10, 5898-5908, November 15, 1995.
  Schwartz, L. M.; Garboczi, E. J.; Bentz, D. P.
• Interfacial Water and Adhesion Loss of Polymer Coatings on a Siliceous Substrate.
  Materials Research Society Symposium Proceedings. Volume 385. 1995, 57-63 pp, 1995.
  Nguyen, T.; Byrd, W. E.; Alsheh, D.; McDonough, W.; Seiler, J. F., Jr.
• Interfacial Zone Percolation in Concrete: Effects of Interfacial Zone Thickness and Aggregate Shape.
  Materials Research Society. Microstructure of Cement-Based Systems/Bonding and Interfaces in Cemetitious Materials. Materials Research Society Symposium Proceedings Volume 370. November 28-December 1, 1994, Boston, MA, Materials Research Society, Pittsburgh, PA, Diamond, S.; Mindess, S.; Glasser, F. P.; Roberts, L. W., Editor(s)(s), 437-442 pp, 1995.
  Bentz, D. P.; Hwang, J. T. G.; Hagwood, C.; Garboczi, E. J.; Snyder, K. A.; Buenfeld, N.; Scrivener, K. L.
• Interlaboratory "Pilot Run" Study of Small Heat-Flow-Meter Apparatus for ASTM C518.
  Journal of Testing and Evaluation, Vol. 27, No. 6, 357-367, November 1999.
  Zarr, R. R.; Lagergren, E. S.
• Intermediate Model for Interoperation of Web-Distributed Applications With a Design Model.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 18-42 pp, 1999.
  Arnold, J. A.
• International Comparison of Guarded Hot Plate Apparatus Using National and Regional Reference Materials.
  NIST TN 1444; 87 p. May 2002.
  Zarr, R. R.; Filliben, J. J.
• International Responses to Pacific Tsunami Warnings and Watches.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 33-37 pp, 1998.
  Blackford, M. E.
• International Study of Guarded Hot Plate Laboratories Using Fibrous Glass and Expanded Polystyrene Reference Materials.
  Insulation Materials: Testing and Applications. Volume 4. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 3-16 pp, 2003.
  Zarr, R. R.; Filliben, J. J.
• International Study of Guarded Hot Plate Laboratories Using Fibrous Glass and Expanded Polystyrene Reference Materials.
  Insulation Materials: Testing and Applications. Volume 4. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 3-16 pp, 2003.
  Zarr, R. R.; Filliben, J. J.
• International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002.
  NIST SP 989; 557 p. September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 2002.
  Stone, W. C.
• International Workshop on Fire Performance of High-Strength Concrete, NIST, Gaithersburg, MD, February 13-14, 1997.
  NIST SP 919; 174 p. September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 1997.
  Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E. J.
• Interplay of Capillary and Elastic Driving Forces During Microstructural Evolution: Applications of a Digital Image Model.
  Journal of Applied Physics, Vol. 83, No. 8, 4477-4486, April 15, 1998.
  Bullard, J. W.; Garboczi, E. J.; Carter, W. C.
• Interpretation of the Impedance Spectroscopy of Cement Paste Via Computer Modelling.
  Journal of Materials Science, Vol. 30, 5078-5086, 1995.
  Olson, R. A.; Christensen, B. J.; Coverdale, R. T.; Ford, S. J.; Moss, G. M.; Jennings, H. M.; Mason, T. O.; Garboczi, E. J.
• Interpretation of the Impedance Spectroscopy of Cement Paste Via Computer Modelling. Part 1. Bulk Conductivity and Offset Resistance.
  Journal of Materials Science, Vol. 30, 712-719, 1995.
  Coverdale, R. T.; Christensen, B. J.; Jennings, H. M.; Mason, T. O.; Bentz, D. P.; Garboczi, E. J.
• Intracycle Evaporative Cooling in a Vapor Compression Cycle.
  NISTIR 5873; 25 p. September 1996.
  Kim, B. S.; Domanski, P. A.
• Intrinsic Conductivity of Objects Having Arbitrary Shape and Conductivity.
  Physical Review E, Vol. 53, No. 6, 6169-6180, June 1996.
  Garboczi, E. J.; Douglas, J. F.
• Intrinsic Conductivity of Short Conductive Fibers in Composites by Impedance Spectroscopy.
  Journal of Electroceramics, Vol. 7, 189-195, 2001.
  Hixson, A. D.; Woo, L. Y.; Campo, M. A.; Mason, T. O.; Garboczi, E. J.
• Intrinsic Viscosity and the Electric Polarizability of Arbitrarily Shaped Objects.
  Physical Review E, Vol. 64, No. 6, 61401-61416, December 2001.
  Mansfield, M. L.; Douglas, J. F.; Garboczi, E. J.
• Intrinsic Viscosity and the Polarizability of Particles Having a Wide Range of Shapes.
  Advances in Chemical Physics, Vol. XCI, 85-153, 1995.
  Douglas, J. F.; Garboczi, E. J.
• Introduction.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. November 9-10, 1998, 1-2 pp, 1999.
  Frohnsdorff, G. J. C.
• Introduction.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 1-5 pp, 1999.
  Kaetzel, L. J.
• Investigation of L'Ambiance Plaza Building Collapse.
  Journal of Performance of Constructed Facilities, Vol. 8, No. 2, 160-161, May 1994.
  Culver, C. G.; Marshall, R. D.; Rendon-Herrero, O.
• Investigation of Morphology and Interface in Polymer Composite Thin Films.
  Electronic, Optical and Optoelectronic Polymers and Oligomers. Materials Research Society Symposium. Volume 665. Symposium C. Proceedings. 2001, Jabbour, G. E.; Meijer, B.; Sariciftci, N. S., Editor(s)(s), C5.27.1-5 pp, 2001.
  Chiang, C. K.; Sung, L. P.; Popielarz, R.
• Investigation of the Degradation of Aqueous Ethylene Glycol and Propylene Glycol Solutions Using Ion Chromatography.
  Solar Energy Materials, Vol. 11, 455-467, 1985.
  Rossiter, W. J., Jr.; Godette, M.; Brown, P. W.; Galuk, K. G.
• Investigation of the Impact of Commercial Building Envelope Airtightness on HVAC Energy Use.
  NISTIR 7238; 48 p. June 2005.
  Emmerich, S. J.; McDowell, T.; Anis, W.
• Investigation of the Kansas City Hyatt Regency Walkways Collapse. Building Science Series (Final).
  NBS BSS 143; May 1982.
  Marshall, R. D.; Pfrang, E. O.; Leyendecker, E. V.; Woodward, K. A.; Reed, R. P.; Kasen, M. B.; Shives, T. R.
• Investigation of the Part-Load Performance of an Absorption Chiller.
  No. 2749;ASHRAE Transactions, Vol. 89, No. 1, 1983.
  Radermacher, R.; Klien, S. A.; Didion, D. A.
• Investigation of the Relationship Between Microstructure and Appearance Properties of Coating Materials.
  Annual Meeting, 78th. Federation of Societies for Coatings Technology Meeting Technical Program. Federation of Societies for Coatings Technology (FSCT) Meeting. Proceedings. October 18-20, 2000, Chicago, IL, Federation of Societies for Coatings Technology, Blue Bell, PA, Gilicinski, A. G., Editor(s), 1-8 pp, 2001.
  Sung, L. P.; Nadal, M. E.; McKnight, M. E.; Nguyen, J. V.; Lin, C. J.
• Investigation of the Relationship Between Microstructure and Appearance Properties of Coating Materials.
  Annual Meeting, 78th. Federation of Societies for Coatings Technology Meeting Technical Program. Federation of Societies for Coatings Technology (FSCT) Meeting. Proceedings. October 18-20, 2000, Chicago, IL, Federation of Societies for Coatings Technology, Blue Bell, PA, Gilicinski, A. G., Editor(s), 1-8 pp, 2001.
  Sung, L. P.; Nadal, M. E.; McKnight, M. E.; Nguyen, J. V.; Lin, C. J.
• Issues in the Field Measurement of VOC Emission Rates.
  Indoor Air Quality and Climate, 7th International Conference. Proceedings. Indoor Air '96. Volume 2. July 21-28, 1996, Nagoya, Japan, 49-54 pp, 1996.
  Persily, A. K.

J

• January 17, 1994, Northridge Earthquake, California.
  NIST SP 871; September 1994.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 26th. May 17-20, 1994, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 375-426 pp, 1994.
  Lew, H. S.; Cooper, J. D.; Hacopian, S.; Hays, W.; Mahoney, M.
• January 17, 1995 Hyogoken-Nanbu (Kobe) Earthquake: Performance of Structures, Lifelines, and Fire Protection Systems.
  NIST SP 901; ISCCS TR18; 573 p. July 1996.
  Chung, R. M.; Ballantyne, D. B.; Comeau, E.; Holzer, T. L.; Madrzykowski, D.; Schiff, A. J.; Stone, W. C.; Wilcoski, J.; Borcherdt, R. D.; Cooper, J. D.; Lew, H. S.; Moehle, J.; Sheng, L. H.; Taylor, A. W.; Bucker, I.; Hayes, J.; Leyendecker, E. V.; O'Rourke, T.; Singh, M. P.; Whitney, M.
• Jess and Knowledge Sharing Considerations and Issues.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 43-47 pp, 1999.
  Labrou, Y.; Finin, T.
• Just-In-Time Continuous Flight Auger Piles Using an Instrumented Auger.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 455-460 pp, 2002.
  Mure, N.; Scott, J. N.; Seward, D. W.; Quayle, S. D.; Clayton, C. R. I.; Rust, M.

K

• Kinetics of the Reaction of Calcium Hydroxide and Fly Ash.
  Title No. 98-M37;ACI Materials Journal, Vol. 98, No. 4, 340-349, July/August 2001.
  Biernacki, J. J.; Williams, P. J.; Stutzman, P. E.
• Knowledge-Based Systems and Computational Tools for Concrete.
  Concrete International, 24-27, December 2000.
  Garboczi, E. J.; Bentz, D. P.; Frohnsdorff, G. J. C.
• Knowledge for the Coatings Industry: Needs and Progress.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 48-57 pp, 1999.
  Appleman, B. R.

L

• Laboratory Accreditation and the Quality of Testing of Construction Materials Used in Transportation Systems.
  Quality Assurance: A National Commitment Conference. Proceedings. American Society of Civil Engineers (ASCE). October 1997, Reston, VA, 71-80 pp, 1997.
  Pielert, J. H.
• Laboratory Apparatus and Cumulative Damage Model for Linking Field and Laboratory Exposure Results.
  Service Life Prediction: Methodology and Metrologies. Proceedings. American Chemical Society Symposium Series 805. 2002, American Chemical Society, Martin, J. W.; Bauer, D. R., Editor(s)(s), 119-143 pp, 2002.
  Martin, J. W.; Nguyen, T.; Byrd, E.; Dickens, B.; Embree, N.
• Ladars for Construction Assessment and Update.
  Automation in Construction, Vol. 9, No. 5, 463-477, 2000.
  Cheok, G. S.; Stone, W. C.; Lipman, R. R.; Witzgall, C.
• Large Scale Simulations of Single and Multi-Component Flow in Porous Media.
  Developments in X-Ray Tomography II. Proceedings. SPIE: The International Society for Optical Engineering. SPIE Volume 3772. July 22-23, 1999, Denver, CO, 205-213 pp, 1999.
  Martys, N. S.; Hagedorn, J. G.; Goujon, D.; Devaney, J. E.
• La Rheologie des Materiaux Cimentaires. [The Rheology of Cementitious Materials].
  Ciments, Betons, Platres, Chaux, Vol. 867, 48-55, 2004.
  Flatt, R. J.; Martys, N. S.; Bergstrom, L.
• Laser Scanning for Construction Metrology.
  Paper 082;Robotics and Remote Systems, 9th International Topical Meeting. Proceedings. American Nuclear Society. Paper 082. March 4-8, 2001, Seattle, WA, 1-9 pp, 2001.
  Cheok, G. S.; Stone, W. C.; Lipman, R. R.; Witzgall, C.; Bernal, J.
• Life-Cycle Computer-Aided Data Project.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 65-65 pp, 1999.
  Humphreys, K.
• Life-Cycle Costing Manual for the Federal Energy Management Program. 1995 Edition.
  NIST Handbook 135; 1995 Edition; 210 p. February 1996.
  Fuller, S. K.; Petersen, S. R.
• Life-Cycle Costing.
  Mechanical Estimating Guidebook. Chapter 27. Sixth (6th) Edition, McGraw-Hill, Inc., New York, NY, Gladstone, J.; Humphreys, K. K., Editor(s), 407-417 p., 1995.
  Marshall, H. E.; Petersen, S. R.
• Life-Cycle Costing Workshop for Energy Conservation in Buildings: Student Manual.
  NISTIR 5165-00; 244 p. April 2000.
  Fuller, S. K.; Boyles, A. S.
• Life-Cycle Costing Workshop for Energy Conservation in Buildings: Student Manual.
  NISTIR 5165-98; 200 p. April 1998.
  Fuller, S. K.; Petersen, S. R.
• Life-Cycle Costing Workshop for Energy Conservation in Buildings: Student Manual.
  NISTIR 5165-96; 233 p. October 1995.
  Fuller, S. K.; Petersen, S. R.
• Life-Cycle Costs of Fiber-Reinforced-Polymer Bridge Decks.
  Journal of Materials in Civil Engineering, Vol. 11, No. 3, 224-230, August 1999.
  Ehlen, M. A.
• Life-Cycle Costs of New Construction Materials.
  Journal of Infrastructure Systems, Vol. 3, No. 4, 129-133, December 1997.
  Ehlen, M. A.
• Lifelines and Control of Post Earthquake Fires.
  Common Agenda for Cooperation in Global Perspective. United States/Japan Earthquake Policy Symposium. Proceedings. September 16-18, 1996, Washington, DC, Federal Emergency Management Agency, Washington, DC, 157-164 pp, 1997.
  Wright, R. N.
• Light Structures Structures of Light: The Art and Engineering of Tensile Architecture by Horst Berger. Book Review.
  Journal of Architectural Engineering, 54, March 1997.
  Simiu, E.
• Limitation of Current U.S. Standards and Challenges of Proposed Performance-Based Standards.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B5. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 87-93 pp, 1997.
  Milke, J. A.
• Limiting Throttling Losses by Intracycle Evaporative Cooling.
  KSME-JSME Thermal Engineering, Third (3rd) Conference. Volume 3. October 20-23, 1996, Kyongju, Korea, 451-462 pp, 1996.
  Kim, B. S.; Domanski, P. A.
• Linear Elastic Properties of 2-D and 3-D Models of Porous Materials Made From Elongated Objects.
  Modeling and Simulation in Materials Science and Engineering, Vol. 9, 371-390, 2001.
  Meille, S.; Garboczi, E. J.
• Linear-Fit-Based Rating Procedure for Mixed Air-Source Unitary Air Conditioners and Heat Pumps Operating in the Cooling Mode.
  NISTIR 7325; 30 p. June 2006.
  Payne, W. V.; Domanski, P. A.
• Linear Static and Dynamic Procedures for Structures With Velocity-Dependent Supplemental Dampers.
  NISTIR 6329; 55 p. May 1999.
  Sadek, F.; Mohraz, B.; Riley, M. A.
• Line-Heat-Source Guarded-Hot-Plate Apparatus.
  ASTM Designation C1043; PCN 12-310430-61; 33 p. 1996.
  Zarr, R. R.; Hahn, M. H.
• Link Between Terminology and Data Element Dictionaries.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 6-17 pp, 1999.
  Wright, S. E.
• Liquefaction Evaluation of Densified Sand at Approach to Pier 1 on Treasure Island, California, Using SASW Method.
  NISTIR 6230; 80 p. October 1998.
  Andrus, R. D.; Stokoe, K. H., II; Chung, R. M.; Bay, J. A.
• Liquefaction Evaluation Procedure Based on Shear Wave Velocity.
  ISSD 0386-5878;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 31st. Technical Memorandum of PWRI 3653. Proceedings. May 11-14, 1999, Tsukuba, Japan, 469-474 pp, 1999.
  Andrus, R. D.; Stokoe, K. H., II
• Liquefaction Remediation Near Existing Lifeline Structures.
  Technical Report NCEER-96-0012; NCEER Task Number 95-2702A;Japan/U.S. Workshop on Earthquake Resistant Design of Lifeline Facilities and Countermeasures Against Soil Liquefaction, 6th Proceedings. National Center for Earthquake Engineering Research. June 11-13, 1996, Tokyo, Japan, National Center for Earthquake Engg. Res., NY, Hamada, M.; O'Rourke, T., Editor(s)(s), 457-476 pp, 1996.
  Andrus, R. D.; Chung, R. M.
• Liquefaction Resistance Based on Shear Wave Velocity.
  Evaluation of Liquefaction Resistance of Soils. National Center for Earthquake Engineering Research (NCEER) Workshop. Proceedings. January 5-6, 1996, Salt Lake, UT, Youd, T. L.; Idriss, I. M., Editor(s)(s), 89-128 pp, 1997.
  Andrus, R. D.; Stokoe, K. H., II
• Literature Review on CO2-Based Demand-Controlled Ventilation.
  ASHRAE Transactions, Vol. 103, No. 2, 1997.
  Emmerich, S. J.; Persily, A. K.
• Literature Review on Seismic Performance of Building Cladding Systems.
  NIST GCR 95-681; 179 p. February 1995.
  Cladding Research Institute
• Lithium, Potassium and Sodium Additions to Cement Pastes.
  Adances in Cement Research, Vol. 18, No. 2, 65-70, 2006.
  Bentz, D. P.
• Longitudinal Heat Conduction in Finned-Tube Evaporators.
  ARTI-21CR/605-5005-01;Refrigeration Creates the Future. International Congress of Refirgeration 2007, 22nd IIR. ICR 2007. August 21-26, 2007, Beijing, China, 1-8 pp, 2007.
  Domanski, P. A.; Choi, J. M.; Payne, W. V.
• Longitudinal Heat Conduction in Finned-Tube Evaporators.
  Advances in Air-to-Refrigerant Heat Exchangers. ASHRAE Winter Meeting. Seminar 1. January 24-28, 2009, Chicago, IL, 2009.
  Domanski, P. A.
• Long-Term Performance of Engineered Concrete Barriers.
  NISTIR 5690; 19 p. July 1995.
  Clifton, J. R.; Pommersheim, J. M.; Snyder, K. A.
• LoopDA: A Natural Ventiation System Design and Analysis Tool.
  Building Simulation 2003, 8th International Building Performance Simulation Association (IBPSA) Conference. Proceedings. August 11-14, 2003, Eindhoven, Netherlands, 291-298 pp, 2003.
  Emmerich, S. J.; Dols, W. S.
• LoopDA: Natural Ventilation Design and Analysis Software.
  NISTIR 6967; 36 p. April 2003.
  Dols, W. S.; Emmerich, S. J.
• Low-Cost Building/HVAC Emulator.
  HPAC Heating/Piping/Air-Conditioning, 188-193, January 1997.
  Decious, G. M.; Park, C.; Kelly, G. E.
• Low Cost Digital Vibration Meter.
  Journal of Research of the National Institute of Standards and Technology, Vol. 112, No. 2, 115-128, March/April 2007.
  Payne, W. V.; Geist, J.
• Low-Rise Steel Structures Under Directional Winds: Mean Recurrence Interval of Failure.
  Journal of Structural Engineering, Vol. 134, No. 8, 1383-1388, August 2008.
  Duthinh, D.; Main, J. A.; Wright, A. P.; Simiu, E.
• Low Temperature Calorimetry Studies of Hydrating Portland Cement Pastes.
  NISTIR 7267; 124 p. October 2005.
  Bentz, D. P.
• Lubbock Tornado: A Survey of Building Damage in an Urban Area. Technical Note.
  NBS TN 558; March 1971.
  Somes, N. F.; Dikkers, R. D.; Boone, T. H.

M

• Maintenance and Modifications to Structural Systems. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1C; 169 p. September 2005.
  Fanella, D. A.; Derecho, A. T.; Ghosh, S. K.
• Manual for Ventilation Assessment in Mechanically Ventilated Commercial Buildings.
  NISTIR 5329; 129 p. January 1994.
  Persily, A. K.
• Manual of Evaluation Procedures for Passive Fire Prevention Following Earthquakes.
  NIST GCR 99-768; 25 p. June 1999.
  Williamson, R. B.
• Manufactured Homes - Probability of Failure and the Need for Better Windstorm Protection Through Improved Anchoring Systems.
  NISTIR 5370; 54 p. November 1994.
  Marshall, R. D.
• Manufactured Housing Walls That Provide Satisfactory Moisture Performance in All Climates.
  NISTIR 5558; 33 p. January 1995.
  Burch, D. M.; Saunders, C. A.; TenWolde, A.
• Manufactured Housing Walls That Provide Satisfactory Moisture Performance in All Climates.
  International Building Performance Simulation Association. Building Simulation '95. Building Simulation Conference, 4th Proceedings. August 14-16, 1995, Madison, WI, Intl. Building Performance Simulation Assoc., Mitchell, J. W.; Beckman, W. A., Editor(s)(s), 22-33 pp, 1995.
  Burch, D. M.; TenWolde, A.
• Manufacturing Extension Partnerships for the Construction Industry.
  Construction Business Review, 1-6, 1996.
  Sunder, S. S.; Cranmer, D. C.; Korchak, R.
• Mapping Between the CIMSteel Integration Standards and Industry Foundation Classes Product Models for Structural Steel.
  International Conference on Computing in Civil and Building Engineering (ICCCBE), Joint International 11th. Proceedings. June 14-16, 2006, Montreal, Canada, 1-10 pp, 2006.
  Lipman, R. R.
• Mapping Chemically Heterogeneous Polymer System Using Chemical Modification and Atomic Force Microscopy.
  ACS Polymer Preprints, Vol. 41, No. 2, 1423-1424, 2000.
  Raghavan, D.; Gu, X.; VanLandingham, M. R.; Nguyen, T.
• Mapping Drying Shrinkage Deformations in Cement-Based Materials.
  Cement and Concrete Research, Vol. 27, No. 10, 1603-1612, 1997.
  Neubauer, C. M.; Jennings, H. M.; Garboczi, E. J.
• Mapping Heterogeneity in Polymeric Materials Using Atomic Force Microscopy: Phase Imaging and Nanoindentation.
  Polymeric Materials: Science and Engineering (PMSE). Spring Meeting. Volume 82. Proceedings. American Chemical Society (ASME). March 26-30, 2000, San Francisco, CA, American Chemical Society, Washington, DC, 50-51 pp, 2000.
  Gu, X.; VanLandingham, M. R.; Raghavan, D.; Nguyen, T.
• Mapping Polymer Heterogeneity Using Atomic Force Microscopy Phase Imaging and Nanoscale Indentation.
  Macromolecules, Vol. 33, No. 7, 2573-2583, 2000.
  Raghavan, D.; Gu, X.; Nguyen, T.; VanLandingham, M. R.; Karim, A.
• Materials Aspects of Fiber-Reinforced Polymer Composites in Infrastructure.
  NISTIR 5888; 46 p. August 1996.
  Chin, J. W.
• Materials-Science Based Approach to Phenol Emissions From a Flooring Material in an Office Building.
  Indoor Air Quality and Climate, 7th International Conference. Proceedings. Indoor Air '96. Volume 2. July 21-26, 1996, Nagoya, Japan, 109-114 pp, 1996.
  Martin, J. W.; Persily, A. K.; Guenther, F. R.; Nguyen, T.; Liggett, W. S., Jr.; Byrd, W. E.; Oakley, L.
• Mathematical Analysis of Moisture and Heat Transfer in the Roof Cavities of Manufactured Housing.
  Challenges of the 21st Century. Roofing Technology, Fourth (4th) International Symposium. Proceedings. First (1st) Edition. U.S. National Institute of Standards and Technology, U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, 390-400 pp, 1997.
  Burch, D. M.; Walton, G. N.; Tsongas, G. A.
• Mathematical Analysis of Practices to Control Moisture in the Roof Cavities of Manufactured Houses.
  NISTIR 5880; 60 p. September 1996.
  Burch, D. M.; Tsongas, G. A.; Walton, G. N.
• Maturity Method: From Theory to Application.
  Structures Congress and Exposition 2001. Proceedings. American Society of Civil Engineers. May 21-23, 2001, Washington, DC, Chang, P. C., Editor(s), 1-19 pp, 2001.
  Carino, N. J.; Lew, H. S.
• Mean-Field-Scaling in Lattice Boltzmann Fluid Mixtures.
  ASCE Engineering Mechanics Division Conference, 13th Proceedings. American Society of Civil Engineers (ASCE). June 13-16, 1999, Baltimore, MD, 1-6 pp, 1999.
  Martys, N. S.; Douglas, J. F.
• Mean Recurrence Intervals of Ultimate Wind Loads.
  OMAE98-1218;Offshore Mechanics and Arctic Enginering (OMAE), 17th International Conference. Proceedings. American Society of Mechanical Engineers. OMAE98-1218. July 1998, 1-6 pp, 1998.
  Simiu, E.; Heckert, N. A.; Whalen, T. M.
• Measured Performance of a 35 Kilowatt Roof Top Photovoltaic System.
  International Solar Energy Conference. ISEC2003. ASME International. Proceedings. March 15-18, 2003, Hawaii, 2003.
  Fanney, A. H.; Henderson, K. R.; Weise, E. R.
• Measured Performance of Building Integrated Photovoltaic Panels.
  ASME Journal of Solar Energy Engineering, Special Issue: Solar Thermochemical Processing, Vol. 123, No. 2, 187-193, August 2001.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Measured Performance of Building Integrated Photovoltaic Panels. Round 2.
  Journal of Solar Energy Engineering (Transactions of the ASME), Vol. 127, 314-323, August 2005.
  Dougherty, B. P.; Fanney, A. H.; Davis, M. W.
• Measured Versus Predicted Performance of Building Integrated Photovoltaics.
  Journal of Solar Energy Engineering (Transactions of the ASME), Vol. 125, No. 1, 21-32, February 2003.
  Davis, M. W.; Fanney, A. H.; Dougherty, B. P.
• Measurement and Determination of Radon Source Potential: A Literature Review.
  NISTIR 5399; 196 p. April 1994.
  Tanner, A. B.
• Measurement and Prediction of Pore Pressure in Cement Mortar Subjected to Elevated Temperature.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B8. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 125-148 pp, 1997.
  Consolazio, G. R.; McVay, M. C.; Rish, J. W., III
• Measurement and Simulation of the IAQ Impact of Particle Air Cleaners in a Single-Zone Building.
  NISTIR 6461; 43 p. February 2000.
  Emmerich, S. J.; Nabinger, S. J.
• Measurement and Simulation of the Indoor Air Quality Impact of Gaseous Air Cleaners in a Test House.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 652-657 pp, 2002.
  Howard-Reed, C.; Nabinger, S. J.; Emmerich, S. J.
• Measurement and Simulation of the Indoor Air Quality Impact of Gaseous Air Cleaners in a Test House.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 652-657 pp, 2002.
  Howard-Reed, C.; Nabinger, S. J.; Emmerich, S. J.
• Measurement Approaches to Develop a Fundamental Understanding of Scratch and Mar Resistance.
  Federation of Societies for Coatings Technology (FSCT) Technical Program Annual Meeting, 81st. November 12-14, 2003, Philadelphia, PA, Federation of Societies for Coatings Technology, Blue Bell, PA, 2003.
  VanLandingham, M. R.; Chang, N, K.; Wu, T. Y.; Chang, S. H.; Sung, L. P.; Jardret, V. D.
• Measurement Approaches to Develop a Fundamental Understanding of Scratch and Mar Resistance.
  Journal of Coatings Technology Research, Vol. 1, No. 4, 257-266, 2004.
  VanLandingham, M. R.; Sung, L. P.; Chang, N. K.; Wu, T. Y.; Chang, S. H.; Jardret, V. D.
• Measurement of Air-Velocity Profiles for Finned-Tube Heat Exchangers Using Particle Image Velocimetry.
  2195;International Refrigeration and Air-Conditioning Conference. Proceedings. July 14-17, 2008, West Lafayette, IN, 1-8 pp, 2008.
  Yashar, D. A.; Domanski, P. A.; Cho, H. H.
• Measurement of Internal Strain in Cast-Concrete Structures.
  Experimental Mechanics, Vol. 23, No. 4, 361-369, December 1983.
  Stone, W. C.
• Measurement of Particle Size Distribution in Portland Cement Powder: Analysis of ASTM Round Robin Studies.
  Cement, Concrete and Aggregates, Vol. 26, No. 2, 1-11, 2004.
  Ferraris, C. F.; Hackley, V. A.; Aviles, A. I.
• Measurement of Rheological Properties of High Performance Concrete: State of the Art Report.
  Journal of Research of the National Institute of Standards and Technology, Vol. 104, No. 5, 461-478, September/October 1999.
  Ferraris, C. F.
• Measurement of Rheological Properties of High Performance Concrete: State of the Art Report.
  NISTIR 5869; 39 p. July 1996.
  Ferraris, C. F.
• Measurement of the Heat Capacities of Pure and Mixed Refrigerants.
  Thermophysical Properties, 10th Symposium. Proceedings. June 20-23, 1988, Gaithersburg, MD, 1988.
  Radermacher, R.
• Measurement of the Rheological Properties of Cement Paste: A New Approach.
  Role of Admixtures in High Performance Concrete, RILEM International Symposium. Proceedings. Sponsored by Cementos Mexicanos, S.A. (CEMEX). March 21-26, 1999, Monterrey, Mexico, RILEM Publications S.A.R.L., Cabrera, J. G.; Rivera-Villarreal, R. R., Editor(s)(s), 333-342 pp, 1999.
  Ferraris, C. F.
• Measurement of Water Transport from Saturated Pumice Aggregates to Hardening Cement Paste.
  Advances in Cement and Concrete. Proceedings. Engineering Conferences International. August 10-14, 2003, Copper Mountain, CO, 89-99 pp, 2003.
  Lura, P.; Bentz, D. P.; Lange, D. A.; Kovler, K.; Bentur, A.; vanBreugel, K.
• Measurement of Workability of Fresh Concrete Using a Mixing Truck.
  Journal of Research of the National Institute of Standards and Technology, Vol. 110, No. 1, 55-66, January/February 2005.
  Amziane, S.; Ferraris, C. F.; Koehler, E. P.
• Measurements and Predictions of Light Scattering by Clear Coatings.
  Applied Optics, Vol. 40, No. 13, 2159-2168, May 1, 2001.
  McKnight, M. E.; Vorburger, T. V.; Marx, E.; Nadal, M. E.; Barnes, P. V.; Galler, M. A.
• Measurements of Indoor Pollutant Emissions From EPA Phase II Wood Stoves.
  NISTIR 5575; 65 p. February 1995.
  Nabinger, S. J.; Persily, A. K.; Sharpless, K. S.; Wise, S. A.
• Measurements of Outdoor Air Distribution in an Office Building.
  NISTIR 5320; 54 p. June 1994.
  Dols, W. S.; Persily, A. K.
• Measurement Techniques for Horizontal Flow Boling Heat Transfer With Pure and Mixed Refrigerants.
  Experimental Heat Transfer, Vol. 2, 237-255, 1989.
  Jung, D. S.; McLinden, M.; Radermacher, R.
• Measuring Peel Adhesion of Coatings.
  Journal of Protective Coatings and Linings, Vol. 12, No. 5, 82-89, May 1995.
  McKnight, M. E.; Seiler, J. F., Jr.; Nguyen, T.; Rossiter, W. J., Jr.
• Measuring Tg in Ultra-Thin Polymer Films With an Excimer Fluorescence Technique.
  Polymer Engineering and Science, Vol. 41, No. 9, 1497-1505, September 2001.
  White, C. C.; Migler, K. B.; Wu, W. L.
• Measuring the Impacts of the Delivery System on Project Performance: Design-Build and Design-Bid-Build.
  NIST GCR 02-840; 105 p. November 2002.
  Thomas, S. R.; Macken, C. L.; Chung, T. H.; Kim, I.
• Mechanical Properties of Blends of HDPE and Recycled Urea-Formaldehyde Resin.
  Journal of Applied Polymer Science, Vol. 77, No. 14, 3220-3227, 2000.
  Bliznakov, E. D.; White, C. C.; Shaw, M. T.
• Mechanical Properties of Blends of HDPE and Recycled Urea-Formaldehyde Resin.
  Journal of Applied Polymer Science, Vol. 77, No. 14, 3220-3227, 2000.
  Bliznakov, E. D.; White, C. C.; Shaw, M. T.
• Mechanical Properties of High Performance Concrete After Exposure to Elevated Temperatures.
  NISTIR 6475; 39 p. March 2000.
  Lawson, J. R.; Phan, L. T.; Davis, F. L.
• Mechanical Properties of High-Strength Concrete at Elevated Temperatures.
  NISTIR 6726; 102 p. March 2001.
  Phan, L. T.; Carino, N. J.
• Mechanical Properties of Siliceous HSC Subjected to High-Temperature Cycles.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B9. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 149-153 pp, 1997.
  Felicetti, R.; Gambarova, P. G.
• Mechanisms of Degradation of Portland Cement-Based Systems by Sulfate Attack.
  Chapter 22;Mechanisms of Chemical Degradation of Cement-Based Systems. Proceedings of the Materials Research Society's Symposium on Mechanisms of Chemical Degradation of Cement-Based Systems. November 27-30, 1995, Boston, MA, E & FN Spon, London, England, Scrivener, K. L.; Young, J. F., Editor(s)(s), 185-192 pp, 1997.
  Ferraris, C. F.; Clifton, J. R.; Stutzman, P. E.; Garboczi, E. J.
• Melnikov-Based Open-Loop Control of Escape for a Class of Nonlinear Systems.
  American Society of Mechanical Engineers. Design Engineering Technical Conferences. Proceedings. DE-Vol. 84-1. Book No. H1000A. 1995, Cudney, H. H.; Sinha, S. C.; Cusumano, J. P.; Pfeiffer, F., Editor(s)(s), 897-902 pp, 1995.Journal of Dynamic Systems, Measurement, and Control, Vol. 119, 590-594, September 1997.
  Simiu, E.; Franaszek, M.
• Melnikov-Based Open-Loop Control of Escape for a Class of Nonlinear Systems.
  American Society of Mechanical Engineers. Design Engineering Technical Conferences. Proceedings. DE-Vol. 84-1. Book No. H1000A. 1995, Cudney, H. H.; Sinha, S. C.; Cusumano, J. P.; Pfeiffer, F., Editor(s)(s), 897-902 pp, 1995.Journal of Dynamic Systems, Measurement, and Control, Vol. 119, 590-594, September 1997.
  Simiu, E.; Franaszek, M.
• Melnikov Necessary Condition for Noise-Induced Escapes.
  International Association for Civil Engineering Reliability and Risk Analysis (CERRA). International Conference on ICASP, 7th Proceedings. Applications of Statistics and Probability. Civil Engineering Reliability and Risk Analysis. July 10-13, 1995, Paris, France, A.A. Balkema, Rotterdam, Lemaire, M.; Favre, J. L.; Mebarki, A., Editor(s)(s), 1137-1142 pp, 1995.
  Simiu, E.; Frey, M. R.; Hagwood, C.
• Melnikov Necessary Condition for Noise-Induced Escapes.
  International Association for Civil Engineering Reliability and Risk Analysis (CERRA). International Conference on ICASP, 7th Proceedings. Applications of Statistics and Probability. Civil Engineering Reliability and Risk Analysis. July 10-13, 1995, Paris, France, A.A. Balkema, Rotterdam, Lemaire, M.; Favre, J. L.; Mebarki, A., Editor(s)(s), 1137-1142 pp, 1995.
  Simiu, E.; Frey, M. R.; Hagwood, C.
• Melnikov Processes and Noise-Induced Escapes: Applications to Engineering, Physics, and Biology.
  Stochastically Excited Nonlinear Ocean Structures. Chapter 7, World Scientific, NJ, Shlesinger, M. F.; Swean, T., Editor(s)(s), 187-212 pp, 1998.
  Franaszek, M.; Frey, M. R.; Simiu, E.
• Melnikov Processes and Noise-Induced Exits From a Well.
  Paper 9809;Journal of Engineering Mechanics, Vol. 122, No. 3, 263-270, March 1996.
  Simiu, E.; Frey, M. R. R.
• Melnikov Process for Stochastically Perturbed, Slowly Varying Oscillators: Application to a Model of Wind-Driven Coastal Currents.
  Journal of Applied Mechanics, Vol. 63, 429-435, June 1996.
  Simiu, E.
• MEMS Application in Pavement Condition Monitoring: Challenges.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 387-392 pp, 2002.
  Attoh-Okine, N. O.; Menash, S.
• MEMS Sensors for HVAC&R: Small, Fast, Cheap.
  ASHRAE Journal, 69-74, May 2004.
  Yashar, D. A.; Domanski, P. A.
• MEMS Transducer for Ultrasonic Flaw Detection.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 375-380 pp, 2002.
  Jain, A.; Greve, D. W.; Oppenheim, I. J.
• Meteorological Extremes.
  Encyclopedia of Environmetrics. Volume 3. 2002, John Wiley and Sons, Ltd., Chichester, UK, El-Shaarawi, A. H.; Piegorsch, W. W., Editor(s)(s), 1255-1259 pp, 2002.
  Simiu, E.
• Method for Estimating the Energy Efficiency Ratio of Mixed System Air Conditioners and Heat Pumps.
  NISTIR 6045; 35 p. September 1997.
  Domanski, P. A.; Kim, B. S.
• Method for Measuring Water Diffusion in a Coating Applied to a Substrate.
  Journal of Coatings Technology, Vol. 67, No. 844, 37-46, 1995.
  Nguyen, T.; Bentz, D. P.; Byrd, W. E.
• Method of Estimating the Parameters of Tuned Mass Dampers for Seismic Applications.
  NISTIR 5806; 39 p. April 1996.Earthquake Engineering and Structural Dynamics, Vol. 26, 617-635, 1997.
  Sadek, F.; Mohraz, B.; Taylor, A. W.; Chung, R. M.
• Method of Estimating the Parameters of Tuned Mass Dampers for Seismic Applications.
  NISTIR 5806; 39 p. April 1996.Earthquake Engineering and Structural Dynamics, Vol. 26, 617-635, 1997.
  Sadek, F.; Mohraz, B.; Taylor, A. W.; Chung, R. M.
• Method of Estimating the Parameters of Tuned Mass Dampers for Seismic Applications.
  NISTIR 5806; 39 p. April 1996.Earthquake Engineering and Structural Dynamics, Vol. 26, 617-635, 1997.
  Sadek, F.; Mohraz, B.; Taylor, A. W.; Chung, R. M.
• Method of Test for Tracer Gas Test of an Outdoor Furnace Designed for Installation Without a Flue Pipe.
  NISTIR 6257; 20 p. November 1998.
  Liu, S. T.; Kelly, G. E.
• Methodologies for Predicting the Service Lives of Coating Systems.
  NIST BSS 172; Federation Series; 34 p. October 1994.
  Martin, J. W.; Saunders, S. C.; Floyd, F. L.; Wineburg, J. P.
• Methodologies for Predicting the Service Lives of Coating Systems.
  NIST BSS 172; Federation Series; 34 p. October 1994.
  Martin, J. W.; Saunders, S. C.; Floyd, F. L.; Wineburg, J. P.
• Methodology for Development of Design Criteria for Joint Hurricane Wind Speed and Storm Surge Events: Proof of Concept.
  NIST TN 1482; NIST Technical Note 1482; 53 p. April 2007.
  Phan, L. T.; Simiu, E.; McInerney, M. A.; Taylor, A. A.; Glahn, B.; Powell, M. D.
• Methods of Estimating Loads in Plumbing Systems.
  BMS 65; 23 p. December 16, 1940.
  Hunter, R. B.
• Method to Assess the Suitability of a Climate for Natural Ventilation of Commercial Buildings.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 854-859 pp, 2002.
  Axley, J. W.; Emmerich, S. J.
• Metrology for Characterizing Sratch Resistance of Polymer Coatings.
  Annual Meeting, 82nd. Federation of Societies for Coatings Technology Meeting Technical Program. Federation of Societies for Coatings Technology (FSCT) Meeting. Proceedings. October 27-29, 2004, Chicago, IL, Federation of Societies for Coatings Technology, Blue Bell, PA, 2004.
  Sung, L. P.; Drzal, P. L.; VanLandingham, M. R.; Wu, T. Y.
• Micro Effects for Single Phase Pressure Drop In Microchannels.
  International Journal of Transport Phenomena, Vol. 10, 103-112, 2008.
  Han, D. H.; Kedzierski, M. A.
• Microfabricated Flow Controller for Refrigerant Expansion.
  Journal of Microelectromechanical Systems, Vol. 16, No. 5, 1106-1112, October 2007.
  Yashar, D. A.; Domanski, P. A.; DeVoe, D. L.
• Micro Level Analysis of the Relationship Between Changes in Equipment Technology and Wages in the U.S. Construction Industry.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 281-286 pp, 2002.
  Goodrum, P. M.; Gangwar, M.
• Microstructural Modelling of Self-Desiccation During Hydration.
  TVBM-3074;Self-Desiccation and Its Importance in Concrete Technology. Proceedings. International Research Seminar. June 10, 1997, Lund, Sweden, 132-140 pp, 1997.
  Bentz, D. P.; Snyder, K. A.; Stutzman, P. E.
• Microstructure and Morphology of Amine-Cured Epoxy Coatings and Their Changes With Outdoor Exposures: An AFM Study.
  Journal of Coatings Technology Research, Vol. 1, No. 3, 2004.
  Gu, X.; Nguyen, T.; Ho, D. L.; Oudina, M.; Martin, D.; Kidah, B.; Jamin, J.; Rezig, A.; Sung, L. P.; Byrd, E.; Martin, J. W.; Jean, Y. C.
• Microstructure and Transport Properties of Concrete.
  RILEM. Performance Criteria for Concrete Durability. Proceedings. State of the Art Report prepared by RILEM Technical Committee TC 116-PCD, Performance of Concrete as a Criterion of Its Durability. RILEM Report 12. Chapter 8. 1995, E & FN SPON, London,England, Kropp, J.; Hilsdorf, H. K., Editor(s)(s), 198-212 pp, 1995.
  Garboczi, E. J.
• Microstructure and Transport Properties of Porous Building Materials. Part 2. Three-Dimensional X-Ray Tomographic Studies.
  Materials and Structures, Vol. 33, No. 227, 147-153, April 2000.
  Bentz, D. P.; Quenard, D. A.; Kunzel, H. M.; Baruchel, J.; Peyrin, F.; Martys, N. S.; Garboczi, E. J.
• Microstructure and Transport Properties of Porous Building Materials.
  Materials and Structures, Vol. 31, 317-324, June 1998.
  Quenard, D. A.; Xu, K.; Kunzel, H. M.; Bentz, D. P.; Martys, N. S.
• Microstructure of Portland Cement-Based Materials: Computer Simulation and Percolation Theory.
  Computational and Mathematical Models of Microstructural Evolution. Materials Research Society Symposium Proceedings. Volume 529. April 13-17, 1998, San Francisco, CA, Materials Research Society, Pittsburgh, PA, 89-100 pp, 1998.
  Garboczi, E. J.; Bentz, D. P.
• Microstructure Property Relationships in Concrete: From Nanometers to Centimeters.
  Second (2nd) Canmet/ACI. Advances in Concrete Technology. International Symposium. Supplementary Papers. 1995, Las Vegas, NV, Malhotra, V. M., Editor(s), 573-585 pp, 1995.
  Garboczi, E. J.; Bentz, D. P.
• Minimizing Throttline Losses in the Refrigeration Cycle.
  International Congress of Refrigeration, 19th Proceedings. Volume IVb. Theme 4. IIR Commission B2. August 1995, Hague, The Netherlands, 766-773 pp, 1995.
  Domanski, P. A.
• Minimizing Throttline Losses in the Refrigeration Cycle.
  International Congress of Refrigeration, 19th Proceedings. Volume IVb. Theme 4. IIR Commission B2. August 1995, Hague, The Netherlands, 766-773 pp, 1995.
  Domanski, P. A.
• Mitigating Autogeneous Shrinkage by Internal Curing.
  Special Publication 218;High-Performance Structural Lightweight Concrete. American Concrete Institute Special Publication 218. Proceedings. 2004, Ries, J. P.; Holm, T. A., Editor(s)(s), 143-148 pp, 2004.
  Geiker, M. R.; Bentz, D. P.; Jensen, O. M.
• Mitigation Strategies for Autogenous Shrinkage Cracking.
  Cement and Concrete Research, Vol. 26, No. 6, 677-685, August 2004.
  Bentz, D. P.; Jensen, O. M.
• Mixed Reality Benefits for Design Perception.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 191-196 pp, 2002.
  Dunston, P. S.; Wang, X.; Billinghurst, M.; Hampson, B.
• Mixture Proportioning for Internal Curing.
  Concrete International, Vol. 27, No. 2, 35-40, February 2005.
  Bentz, D. P.; Lura, P.; Roberts, J. W.
• Mobile 3D Visualization for Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 53-58 pp, 2002.
  Lipman, R. R.
• Mobile 3D Visualization for Steel Structures.
  Automation in Construction, Vol. 13, No. 1, 119-125, January 2004.
  Lipman, R. R.
• Mobile Robot Pose Tracking for Performance Analysis.
  Performance Metrics for Intelligent Systems PerMIS 2002. August 13-15, 2002, Gaithersburg, MD, 2002.
  Lytle, A. M.; Saidi, K. S.; Stone, W. C.; Shneier, M.
• Mobile Sensor Platform for Construction Metrology and Automation: Design and Initial Results.
  Robotic Applications for the Next Millenium. Field and Service Robotics International Conference. FSR'99. Proceedings. August 29-31, 1999, Pittsburgh, PA, 310-315 pp, 1999.
  Pfeffer, L. E.
• Model for a Quantitative Corrosion Damage Function for a Reinforced Concrete Marine Substructure.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.2. November 9-10, 1998, 4-6 pp, 1999.
  Sagues, A.
• Model for Automated Road-Construction Control.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 425-429 pp, 2002.
  Navon, R.; Shpatnitsky, Y.; Goldschmidt, E.
• Modeling Drying Shrinkage in Reconstructed Porous Materials: Application to Porous Vycor Glass.
  Modelling and Simulation in Materials Science and Engineering, Vol. 6, 211-236, 1998.
  Bentz, D. P.; Garboczi, E. J.; Quenard, D. A.
• Modeling Drying Shrinkage of Cement Paste and Mortar. Part 1. Structural Models From Nanometres to Millimetres.
  Materials and Structures, Vol. 28, 450-458, 1995.
  Bentz, D. P.; Quenard, D. A.; Baroghel-Bounty, V.; Garboczi, E. J.; Jennings, H. M.
• Modeling Ion and Fluid Transport in Unsaturated Cement Systems in Isothermal Conditions.
  Cement and Concrete Research, Vol. 45, No. 1, 141-153, January 2005.
  Samson, E.; Marchand, J.; Snyder, K. A.; Beaudoin, J. J.
• Modeling Ion Transport in Cement-Based Materials.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.6. November 9-10, 1998, 11-12 pp, 1999.
  Marchand, J.; Samson, E.; Maltais, Y.
• Modeling Moisture in Residential Buildings with a Multizone IAQ Program.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 4. June 30-July 5, 2002, Monterey, CA, 328-333 pp, 2002.
  Emmerich, S. J.; Persily, A. K.; Nabinger, S. J.
• Modeling Study of Ventilation, IAQ and Energy Impacts of Residential Mechanical Ventilation.
  NISTIR 6162; 85 p. May 1998.
  Persily, A. K.
• Modeling Study of Ventilation in Manufactured Houses.
  NISTIR 6455; 87 p. February 2000.
  Persily, A. K.; Martin, S. R.
• Modeling the Effects of Outdoor Gasonline Powered Generator Use on Indoor Carbon Monoxide Exposures.
  NIST Technical Note 1637; NIST TN 1637; 23 p. August 2009.
  Wang, L.; Emmerich, S. J.
• Modeling the Elastic Properties of Concrete Composites: Experiment, Differential Effective Medium Theory and Numerical Simulation.
  Cement and Concrete Composites, Vol. 29, No. 1, 22-38, January 2007.
  Sun, Z.; Garboczi, E. J.; Shah, S. P.
• Modeling the IAQ Impact of HH1 Interventions in Inner-City Housing.
  NISTIR 7212; 99 p. March 2005.
  Emmerich, S. J.; Howard-Reed, C.; Gupte, A.
• Modeling the Influence of the Interfacial Zone on the DC Electrical Conductivity of Mortar.
  Advanced Cement Based Materials, Vol. 2, 169-181, 1995.
  Garboczi, E. J.; Schwartz, L. M.; Bentz, D. P.
• Modeling the Microstructure and Elastic Properties of Complex Materials.
  MSM 2000 International Conference on Modeling and Simulation of Microsystems. Proceedings. Applied Computational Research Society. March 27-29, 2000, San Diego, CA, 27-29 pp, 2000.
  Roberts, A. P.; Garboczi, E. J.
• Modeling the Microstructure and Elastic Properties of Complex Materials.
  MSM 2000 International Conference on Modeling and Simulation of Microsystems. Proceedings. Applied Computational Research Society. March 27-29, 2000, San Diego, CA, 27-29 pp, 2000.
  Roberts, A. P.; Garboczi, E. J.
• Modeling the Performance of a Naturally Ventilated Commercial Building With a Multizone Coupled Thermal/Airflow Simulation Tool.
  HI-02021-4;ASHRAE Transactions 2002 Annual Meeting. Proceedings. 2002, Honolulu, HI, 1-16 pp, 2002.ASHRAE Transactions, Vol. 108, No. 2,
  Axley, J.; Emmerich, S. J.; Walton, G. N.
• Model Investigation of the Influence of Particle Shape on Portland Cement Hydration.
  Cement and Concrete Research, Vol. 36, No. 6, 1007-1015, June 2006.
  Bullard, J. W.; Garboczi, E. J.
• Modelling Cement Microstructure: Pixels, Particles, and Property Prediction.
  Materials and Structures, Vol. 32, 187-195, April 1999.
  Bentz, D. P.
• Modelling Chloride Ingress by the Combined Processes of Diffusion and Convection.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.5. November 9-10, 1998, 9-11 pp, 1999.
  Thomas, M.; Bentz, E.
• Modelling of the Microstructure and Transport Properties of Concrete.
  Construction and Building Materials, Vol. 10, No. 5, 293-300, 1996.
  Garboczi, E. J.; Bentz, D. P.
• Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD on November 9-10, 1998.
  NISTIR 6327; 55 p. May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. November 9-10, 1998, 55 pp, 1999.
  Frohnsdorff, G. J. C.
• Modelling the D.C. Electrical Conductivity of Mortar.
  Materials Research Society. Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials. Materials Research Society Symposium Proceedings Volume 370. November 28-December 1, 1994, Boston, MA., Materials Research Society, Pittsburgh, PA, Diamond, S.; Mindess, S.; Glasser, F. P.; Roberts, L. W., Editor(s)(s), 429-436 pp, 1995.
  Garboczi, E. J.; Schwartz, L. M.; Bentz, D. P.
• Model Performance Standard for Guardrails. Final Report.
  NBSIR 76-1131; 30 p. July 1976.
  Fattal, S. G.; Cattaneo, L. E.; Turner, G. E.; Robinson, S. N.
• Modes and Mechanisms of Degradation of Epoxy-Coated Reinforcing Steel in a Marine Environment.
  Durability of Building Materials and Components 7th. Volume 1. Chapter 51. 1996, E&FN Spon, London, England, Sjostrom, C., Editor(s), 491-502 pp, 1996.
  Nguyen, T.; Martin, J. W.
• Modified Optimal Algorithm for Active Structural Control.
  NISTIR 5782; 29 p. January 1996.
  Sadek, F.; Mohraz, B.
• Modified Slump Test to Measure Rheological Parameters of Fresh Concrete.
  Cement,Concrete, and Aggregates, Vol. 20, No. 2, 241-247, December 1998.
  Ferraris, C. F.; deLarrard, F.
• MOIST: A PC Program for Predicting Heat and Moisture Transfer in Building Envelopes. Version 3.0.
  NIST SP 917; 47 p. September 1997.
  Burch, D. M.; Chi, J.
• Moisture Sensor Technology: A Summary of Techniques for Measuring Moisture Levels in Building Envelopes.
  ASHRAE transactions, Vol. 109, No. 1, 232-242, February 2003.
  Healy, W. M.
• Monitoring Construction Equipment for Automated Project Performance Control.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 161-166 pp, 2002.
  Sacks, R.; Navon, R.; Shapira, A.; Brodetsky, I.
• Monitoring of the Boring Trajectory in Underground Channel.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 519-522 pp, 2002.
  Bock, T.; Bulgakow, A.; Krapivin, D.; Aleksyuk, S.; Pritchin, S.
• Motion Planning Taking Into Account the Dynamic Model of Vehicles: Application to the Compactor.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 223-228 pp, 2002.
  Lemaire, C. E.; Vandanjon, P. O.; Gautier, M.; Peyret, F.
• Multiattribute Decision Analysis Method for Evaluating Buildings and Building Systems.
  NISTIR 5663; 86 p. September 1995.
  Norris, G. A.; Marshall, H. E.
• Multiscale Analytical/Numerical Theory of the Diffusivity of Concrete.
  Advanced Cement Based Materials, Vol. 8, 77-88, 1998.
  Garboczi, E. J.; Bentz, D. P.
• Multi-Scale Digital-Image-Based Modelling of Cement-Based Materials.
  Materials Research Society. Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials Symposia. Materials Research Society Symposium Proceedings Volume 370. November 28-December 1, 1994, Boston, MA, Materials Research Society, Pittsburgh, PA, Diamond, S.; Mindess, S.; Glasser, F. P.; Roberts, L. W., Editor(s)(s), 33-41 pp, 1995.
  Bentz, D. P.; Garboczi, E. J.; Jennings, H. M.; Quenard, D. A.
• Multi-Scale Microstructural Modeling of Concrete Diffusivity: Identification of Significant Variables.
  Cement, Concrete, and Aggregates, Vol. 20, No. 1, 129-139, June 1998.
  Bentz, D. P.; Garboczi, E. J.; Lagergren, E. S.
• Multi-Scale Microstructural Modeling to Predict Chloride Ion Diffusivity for High Performance Concrete.
  Materials Science of Concrete Special Volume: Ion and Mass Transport in Cement-Based Materials. Proceedings. American Ceramic Society. October 4-5, 1999, Toronto, Canada, 253-267 pp, 2001.
  Bentz, D. P.; Garboczi, E. J.
• Multiscale Modeling of Fluid Transport in Heterogeneous Materials Using Discrete Boltzmann Methods.
  Materials and Structures, Vol. 35, 650-659, December 2002.
  Martys, N. S.; Hagedorn, J. G.
• Multi-Scale Picture of Concrete and Its Transport Properties: Introduction for Non-Cement Researchers.
  NISTIR 5900; 52 p. October 1996.
  Garboczi, E. J.; Bentz, D. P.
• Multi-Sensory Approach to 3-D Mapping of Underground Utilities.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 525-530 pp, 2002.
  Bernold, L. E.; Venkatesan, L.; Suvarna, S.
• Multizone Modeling Approaches to Contaminant-Based Design.
  HI-02-9-1;ASHRAE Transactions 2002 Annual Meeting. Proceedings. 2002, Honolulu, HI, 1-8 pp, 2002.ASHRAE Transactions, Vol. 108, No. 2,
  Musser, A.; Persily, A. K.
• Multizone Modeling as an Indoor Air Quality Design Tool.
  Health Buildings 2000, 6th International Conference. Proceedings. Volume 2. Design and Operation of HVAC Systems. August 6-10, 2000, Espoo, Finland, 455-460 pp, 2000.
  Musser, A.
• Multizone Modeling of Three Residential Indoor Air Quality Control Options.
  NISTIR 5801; 142 p. March 1996.
  Emmerich, S. J.; Persily, A. K.
• Multizone Modeling of Three Residential Indoor Air Quality Control Options.
  IBPSA. Building Simulation '95. 4th International Conference. Proceedings. 1995, 213-220 pp, 1995.
  Emmerich, S. J.; Persily, A. K.
• Myths About Building Envelopes.
  ASHRAE Journal, Vol. 41, No. 3, 39-47, March 1999.
  Persily, A. K.

N

• Nanocharacterization of Surface and Interface of Different Epoxy Networks.
  DD Polymer Interfaces and Thin Films. Materials Research Society (MRS) Symposium. Proceedings. Volume 710. 2002, Karim, A.; Frank, C. W.; Russel, T. P.; Nealey, P. F., Editor(s)(s), DD109.1-DD109.6 pp, 2002.
  Gu, X.; Ho, D. L.; Sung, L. P.; VanLandingham, M. R.; Nguyen, T.; Raghavan, D.
• Nanoidentation of Polymers: Overview.
  ACS Polymer Preprints, Vol. 41, No. 2, 1412-1413, 2000.
  VanLandingham, M. R.; Villarrubia, J. S.; Meyers, G. F.
• Nanoindentation of Polymers: An Overview.
  Advances in Scanning Probe Microscopy of Polymers. Macromolecular Symposia. Volume 167. Proceedings. 2001, Tsukruk, V. V.; Spencer, N. D., Editor(s)(s), 15-44 pp, 2001.
  VanLandingham, M. R.; Villarrubia, J. S.; Guthrie, W. F.; Meyers, G. F.
• Nanoscale Characterization of Coatings Surface Degradation With Tapping Atomic Force Microscopy.
  Adhesion Fundamentals: From Molecules to Mechanisms and Modeling. Adhesion Society Annual Meeting, 26th. Proceedings. February 23-26, 2003, Myrtle Beach, SC, 508-510 pp, 2003.
  Nguyen, T.; Gu, X.; VanLandingham, M.; Ryntz, R.; Nugyen, D.; Martin, J. W.
• National Construction Sector Goals. Industry Strategies for Implementation.
  NIST GCR 95-680; 42 p. July 1995.
  Civil Engineering Research Foundation
• National Institute of Standards and Technology. Workshop on Research Needs in Wind Engineering. Proceedings. September 12-13, 1994. Gaithersburg, Maryland.
  NISTIR 5597; February 1995.National Institute of Standards and Technology. Workshop on Research Needs in Wind Engineering. Proceedings. September 12-13, 1994, Gaithersburg, MD, 75 pp, 1995.
  Marshall, R. D.
• National Planning for Construction and Building R&D.
  NISTIR 5759; 102 p. December 1995.
  Wright, R. N.; Rosenfeld, A. H.; Fowell, A. J.
• Natural Disasters and Protective Measures in Japan.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 3-12 pp, 1998.
  Inoue, Y.
• Natural Disasters: Some Empirical and Economic Considerations. Final Report.
  NBSIR 74-473; February 1974.
  Sav, G. T.
• Natural Ventilation Review and Plan for Design and Analysis Tools.
  NISTIR 6781; 60 p. August 2001.
  Emmerich, S. J.; Dols, W. S.; Axley, J. W.
• Neutron Reflectivity Study of Diblock Formation During Reactive Blending Processes.
  Macromolecules, Vol. 33, No. 17, 6485-6494, 2001.
  Hayashi, M.; Grull, H.; Esker, A. R.; Sung, L. P.; Satija, S.; Han, C. C.; Weber, M.; Hashimoto, T.
• New Age in Building Control Systems.
  Construction Business Review, 60-65, March/April 1994.
  Bushby, S. T.
• New Developments in Seismic Risk Analysis for Highway Systems.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 319-343 pp, 1998.
  Werner, S. D.; Taylor, C. E.; Moore, J. E.; Mander, J. B.; Jernigan, J. B.; Hwang, H. W. M.
• New Effective Medium Theory for the Diffusivity or Conductivity of a Multi-Scale Concrete Microstructure Model.
  Concrete Science and Engineering, Vol. 2, 88-96, June 2000.
  Garboczi, E. J.; Berryman, J. G.
• New Framework for Performance Based Design of Building Structures: Design Flow and Social System.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 234-247 pp, 1998.
  Hiraishi, H.; Teshigawara, M.; Fukuyama, H.; Saito, T.; Gojo, W.; Fujitani, H.; Ohashi, Y.; Okawa, I.; Okada, H.
• New Hurricane Wind Structures and Wind Speed Measurements.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 407-414 pp, 1998.
  Black, P. G.; Marks, F. D., Jr.
• New Insitu Technique for Measuring the Concentration of Lubricant on a Boiling Heat Transfer Surface.
  NISTIR 6110; 43 p. January 1998.
  Kedzierski, M. A.; Bruno, T. J.; O'Neill, M. B.
• New Look at Windows.
  NBSIR 77-1388; January 1978.
  Collins, B. L.; Ruegg, R. T.; Chapman, R.; Kusuda, T.
• New Mass Transport Elements and Components for the NIST IAQ Model.
  NIST GCR 95-676; 33 p. July 1995.
  Axley, J. W.
• New Method for Simulating Fracture Using an Elastically Uniform Random Geometry Lattice.
  International Journal of Engineering Science, Vol. 34, No. 10, 1131-1144, 1996.
  Schlangen, E.; Garboczi, E. J.
• New Sequencing Control Strategy for Air-Handling Units.
  HVAC&R Research, Vol. 5, No. 1, 35-58, January 1999.
  Seem, J. E.; Park, C.; House, J. M.
• New Testing and Rating Procedures for Seasonal Performance of Heat Pumps.
  ASHRAE Journal, Vol. 8921, No. 9, 40-44, September 1979.
  Didion, D. A.; Kelly, G. E.
• New Tool for the Investigation of a Class of Nonlinear Stochastic Differential Equations: The Melnikov Process.
  Advances in Nonlinear Stochastic Mechanics IUTAM Symposium. Proceedings. July 3-7, 1995, Trondheim, Norway, Kluwer Academic Publishers, Boston, MA, Naess, A.; Krenk, S., Editor(s)(s), 427-463 pp, 1996.
  Simiu, E.; Franaszek, M.
• New Tools for Specifying BACnet.
  ASHRAE Journal, 33-37, March 2002.
  Bushby, S. T.
• Next-Generation Building and Infrastructure Systems. Report of Task Committee B.
  Technical Memorandum of PWRI 4075; Report of Task Committee B;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 39th. Technical Memorandum of PWRI 4075. Proceedings. May 14-16, 2007, Tsukuba, Japan, 457-458 pp, 2007.
  Foutch, D.; Raufaste, N.; Roper, W.; Malilay, J.; Yip, F.; Rice, J.; Kaminosono, T.; Fukuyama, H.; Shiohara, H.; Saito, T.; Morita, K.
• Next Generation Trans-Strait Road Projects and the State of Technology Development.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 392-406 pp, 1998.
  Okahara, M.; Nishitani, M.
• NIST Building and Fire Research Laboratory Projects Summaries, 1994.
  NIST SP 838-5; 158 p. June 1994.
  Raufaste, N. J., Jr.
• NIST Building and Fire Research Laboratory Projects Summaries, 1995.
  NIST SP 838-8; 213 p. August 1995.
  Raufaste, N. J., Jr.
• NIST Building and Fire Research Laboratory Projects Summaries, 1996.
  NIST SP 838-10; 226 p. September 1996.
  Raufaste, N. J., Jr.
• NIST Building and Fire Research Laboratory Project Summaries, 1997.
  NIST SP 838-13; 229 p. November 1997.
  Raufaste, N. J., Jr.
• NIST Centennial Celebration - Crystallographic Highlights .
  American Crystallographic Association Newsletter, No. 4, 22-31, 2000.
  Hubbard, C. R.; Peiser, S.; Siegrist, T.; Levenson, M.; DeTitta, G.; Enright, G.; Gabe, E.; Evans, H.; Finger, L.; Lide, D. R.; Reimann, C. W.; Gilliland, G. L.; Armstrong, J. T.; Piermarini, G. J.; Long, G. G.; Gallagher, T.; Vanderah, T. A.; Munro, R. G.; Block, S.; Roth, R. S.; Ondik, H.; McMurdie, H. F.; Cook, L. P.; Wong-Ng, W.; Mathew, M.; Barnes, J. D.; Chow, L. C.; Takagi, S.; Cahn, J. W.; Bendersky, L. A.; Prince, E.; Santoro, A.; Lynn, J. W.; Karen, V. L.; Mighell, A. D.; Stutzman, P. E.
• NIST Centennial Celebration - Crystallographic Highlights .
  American Crystallographic Association Newsletter, No. 4, 22-31, 2000.
  Hubbard, C. R.; Peiser, S.; Siegrist, T.; Levenson, M.; DeTitta, G.; Enright, G.; Gabe, E.; Evans, H.; Finger, L.; Lide, D. R.; Reimann, C. W.; Gilliland, G. L.; Armstrong, J. T.; Piermarini, G. J.; Long, G. G.; Gallagher, T.; Vanderah, T. A.; Munro, R. G.; Block, S.; Roth, R. S.; Ondik, H.; McMurdie, H. F.; Cook, L. P.; Wong-Ng, W.; Mathew, M.; Barnes, J. D.; Chow, L. C.; Takagi, S.; Cahn, J. W.; Bendersky, L. A.; Prince, E.; Santoro, A.; Lynn, J. W.; Karen, V. L.; Mighell, A. D.; Stutzman, P. E.
• NIST Construction Automation Initiative.
  NISTIR 5856; May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. Chapter One: Topical Lectures. Paper 1.3. March 20-31, 1995, 13-21 pp, 1995.
  Stone, W. C.
• NIST Construction Automation Program Report No. 1: Non-Line-of-Sight (NLS) Construction Metrology.
  NISTIR 5825; 217 p. February 1996.
  Stone, W. C.
• NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995.
  NISTIR 5856; 156 p. May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995, 1996.
  Stone, W. C.
• NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995.
  NISTIR 5856; 156 p. May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. March 20-31, 1995, 1996.
  Stone, W. C.
• NIST Construction Automation Program Report No. 3: Electromagnetic Signal Attenuation in Construction Materials.
  NISTIR 6055; 199 p. October 1997.
  Stone, W. C.
• NIST Construction Automation Program Report No. 4: Non-Intrusive Scanning Technology for Construction Status Determination.
  NISTIR 6457; 98 p. January 2000.
  Cheok, G. S.; Lipman, R. R.; Witzgall, C.; Bernal, J.; Stone, W. C.
• NIST Green Building Program.
  NIST SP 863; June 1994.National Institute of Standards and Technology and the U.S. Green Building Council (USGBC). U.S. Green Building Conference, 1994. February 16-17, 1994, Gaithersburg, MD, Fanney, A. H.; Whitter, K. M.; Traugott, A. E.; Simon, L. N., Editor(s)(s), 42-54 pp, 1994.
  Hill, J. E.
• NIST LADAR Performance Evaluation Workshop, 2nd Proceedings. March 15-16, 2005.
  NISTIR 7266; October 2005.NIST LADAR Performance Evaluation Workshop, 2nd Proceedings. March 15-16, 2005, Gaithersburg, MD, 67 pp, 2005.
  Cheok, G. S.
• NIST Multizone Modeling Website.
  NISTIR 6728; 26 p. April 2001.
  Dols, W. S.
• NIST-NOAA Resilient Communities Cooperative Initiative and Its Contribution to Coastal Community Resilience.
  Marine Technology Society Journal, Vol. 41, No. 1, 26-32, Spring 2007.
  Gaynor, J.; Simiu, E.
• NIST/NRC-Canada Interlaboratory Comparison of Guarded Hot Plate Measurements: 1993-1997.
  NISTIR 6087; 11 p. December 1997.
  Zarr, R. R.; Kumaran, M. K.; Lagergren, E. S.
• NIST/NRC-Canada Interlaboratory Comparison of Guarded Hot Plate Measurements: 1993-1997.
  NISTIR 6087; 11 p. December 1997.
  Zarr, R. R.; Kumaran, M. K.; Lagergren, E. S.
• NIST Report for the MSU Epicenter.
  NIST GCR 01-807; 155 p. September 2000.
  Williams, K.; Berkebile, B.; McLennan, J.; Achelpohl, K.; Svec, P.
• NIST Research Program on the Seismic Resistance of Partially-Grouted Masonry Shear Walls.
  NISTIR 5481; 110 p. June 1994.
  Schultz, A. E.
• NIST Research Toward Construction Site Integration and Automation.
  Journal of Aerospace Engineering, Vol. 12, No. 2, 50-64, April 1999.
  Stone, W. C.; Reed, K. A.; Chang, P.; Pfeffer, L. E.; Jacoff, A.
• NIST Response to September 11.
  NISTIR 6890; September 2002.Fire Resistance Determination and Performance Prediction Research Needs Workshop: Proceedings. Appendix III. Presentations: A. February 19-20, 2002, Gaithersburg, MD, Grosshandler, W. L., Editor(s), 39-41 pp, 2002.
  Sunder, S. S.
• NIST Tutorial/Workshop on Lattice Gas and Boltzmann Methods, Gaithersburg, MD, August 21-23, 1995. Conference Report.
  Journal of the National Institute of Standards and Technology, Vol. 101, No. 5, 705-706, September/October 1996.
  Martys, N. S.
• NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures, Proceedings, January 7-8, 1998, Tucson, Arizona.
  NISTIR 6288; 156 p. February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures, Proceedings, Janaury 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 1999.
  Duthinh, D.
• Noise-Induced Sensitivity to Initial Conditions.
  Fluctuations and Order: The New Synthesis. Proceedings. Chapter 6. 1996, Springer, New York, NY, Millonas, M., Editor(s), 81-90 pp, 1996.
  Simiu, E.; Frey, M. R. R.
• Noise-Induced Snap-Through of a Buckled Column With Continuously Distributed Mass: A Chaotic Dynamics Approach.
  International Journal of Non-Linear Mechanics, Vol. 31, No. 6, 861-869, 1996.
  Franaszek, M.; Simiu, E.
• Noise-Induced Transitions to Chaos.
  Santa Fe Institute. Spatio-Temporal Patterns in Nonequilibrium Complex Systems. NATO Advanced Research Workshop. Proceedings. Volume 21. SFI Studies in the Sciences of Complexity. 1995, Addison-Wesley Publishing Co., Cladis, P. E.; Palffy-Muhoray, P., Editor(s)(s), 529-544 pp, 1995.
  Frey, M. R.; Simiu, E.
• Nondestructive Techniques to Investigate Corrosion Status in Concrete Structures.
  Journal of Performance of Constructed Facilities, Vol. 13, No. 3, 96-106, August 1999.
  Carino, N. J.
• Nondestructive Testing of Concrete: History and Challenges.
  American Concrete Institute (ACI). Concrete Technology: Past, Present and Future. ACI SP-144. 1994, American Concrete Inst., Detroit, MI, 623-678 pp, 1994.
  Carino, N. J.
• Nondestructive Test Methods.
  Concrete Construction Engineering Handbook. Chapter 19, CRC Press, Boca Raton, FL, Nawy, E. G., Editor(s), 19/1-68 pp, 1997.
  Carino, N. J.
• Non-Gaussian Noise Effects on Reliability of Multistable Systems.
  American Society of Mechanical Engineers (ASME). Proceedings of the 12th International Conference on Offshore Mechanics and Arctic Engineering (OMAE) 1993. Volume 2. Safety and Reliability. June 20-24, 1993, Glasgow, Scotland, Soares, C. G.; Baker, M. J.; Labeyrie, J.; Lacasse, S., Editor(s)(s), 65-71 pp, 1993.Journal of Offshore Mechanics and Arctic Engineering, Vol. 117, No. 3, 166-170, August 1995.
  Simiu, E.; Grigoriu, M.
• Non-Intrusive Scanning Technology for Construction Assessment.
  Automation and Robotics in Construction, 16th IAARC/IFAC/IEEE International Symposium. ISARC'99. Proceedings. September 22-24, 1999, Madrid, Spain, Universidad Carlos III de Madrid (UC3M), Spain, Balaguer, C., Editor(s), 645-650 pp, 1999.
  Cheok, G. S.; Stone, W. C.
• Non-Osmotic Blister Growth Model in Coating Systems.
  Damage and Failure of Interfaces (DFI-1), 1st International Conference. Proceedings. September 22-24, 1997, Vienna, Austria, A.A.Balkema Publishers, Brookfield, VT, Rossmamith, H., Editor(s), 203-209 pp, 1997.
  Chuang, T. J.; Nguyen, T.
• Northridge Earthquake: Lifeline Performance and Post-Earthquake Response.
  NIST GCR 97-712; 336 p. April 1997.
  Schiff, A. J.
• Novel Extreme Value Estimation Procedures: Application to Extreme Wind Data.
  Extreme Value Theory and Applications, Proceedings. Volume 1. 1994, Kluwer Academic Publishers, Boston, MA, Galambos, J., Editor(s), 139-158 pp, 1994.
  Gross, J. L.; Heckert, N. A.; Lechner, J. A.; Simiu, E.
• Numerical Methods for Computing Interfacial Mean Curvature.
  Computational Materials Science, Vol. 4, 103-116, 1995.
  Bullard, J. W.; Garboczi, E. J.; Carter, W. C.; Fuller, E. R., Jr.
• Numerical Simulation of Hydrodynamic Dispersion in Random Porous Media.
  Journal of Chromatography A, Vol. 707, 35-43, 1995.
  Martys, N. S.
• Numerical Test of Air Void Spacing Equations.
  Advanced Cement Based Materials, Vol. 8, 28-44, 1998.
  Snyder, K. A.

O

• Occupant Behavior, Egress, and Emergency Communications. World Trade Center Investigation Status.
  Project 7;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 33 pp, 2004.
  Averill, J. D.
• Offline Path Planning of Cooperative Manipulators Using Co-Evolutionary Genetic Algorithm.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 415-424 pp, 2002.
  Ajmal Deen Ali, M. S.; Babu, N.; Varghese, K.
• On-Board Data Management Structure for Advanced Construction Machine Support.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 409-414 pp, 2002.
  Jurasz, J.; Ligier, A.; Horn, A.; Wendebaum, J.
• On-Line Monitoring and Fault Detection of Control System Performance.
  CLIMA 2000 Conference, Proceedings. August 30-September 2, 1997, Brussels, Belgium, 1-20 pp, 1997.
  Seem, J. E.; House, J. M.; Monroe, R. H.
• On-Line Monitoring and Fault Detection.
  ASHRAE Journal, Vol. 41, No. 7, 21-26, July 1999.
  Seem, J. E.; House, J. M.; Monroe, R. H.
• On the Validity of the Adiabatic Spreading Assumption in Droplet Impact Cooling.
  International Journal of Heat and Mass Transfer, Vol. 44, No. 20, 3869-3881, October 2001.
  Healy, W. M.; Hartley, J. G.; Abdel-Khalik, S. I.
• Optical Reflectance of Metallic Coatings: Effect of Aluminum Flack Orientation.
  Journal of Coatings Technology, Vol. 74, No. 932, 55-63, September 2002.
  Sung, L. P.; Nadal, M. E.; McKnight, M. E.; Marx, E.; Laurenti, B.
• Optimal Control of an Excavator Bucket Positioning.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 481-488 pp, 2002.
  Budny, E.; Chlosta, M.; Gutkowski, W.
• Optimal Pricing of Publicly Supplied Private Goods: A Case Study of NIST Standard Reference Materials.
  NISTIR 6302; 154 p. June 1999.
  Fuller, S. K.
• Optimal Pricing of Publicly Supplied Private Goods: A Case Study of the Pricing of NIST Standard Reference Materials.
  UMI Number 9817619; Thesis; 209 p. January 30, 1998.
  Fuller, S. K.
• Optimization of Finned-Tube Condensers Using an Intelligent System.
  International Journal of Refrigeration, Vol. 30, No. 3, 482-488, May 2007.
  Domanski, P. A.; Yashar, D. A.
• Optimization of Polymer Concrete Composites. Final Report.
  NISTIR 6361; 63 p. August 1999.
  Czarnecki, L.; Garbacz, A.; Lukowski, P.; Clifton, J. R.
• Optimized Design of Finned-Tube Evaporators Using the Learnable Evolution Model.
  HVAC&R Research, Vol. 10, No. 2, 201-211, April 2004.
  Domanski, P. A.; Yashar, D. A.; Kaufman, K. A.; Michalski, R. S.
• Overview of Building Diagnostics.
  National Conference on Building Commissioning. Proceedings. May 3-5, 2000, Kansas City, MO, 2000. AND Diagnostics for Commercial Buildings: Research to Practive. Proceedings. June 16-17, 1999, San Francisco, CA, 16-17 pp, 1999, 1-9 pp, 2000.
  House, J. M.; Kelly, G. E.
• Overview of Building Diagnostics.
  National Conference on Building Commissioning. Proceedings. May 3-5, 2000, Kansas City, MO, 2000. AND Diagnostics for Commercial Buildings: Research to Practive. Proceedings. June 16-17, 1999, San Francisco, CA, 16-17 pp, 1999, 1-9 pp, 2000.
  House, J. M.; Kelly, G. E.

P

• Parameters Affecting the Performance of a Residential-Scale Stationary Fuel Cell System.
  Fuel Cell Science, Engineering and Technology. FUELCELL2005, 3rd International Conference. Proceedings. May 23-25, 2005, Ypsilanti, MI, 1-9 pp, 2005.
  Davis, M. W.; Fanney, A. H.; LaBarre, M. J.; Henderson, K. R.; Dougherty, B. P.
• Parameters Affecting the Performance of a Residential-Scale Stationary Fuel Cell System.
  ASME Journal of Fuel Cell Science and Technology, Vol. 4, No. 2, 109-115, May 2007.
  Davis, M. W.; Fanney, A. H.; LaBarre, M. J.; Henerson, K. R.; Dougherty, B. P.
• Parametric Study of Wall Moisture Contents Using a Revised Variable Indoor Relative Humidity Version of the "MOIST" Transient Heat and Moisture Model.
  U.S. Department of Energy (DOE); Oak Ridge National Laboratory (ORNL); American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE); Building Environment and Thermal Envelope Council (BETEC). Thermal Performance of the Exterior Envelopes of Buildings VI Conference. Proceedings. Thermal VI. December 4-8, 1995, Clearwater Beach, FL, 307-319 pp, 1995.
  Tsongas, G. A.; Burch, D. M.; Roos, C.; Cunningham, M.
• Parametric Study of Wall Moisture Contents Using a Revised Variable Indoor Relative Humidity Version of the "MOIST" Transient Heat and Moisture Model.
  U.S. Department of Energy (DOE); Oak Ridge National Laboratory (ORNL); American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE); Building Environment and Thermal Envelope Council (BETEC). Thermal Performance of the Exterior Envelopes of Buildings VI Conference. Proceedings. Thermal VI. December 4-8, 1995, Clearwater Beach, FL, 307-319 pp, 1995.
  Tsongas, G. A.; Burch, D. M.; Roos, C.; Cunningham, M.
• Particle Size Analysis by Laser Diffraction Spectrometry: Application to Cementitious Powders.
  NISTIR 7097; 70 p. March 2004.
  Hackley, V. A.; Lum, L. S.; Gintautas, V.; Ferraris, C. F.
• Partnership for a National Computer-Integrated Knowledge Systems Network for High-Performance Construction Materials and Systems: Workshop Report.
  NISTIR 6003; 58 p. March 1997.
  Clifton, J. R.; Sunder, S. S.
• Partnership for the Advancement of Infrastructure and Its Renewal Through Innovative Technologies (PAIR) White Paper.
  NIST GCR 98-765; 24 p. September 1998.
  Civil Engineering Research Foundation
• Partnership for the Advancement of Infrastructure and Its Renewal Through Innovative Technologies Transportation Component (PAIR-T) White Paper.
  NIST GCR 98-766; 22 p. September 1998.
  Civil Engineering Research Foundation
• Parts and Packets Unification for Construction Automation and Robots.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 311-316 pp, 2002.
  Umetani, T.; Arai, T.; Mae, Y.; Inoue, K.; Maeda, J.
• Passive Energy Dissipation Devices for Seismic Applications.
  NISTIR 5923; 59 p. November 1996.
  Sadek, F.; Mohraz, B.; Taylor, A. W.; Chung, R. M.
• Passive Fire Protection. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-6A; 326 p. September 2005.
  Carino, N. J.; Starnes, M. A.; Gross, J. L.; Yang, J. C.; Kukuck, S. R.; Prasad, K. R.; Bukowski, R. W.
• Past, Present, and Future of Computational Materials Science of Concrete.
  Materials Science of Concrete Workshop (in honor of J. Francis Young). Proceedings. Center for Advanced-Cement-Based Materials (ACBM). April 27-29, 2000, Lake Shelbyville, IL, 1-10 pp, 2000.
  Garboczi, E. J.; Bentz, D. P.; Frohnsdorff, G. J. C.
• Pattern Fitting for Quantitative X-Ray Powder Diffraction Analysis of Portland Cement and Clinker.
  International Conference on Cement Microscopy, 18th. International Microscopy Association. Proceedings. April 21-25, 1996, Houston, TX, Intl. Cement Microscopy Assoc., Duncanville, TX, Jany, L.; Nisperos, A.; Bayles, J., Editor(s)(s), 18-28 pp, 1996.
  Stutzman, P. E.
• Peak Non-Gaussian Wind Effects for Database-Assisted Low-Rise Building Design.
  Journal of Engineering Mechanics, Vol. 128, No. 5, 530-539, May 2002.
  Sadek, F.; Simiu, E.
• Pentagon Building Performance Report.
  ; 82 p. January 2003.
  Mlakar, P. F.; Dusenberry, D. O.; Harris, J. R.; Haynes, G.; Phan, L. T.; Sozen, M. A.
• Percolation Aspects of Cement Paste and Concrete: Properties and Durability.
  High-Performance Concrete: Research to Practice. American Concrete Institute Spring Convention. Proceedings. ACI Special Publication 189. March 14-19, 1999, Chicago, IL, 147-164 pp, 1999.
  Garboczi, E. J.; Bentz, D. P.
• Performance Analysis of Next-Generation LADAR for Manufacturing, Construction, and Mobility.
  NISTIR 7117; 198 p. May 2004.
  Stone, W. C.; Juberts, M.; Dagalakis, N.; Stone, J.; Gorman, J.
• Performance and Characterization of Building Integrated Photovoltaic Panels.
  IEEE Photovoltaic Specialists Conference (PVSC), 21st. Proceedings. May 20-24, 2002, New Orleans, LA, 1-4 pp, 2002.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Performance Approach to Construction Goals.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 2. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Inst., Haifa, Israel, 2/1-10 pp, 1996.
  Wright, R. N.
• Performance Based Design for Port Structures.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 84-96 pp, 1998.
  Iai, S.; Ichii, K.
• Performance Evaluation of Chlorine Free Zeotropic Refrigerant Mixtures in Heat Pumps.
  International Institute of Refrigeration. Proceedings. July 1992, 1992.
  Pannock, J.; Didion, D. S.; Radermacher, R.
• Performance Evaluation of Two Azeotropic Refrigerant Mixtures of HFC-134a With R-290 (Propane) and R-600a (Isobutane).
  ASME Journal of Energy Resources Technology, Vol. 116, 148-154, June 1994.
  Kim, M. S.; Mulroy, W. J.; Didion, D. A.
• Performance: Imperative for Safety,Security and Competitiveness in the 21st Century.
  Strategies for Performance in the Aftermath of the World Trade Center. CIB-CTBUH Conference on Tall Buildings. Proceedings. Task Group on Tall Buildings: CIB TG50. CIB Publication No. 290. October 20-23, 2003, Kuala Lumpur, Malaysia, Shafii, F.; Bukowski, R.; Klemencic, R., Editor(s)(s), 7-18 pp, 2003.
  Snell, J. E.
• Performance of 1/3-Scale Model Precast Concrete Beam-Column Connections Subjected to Cyclic Inelastic Loads. Report No. 4.
  NISTIR 5436; 65 p. June 1994.
  Cheok, G. S.; Stone, W. C.
• Performance of a Commercial Hot Water Boiler.
  NISTIR 6226; 22 p. November 1998.
  Park, C.; Liu, S. T.
• Performance of a Finned-Tube Evaporator Optimized for Different Refrigerants and Its Effect on System Efficiency.
  International Journal of Refrigeration, Vol. 28, No. 6, 820-827, September 2005.
  Domanski, P. A.; Yashar, D. A.; Kim, M.
• Performance of a Residential Heat Pump Operating in the Cooling Mode With Single Faults Imposed.
  NISTIR 7350; 173 p. September 2006.
  Kim, M.; Payne, W. V.; Domanski, P. A.; Hermes, C. J. L.
• Performance of Artificial Intelligence Approach on Bridge Coating Assessment.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 331-336 pp, 2002.
  Chen, P. O.; Chang, L. M.
• Performance of Chlorine-Free Binary Zeotropic Refrigerant Mixtures in a Heat Pump.
  NISTIR 4748; 87 p. December 1992.
  Pannock, J.; Didion, D. A.
• Performance of Compact Fluorescent Lamps at Different Ambient Temperatures.
  Journal of the Illuminating Engineering Society, Vol. 23, No. 2, 72-84, Summer 1994.
  Collins, B. L.; Treado, S. J.; Ouellette, M. J.
• Performance of Federal Buildings in the January 17, 1994 Northridge Earthquake.
  NISTIR 5574; 25 p. January 1995.
  Todd, D. R.; Bieniawski, A. S.
• Performance of HC and HFC Refrigerants in a Finned-Tube Evaporator and Its Effect on System Efficiency.
  Natural Working Fluids Conference, 6th IIR Gustave Lorentzen. Proceedings. August 29-September 1, 2004, Glasgow, UK, 1-8 pp, 2004.International Journal of Refrigeration, Vol. 28, No. 6, 820-827, September 2005.
  Domanski, P. A.; Yashar, D. A.; Kim, M. S.
• Performance of HUD-Affiliated Properties During the January 17, 1994 Northridge Earthquake.
  NISTIR 5488; 66 p. August 1994.
  Todd, D. R.; Anderson, E.; Carino, N. J.; Cheok, G. S.; Chung, R. M.; Gross, J. L.; Phan, L. T.; Schultz, A. E.; Shenton, H. W., III; Taylor, A. W.; Yancey, C. W. C.
• Performance of Hybrid Moment-Resisting Precast Beam-Column Concrete Connections Subjected to Cyclic Loading.
  Title 92-S22;ACI Structural Journal, Vol. 91, No. 2, 229-249, March/April 1995.
  Stone, W. C.; Cheok, G. S.; Stanton, J. F.
• Performance of Physical Structures in Hurricane Katrina and Hurricane Rita: A Reconnaissance Report.
  NIST TN 1476; NIST Technical Note 1476; 263 p. June 2006.
  National Institute of Standards and Technology
• Performance of Polyvinyl Chloride (PVC) Roofing: Results of a Ten-Year Field Study.
  Challenges of the 21st Century. Roofing Technology, Fourth (4th) International Symposium. Proceedings. First (1st) Edition. U.S. National Institute of Standards and Technology, U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, 253-264 pp, 1997.
  Bailey, D. M.; Foltz, S. D.; Rossiter, W. J., Jr.; Lechner, J. A.
• Performance of Polyvinyl Chloride Roofing: An Overview.
  Sustainable Low-Slope Roofing Workshop Proceedings. Oak Ridge National Laboratory. October 9-10, 1996, Oak Ridge, TN, 15-29 pp, 1997.
  Rossiter, W. J., Jr.; Paroli, R. M.
• Performance of R-22 Alternative Refrigerants in a System With Cross-Flow and Counter-Flow Heat Exchangers.
  NISTIR 5945; 31 p. January 1997.
  Kim, M. H.; Domanski, P. A.; Didion, D. A.
• Performance of R-22 and Its Alternatives Working at High Outdoor Temperatures.
  Refrigeration Conference, 8th International. Proceedings. July 25-28, 2000, West Lafayette, IN, 47-54 pp, 2000.
  Motta, S. F. Y.; Domanski, P. A.
• Performance of Tape-Bonded Seams of EPDM Membranes: Comparison of the Peel Creep-Rupture Response of Tape-Bonded and Liquid-Adhesive Bonded Seams.
  NIST BSS 175; 67 p. May 1996.
  Rossiter, W. J., Jr.; Vangel, M. G.; Embree, E. J.; Kraft, K. M.; Seiler, J. F., Jr.
• Performance of Tape-Bonded Seams of EPDM Membranes: Effect of Material and Application Factors on Peel Creep-Rupture Response.
  NIST BSS 176; 59 p. May 1997.
  Rossiter, W. J., Jr.; Vangel, M. G.; Kraft, K. M.; Filliben, J. J.
• Performance of Tape-Bonded Seams of EPDM Membranes: Factors Affecting the Creep-Rupture Response of Tape-Bonded and Liquid-Adhesive-Bonded Seams.
  NIST BSS 177; 54 p. July 1998.
  Rossiter, W. J., Jr.; Vangel, M. G.; Kraft, K. M.
• Performance of Tape-Bonded Seams of EPDM Membranes: The Effect of Load on Peel-Creep.
  Challenges of the 21st Century. Roofing Technology, Fourth (4th) International Symposium. Proceedings. First (1st) Edition. U.S. National Institute of Standards and Technology, U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, 1-13 pp, 1997.
  Rossiter, W. J., Jr.; Vangel, M. G.; Kraft, K. M.; Embree, E. J.
• Performance Standards for Dwellings Advancements and Opportunities Nationally and Internationally.
  NCSBCS/NIST Joint Technical and Research Conference. Proceedings. September 3, 1997, Reston, VA, 1-12 pp, 1997.
  Zingeser, J. P.
• Performance Testing of a Family of Type I Combination Appliances.
  NISTIR 5626; 30 p. April 1995.
  Liu, S. T.; Kelly, G. E.; Terlizzi, C. P.
• Performance Testing of Alternative Blowing Agents for Foam Insulation of Residential Water Heaters.
  Appliance Manufacturer Conference and Exposition (AMCE). Proceedings. September 27-29, 1999, Nashville, TN, 293-303 pp, 1999.
  Fanney, A. H.; Zarr, R. R.
• Perimeter Safety Net Projection Requirements.
  NBSIR 85-3271; 60 p. May 1986.
  Yancey, C. W. C.; Carino, N. J.; Sansalone, M.
• Phase Composition Analysis of the NIST Reference Clinkers by Optical Microscopy and X-Ray Powder Diffraction.
  NIST TN 1441; 49 p. September 2002.
  Stutzman, P. E.; Leigh, S.
• Phase Space Flux Ratio as a Measure of Relative Stability.
  Computation of Stochastic Mechanics, 2nd International Conference. Proceedings. June 13-15, 1994, Athens, Greece, Balkema, Rotterdam, Spanos, P. D., Editor(s), 113-120 pp, 1995.
  Frey, M. R.; Simiu, E.
• Phase Space Transport and Control of Escape From a Potential Well.
  Physica D, Vol. 95, 128-143, 1996.
  Frey, M. R. R.; Simiu, E.
• Photoconductivity Technique for the Assessment of Pigment Photoreactivity.
  Federation of Societies for Coatings Technology (FSCT) Technical Program Annual Meeting, 81st. November 12-14, 2003, Philadelphia, PA, Federation of Societies for Coatings Technology, Blue Bell, PA, 2003.
  Chin, J.; Scierka, S.; Kim, T.; Forster, A.
• Photovoltaic Solar Water Heating System.
  International Solar Energy Conference. Proceedings. American Society of Mechanical Engineers. March 31-April 3, 1996, San Antonio, TX, 1-10 pp, 1996.ASME Journal of Solar Energy Engineering, Vol. 119, 126-133, May 1997.
  Fanney, A. H.; Dougherty, B. P.
• Photovoltaic Solar Water Heating System.
  International Solar Energy Conference. Proceedings. American Society of Mechanical Engineers. March 31-April 3, 1996, San Antonio, TX, 1-10 pp, 1996.ASME Journal of Solar Energy Engineering, Vol. 119, 126-133, May 1997.
  Fanney, A. H.; Dougherty, B. P.
• Physical Properties of Alternatives to the Fully Halogenated Chlorofluorocarbons.
  National Aeronautics and Space Admin.; United Kingdom Department of the Environment; National Oceanic and Atmospheric Admin.; United Nations Environment Program; World Meteorological Organization. Scientific Assessment of Stratospheric Ozone: 1989. Volume 2. Appendix: Alternative Fluorocarbon Environmental Acceptability Study (AFEAS) Report. World Meteorological Organization Global Ozone Research and Monitoring Project. Report 20. May 1989, Boulder, CO, 11-38 pp, 1989.
  McLinden, M. O.
• Physical Properties of Structural Steels. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-3E; 162 p. September 2005.
  Banovic, S. W.; McCowan, C. N.; Luecke, W. E.
• PIEBASE Roadmap to Achieve Industry Vision for Information Exchange and Sharing.
  PIEBASE (Process Industry Executive for achieving Business Advantage using Standards for data Exchange) Working Group 5 With Contributions From America, Europe and Japan. Proceedings. Version 1.0. Issued October 1, 1997, 1-21 pp, 1997.
  Palmer, M. E.; Halford, J. D.
• Plant Spatial Configuration Application Protocol. Version 1.0. Volume 2.
  NISTIR 5812; 292 p. December 1995.
  Kline, S. W.; Palmer, M. E.; Burkett, W.; Craig, D.; Skeels, J. A.
• Plant Spatial Configuration Application Protocol. Version 1.1.
  NISTIR 6005; 1099 p. April 1997.
  Kline, S. W.; Palmer, M. E.; Burkett, W.; Craig, D.; Skeels, J. A.
• Plumbing Manual. Report of Subcommittee on Plumbing Central Housing Committee on Research, Design, and Construction.
  BMS 66; 72 p. November 22, 1940.
  National Bureau of Standards
• Polymer Composites for Repairing of Portland Cement Concrete: Compatibility Project.
  NISTIR 6394; 87 p. November 1999.
  Czarnecki, L.; Garbacz, A.; Lukowski, P.; Clifton, J. R.
• Pore Scale Modeling of Fluid Transport Using Lattice Boltzmann Methods.
  Materials Science of Concrete Special Volume: Ion and Mass Transport in Cement-Based Materials. Proceedings. American Ceramic Society. October 4-5, 1999, Toronto, Canada, 239-252 pp, 2001.
  Martys, N. S.; Hagedorn, J. G.; Devaney, J. E.
• Positron Studies of Polymeric Coatings.
  Radiation Physics and Chemistry, Vol. 68, No. 3/4, 395-402, October/November 2003.
  Jean, Y. C.; Mallon, P. E.; Zhang, R.; Chen, H.; Li, Y.; Zhang, J.; Wu, Y. C.; Sandreczki, T. C.; Suzuki, R.; Ohdaira, T.; Gu, X.; Nguyen, T.
• Post-Earthquake Fire and Lifelines Workshop; Long Beach, California, January 30-31, 1995. Proceedings.
  NIST SP 889; 55 p. August 1995.
  Chung, R. M.; Jason, N. H.; Mohraz, B.; Mowrer, F. W.; Walton, W. D.
• Post-Installed Anchors: A Literature Review.
  NISTIR 6096; 106 p. January 1998.
  Cheok, G. S.; Phan, L. T.
• Post-Occupancy Evaluation of the Forrestal Building. January 1993-December 1994.
  NISTIR 5591; 67 p. March 1995.
  Sanders, P. A.; Collins, B. L.
• Potential Benefits of Smart Refrigerant Distributors. Final Report.
  ARTI-21CR/605-200-50-01; 196 p. December 2002.
  Payne, W. V.; Domanski, P. A.
• Potential Coefficient of Performance Improvements Due to Glide Matching With R-470C.
  International Refrigeration Conference at Purdue, 7th. Proceedings. July 14-17, 1998, West Lafayette, IN, 1998.
  Marques, M. E.; Domanski, P. A.
• Practical Fin Shapes for Surface-Tension-Drained Condensation.
  Journal of Heat Transfer, Vol. 112, 479-485, May 1990.
  Kedzierski, M. A.; Webb, R. L.
• Precision of Marshall Stability and Flow Test Using 6-in. (152.4-mm) Diameter Specimens.
  Journal of Testing and Evaluation (JTEVA), Vol. 24, No. 1, 20-25, January 1996.
  Kandhal, P. S.; Wu, Y.; Parker, F., Jr.; Spellerberg, P. A.
• Predicting Service Life of Chloride-Exposed Steel-Reinforced Concrete.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.9. November 9-10, 1998, 15-17 pp, 1999.
  Bentz, D. P.
• Predicting the Performance of Concrete Repair Materials. Summary of Workshop April 26 and 27, 1999, Durham, New Hampshire.
  NISTIR 6402; 39 p. January 2000.
  Vaysburd, A. M.; Carino, N. J.; Bissonette, B.
• Predicting the Service Lives of Materials of Construction.
  Materials for the New Millennium. Proceedings. Materials Engineering Conference, 4th. Volume 1. American Society of Civil Engineers (ASCE). November 10-14, 1996, Washington, DC, American Society of Civil Engineers, New York, NY, Chong, K. P., Editor(s), 38-53 pp, 1996.
  Frohnsdorff, G. J. C.
• Predicting the Service Lives of Materials of Construction.
  Materials for the New Millennium. Proceedings. Materials Engineering Conference, 4th. Volume 1. American Society of Civil Engineers (ASCE). November 10-14, 1996, Washington, DC, American Society of Civil Engineers, New York, NY, Chong, K. P., Editor(s), 38-53 pp, 1996.
  Frohnsdorff, G. J. C.
• Prediction of Adiabatic Temperature Rise in Conventional and High-Performance Concretes Using a 3-D Microstructural Model.
  Cement and Concrete Research, Vol. 28, No. 2, 285-297, 1998.
  Bentz, D. P.; Waller, V.; deLarrard, F.
• Prediction of Blistering in Coating Systems.
  Organic Coatings for Corrosion Control. ACS Symposium Series No. 689. Proceedings. American Chemical Society. Chapter 11. April 1998, Washington, DC, Bierwagen, G. P., Editor(s), 137-150 pp, 1998.
  Pommersheim, J. M.; Nguyen, T.
• Prediction of Building Integrated Photovoltaic Cell Temperatures.
  Solar Energy: The Power to Choose. Forum 2001. April 21-25, 2001, Washington, DC, 2001.ASME Journal of Solar Energy Engineering, Special Issue: Solar Thermochemical Processing, Vol. 123, No. 2, 200-210, August 2001.
  Davis, M. W.; Dougherty, B. P.; Fanney, A. H.
• Prediction of Cement Physical Properties by Virtual Testing.
  Process Technology of Cement Manufacturing, Fifth (5th) International VDZ Congress. VDZ Confress 2002. Proceedings. September 23-27, 2002, Dusseldorf, Germany, 53-63 pp, 2003.Cement International, Vol. 1, No. 3, 86-92, 2003.
  Haecker, C. J.; Bentz, D. P.; Fen, X. P.; Stutzman, P. E.
• Prediction of Cement Physical Properties by Virtual Testing.
  Process Technology of Cement Manufacturing, Fifth (5th) International VDZ Congress. VDZ Confress 2002. Proceedings. September 23-27, 2002, Dusseldorf, Germany, 53-63 pp, 2003.Cement International, Vol. 1, No. 3, 86-92, 2003.
  Haecker, C. J.; Bentz, D. P.; Fen, X. P.; Stutzman, P. E.
• Prediction of Cracking in Reinforced Concrete Structures.
  NISTIR 5634; 53 p. April 1995.
  Carino, N. J.; Clifton, J. R.
• Prediction of Hurricane Wind Speeds in the United States.
  Journal of Structural Engineering, 1549-1550, November 1997.
  Simiu, E.
• Preliminary Guidelines for Liquefaction Assessment Using Shear Wave Velocity.
  NIST SP 904; August 1996.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 28th. May 14-17, 1996, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 77-83 pp, 1996.
  Andrus, R. D.; Stokoe, K. H., II
• Preliminary Observations of Water Movement in Cement Pastes During Curing X-Ray Absorption.
  Cement and Concrete Research, Vol. 30, No. 7, 1157-1168, July 2000.
  Bentz, D. P.; Hansen, K. K.
• Preliminary Performance Criteria for Bituminous Membrane Roofing. Building Science Series.
  NBS BSS 055; November 1974.
  Mathey, R. G.; Cullen, W. C.
• Preliminary Processing of the Lotung LSST Data.
  NIST GCR 96-690; 57 p. March 1996.
  Glaser, S. D.; Leeds, A. L.
• Present Limitations in Scientifically-Based Prediction Models for Chloride Ingress Into Submerged Concrete.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.3. November 9-10, 1998, 6-8 pp, 1999.
  Nilsson, L. O.
• Present Worth Factors for Life-Cycle Cost Studies in the Department of Defense (1996). Data for DoD Compliance With the Federal Methodology for Life-Cycle Cost Analysis, Title 10, CFR, Part 436, Subpart A, and OMB Circular A-94.
  NISTIR 4942-3; 60 p. October 1995.
  Petersen, S. R.
• Priority Agenda for Energy-Related Indoor Environmental Quality Research.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 984-989 pp, 2002.
  Fisk, W. J.; Brager, G.; Brook, M.; Burge, H.; Cole, J.; Cummings, J.; Levin, H.; Loftness, V.; Logee, T.; Mendell, M. J.; Persily, A. K.; Taylor, S.; Zhang, J.
• Probabilistic Estimates of Design Load Factors for Wind-Sensitive Structures Using the "Peaks Over Threshold" Approach.
  NIST TN 1418; 30 p. April 1996.
  Whalen, T. M.
• Proceedings of a Workshop on Developing and Adopting Seismic Design and Construction Standards for Lifelines.
  NISTIR 5907; 345 p. October 1996.
  Dikkers, R. D.; Chung, R. M.; Mohraz, B.; Lew, H. S.; Wright, R. N.
• Productivity Impacts in Building Life-Cycle Cost Analysis.
  NISTIR 4762; 29 p. February 1992.
  Lippiatt, B. C.; Weber, S. F.
• Programmer's Manual for the Fire Safety Evaluation System Cost Minimizer Computer Program.
  NBSIR 83-2749; 98 p. July 1983.
  Chapman, R. E.; Hall, W. G.
• Program of the Subcommittee on Construction and Building.
  NISTIR 5443-A; 41 p. July 1994.
  Wright, R. N.; Rosenfeld, A. H.; Fowell, A. J.
• Project on 3-D Full Scale Earthquake Testing Facility. First Report.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 55-68 pp, 1998.
  Ohtani, K.; Katayama, T.; Shibata, H.
• Project-Oriented Life-Cycle Costing Workshop for Energy Conservation in Buildings.
  NISTIR 6806; 239 p. September 2001.
  Fuller, S. K.; Rushing, A. S.; Meyer, G. M.
• Project Performance vs Use of Technologies at the Work Function Level.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 117-122 pp, 2002.
  O'Connor, J. T.; Yang, L. R.
• Project Summaries 1998: NIST Building and Fire Research Laboratory.
  NISTIR 6203; 240 p. July 1998.
  Raufaste, N. J., Jr.
• Properties and Cycle Performance of Refrigerant Blends Operating Near and Above the Refrigerant Critical Point. Task 2: Air Conditioner System Study. Final Report.
  ARTI-21CR/605-50010-01-Pt. 2; 151 p. September 2002.
  Domanski, P. A.; Payne, W. V.
• Proposed Format for Data on Cements in a Material Properties Database.
  NISTIR 6034; 23 p. June 1997.
  Kaetzel, L. J.; Galler, M. A.
• Proposed National Construction Safety Team Act.
  Fire Protection Strategies for 21st Century Building and Fire Codes Symposium. EXTENDED ABSTRACTS. Proceedings. Society of Fire Protection Engineers and American Institute of Architects. September 17-18, 2002, Baltimore, MD, 9-13 pp, 2002.
  Snell, J. E.
• Proposed Performance Criteria for Encapsulant Coatings for Lead Paint. Part 1. Abrasion Resistance.
  NISTIR 5901; 39 p. December 1996.
  Rossiter, W. J., Jr.; McKnight, M. E.; Roberts, W. E.; Kraft, K. M.
• Proposed Revisions of Part of the Test Procedures for Furnaces and Boilers in ASHRAE Standard 103-1993.
  NISTIR 6913; 28 p. September 2002.
  Liu, S. T.
• Proposed Testing Methodology and Laboratory Facilities for Evaluating Residential Fuel Cell Systems.
  NISTIR 6848; 13 p. January 2002.
  Davis, M. W.
• Proposed Testing Methodology and Laboratory Facilities for Evaluating Residential Fuel Cell Systems.
  NISTIR 6848; 13 p. January 2002.
  Davis, M. W.
• Proposed Test Methodology and Performance Rating Standard for Residential Fuel Cell Systems.
  NISTIR 7131; 85 p. June 2006.
  Davis, M. W.; Ellis, M. W.; Dougherty, B. P.
• Protected Paste Volume in Concrete Extension to Internal Curing Using Saturated Lightweight Fine Aggregate. Communication.
  Cement and Concrete Research, Vol. 29, No. 11, 1863-1867, 1999.
  Bentz, D. P.; Snyder, K. A.
• Protecting Steel at High Temperatures.
  Modern Steel Construction, Vol. 49, No. 10, 49-52, October 2009.
  Bentz, D. P.; White, C. C.
• Protective Coatings Research: A Look Ahead.
  Steel Structures Painting Council (SSPC). Technologies for a Diverse Industry. SSPC 1996 Seminars. Proceedings. SSPC 96-08. November 17-21, 1996, Charlotte, NC, 9-12 pp, 1996.
  McKnight, M. E.
• Prototype Computer-Integrated Knowledge System: Predicting Service Life of Chloride-Exposed Steel-Reinforced Concrete.
  Concrete International, 42-47, December 1996.
  Bentz, D. P.; Clifton, J. R.; Snyder, K. A.
• Prototype Implementation of an Automated Structural Steel Tracking System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 467-473 pp, 2002.
  Furlani, K. M.; Latimer, D. T.; Gilsinn, D. E.; Lytle, A. M.
• Public/Private Collaboration in Development and Implementation of Risk Reduction Practices.
  Insurance Institute for Property Loss Reduction. Evaluating Risks and Mitigating Losses: New Opportunities and New Challenges. Proceedings. Congress on Natural Disaster Loss Reduction, First (1st) Annual. June 17, 1994, Boston, MA, 15-19 pp, 1994.
  Wright, R. N.
• Pulsed Gradient NMR Measurements and Numerical Simulation of Flow Velocity Distribution in Sphere Packings.
  Physics of Fluids, Vol. 8, No. 2, 293-301, February 1996.
  Lebon, L.; Oger, L.; Leblond, J.; Hulin, J. P.; Martys, N. S.; Schwartz, L. M.
• Pumice Aggregates for Internal Water Curing.
  Concrete Science and Engienering: A Tribute to Arnon Bentur. Proceedings. International RILEM Symposium. March 22-24, 2004, Evanston, IL, 137-151 pp, 2004.
  Lura, P.; Bentz, D. P.; Lange, D. A.; Kovler, K.; Bentur, A.

Q

• Quantifying Water at the Organic Film/Hydroxylated Substrate Interface.
  Journal of Adhesion, Vol. 48, 169-194, 1995.
  Nguyen, T.; Byrd, W. E.; Bentz, D. P.
• Quantitative Comparison of Real and CEMHYD3D Model Microstructures Using Correlation Functions.
  Cement and Concrete Research, Vol. 36, No. 2, 259-263, February 2006.
  Bentz, D. P.
• Quantitative X-Ray Diffraction Analysis of Handmolded Brick.
  Foam Conservation of Historic Brick Structures. Chapter 11, Donhead Publishing Ltd., Shafesbury, UK, Baer, N. S.; Fritz, S.; Livingston, R. A., Editor(s)(s), 105-116 pp, 1998.
  Livingston, R. A.; Stutzman, P. E.; Schumann, I.
• Quest for Alternatives.
  ASHRAE Journal, 32-42, December 1987.
  McLinden, M. O.; Didion, D. A.
• Questioning the Linear Relationship Between Doorway Width and Achievable Flow Rate.
  Fire Safety Journal, Vol. 44, No. 1, 80-87, January 2009.
  Gwynne, S. M. V.; Kuligowski, E. D.; Kratchman, J.; Milke, J. A.

R

• R-22 Replacement Status.
  ASHRAE Journal, Vol. 46, No. 8, 29-39, August 2004.
  Calm, J. M.; Domanski, P. A.
• R-22 Replacement Status. (IN RUSSIAN)
  Journal of St. Petersburg State Academy of Refrigerating and Food Technologies, Russia, 28-36, February 2008.
  Calm, J. M.; Domanski, P. A.
• Ralph L. Webb: A Pioneering Proselytizer for Enhanced Heat Transfer.
  Enhanced Heat Transfer, Vol. 6, 71-78, 1999.
  Kedzierski, M. A.
• Rapid Human-Assisted Creation of Bounding Models for Obstacle Avoidance in Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 495-500 pp, 2002.
  McLaughlin, J. T.; Haas, C. T.; Kuaoum, J.; Sreenivasan, S. V.; Kwon, S.
• Rating of Mixed Split Residential Air Conditioners.
  Improving Building Energy Efficiency in Hot and Humid Climates, 5th Annual Symposium. Proceedings. September 13, 1988, Houston, TX, 1988.
  Domanski, P. A.
• Rating Water-Source Heat Pumps Using ARI Standard 320 and ISO Standard 13256-1.
  International Appliance Technical Conference. Proceedings. March 25-27, 2002, Lexington, KY, 2002.
  Payne, W. V.; Domanski, P. A.
• Rationale and Preliminary Plan for Federal Research for Construction and Building.
  NISTIR 5536; 138 p. November 1994.
  Wright, R. N.; Rosenfeld, A. H.; Fowell, A. J.

• 
  NIST SP 904; August 1996.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 28th. May 14-17, 1996, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 638 pp, 1996.
  Raufaste, N. J., Jr.
• 
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 588 pp, 1998.
  Raufaste, N. J., Jr.

R

• REACT: Reducing Early-Age Cracking Today.
  Concrete Plant International, No. 3, 56-61, 2008.
  Bentz, D. P.; Weiss, W. J.
• Real-Time GPS and Non-Line-of-Sight Metrology.
  NISTIR 5856; May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. Chapter One: Topical Lectures. Paper 1.5. March 20-31, 1995, 29-41 pp, 1995.
  Stone, W. C.
• Real-Time Hybrid Vibration Experiments With a 2-Degrees-of-Freedom Model.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 41-49 pp, 1998.
  Tamura, K.; Kobayashi, H.
• Recent Advances in Fire-Structure Analysis.
  Technical Memorandum of PWRI 4075;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 39th. Technical Memorandum of PWRI 4075. Proceedings. May 14-16, 2007, Tsukuba, Japan, 310-319 pp, 2007.
  Duthinh, D.; McGrattan, K. B.; Khaskia, A.
• Recent Developments in the Design of New Refrigerant Mixtures for Existing and Future Systems.
  Proceedings of the International Seminar: New Technology in Refrigeration. September 1994, Padua, Italy, 1994.
  Didion, D. A.
• Recent Developments in the Measurement of Transport Properties in Cement-Based Materials.
  Chapter 48;Mechanisms of Chemical Degradation of Cement-Based Systems. Proceedings of the Materials Research Society's Symposium on Mechanisms of Chemical Degradation of Cement-Based Systems. November 27-30, 1995, Boston, MA, E & FN Spon, London, England, Scrivener, K. L.; Young, J. F., Editor(s)(s), 413-423 pp, 1997.
  Shane, J. D.; Hwang, J. H.; Sohn, D.; Mason, T. O.; Jennings, H. M.; Garboczi, E. J.
• Recent FEMA Activities in Earthquake Risk Analysis and Mitigation.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 300-305 pp, 1998.
  Nishenko, S.; Drury, C.; Milheizler, J.
• Recent Progress in Nanoscale Indentation of Polymers Using the AFM.
  SEM IX International Congress on Experimental Mechanics. Proceedings. Society for Experimental Mechanics. June 5-8, 2000, Orlando, FL, 912-915 pp, 2000.
  VanLandingham, M. R.; Villarrubia, J. S.; Meyers, G. F.
• Reciprocity Law Experiments in Polymeric Photodegradation: A Critical Review.
  Progress in Organic Coatings, Vol. 47, No. 3/4, 292-311, September 2003.
  Martin, J. W.; Chin, J. W.; Nguyen, T.
• Recommendations of TC 129-MHT: Test Methods for Mechanical Properties of Concrete at High Temperatures. Part 4. Tensile Strength for Service and Accident Conditions.
  Materials and Structures, Vol. 33, No. 228, 219-223, May 2000.
  Schneider, U.; Schwesinger, P.; Debicki, G.; Diederichs, U.; Felicetti, R.; Franssen, J. M.; Furumura, F.; Jumppanen, U. M.; Khoury, G. A.; Millard, A.; Morris, W. A.; Phan, L. T.
• Recommendations of TC 129-MHT: Test Methods for Mechanical Properties of Concrete at High Temperatures. Part 4. Tensile Strength for Service and Accident Conditions.
  Materials and Structures, Vol. 33, No. 228, 219-223, May 2000.
  Schneider, U.; Schwesinger, P.; Debicki, G.; Diederichs, U.; Felicetti, R.; Franssen, J. M.; Furumura, F.; Jumppanen, U. M.; Khoury, G. A.; Millard, A.; Morris, W. A.; Phan, L. T.
• Recommendations of TC 129-MHT: Test Methods for Mechanical Properties of Concrete at High Temperatures. Part 9. Shrinkage for Service and Accident Conditions.
  Materials and Structures, Vol. 33, No. 228, 224-228, May 2000.
  Schneider, U.; Schwesinger, P.; Debicki, G.; Diederichs, U.; Felicetti, R.; Franssen, J. M.; Furumura, F.; Jumppanen, U. M.; Khoury, G. A.; Millard, A.; Morris, W. A.; Phan, L. T.
• Recommendations of TC 129-MHT: Test Methods for Mechanical Properties of Concrete at High Temperatures. Part 9. Shrinkage for Service and Accident Conditions.
  Materials and Structures, Vol. 33, No. 228, 224-228, May 2000.
  Schneider, U.; Schwesinger, P.; Debicki, G.; Diederichs, U.; Felicetti, R.; Franssen, J. M.; Furumura, F.; Jumppanen, U. M.; Khoury, G. A.; Millard, A.; Morris, W. A.; Phan, L. T.
• Recommendations of the Lifeline Policymakers Workshop.
  NISTIR 6085; 42 p. October 1997.
  Mohraz, B.; Chung, R. M.
• Recommended Performance-Based Criteria for the Design of Manufactured Home Foundation Systems to Resist Wind and Seismic Loads.
  NISTIR 5664; 74 p. August 1995.
  Marshall, R. D.; Yokel, F. Y.
• Reconnaissance Report on Damage to Engineered Structures During the May 1999 Oklahoma City Tornado.
  NISTIR 6899; 54 p. August 2002.
  Riley, M. A.
• Reconstructing Images of Bar Codes for Construction Site Object Recognition.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 363-368 pp, 2002.
  Gilsinn, D. E.; Cheok, G. S.; O'Leary, D. P.
• Reconstruction of the Fires in the WTC Towers: Findings and Issues.
  Project 5;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 8 pp, 2004.
  Gann, R. G.
• Reducing Thermal and Autogenous Shrinkage Contributions to Early-Age Cracking.
  Title No. 105-M48;ACI Materials Journal, Vol. 105, No. 4, 414-420, July/August 2008.
  Bentz, D. P.; Peltz, M. A.
• Reference Structural Models and Baseline Performance Analysis of the World Trade Center Towers. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-2A; 230 p. September 2005.
  Faschan, W. J.; Garlock, R. B.
• REFLEAK: NIST Leak/Recharge Simulation Program for Refrigerant Mixtures. Version 3.1. User's Guide.
  NIST Standard Reference Database 73; 28 p. November 2007.
  Didion, D. A.; Kim, M. S.; Domanski, P. A.
• Refrigeranti Stato Della Sostituzione. (R-22 Replacement Status.)
  ZeroSottoZero, No. 1, 94-104, February 2006.
  Calm, J. M.; Domanski, P. A.
• Refrigerant/Lubricant Mixture Boiling Heat Transfer Research at NIST.
  Future Trends in Mechanical Engineering, Research and Development, 16th National Convention of Mechanical Engineers and All India Seminar. Proceedings. September 29-30, 2000, 24-29 pp, 2000.
  Kedzierski, M. A.
• Refrigerant Migration in a Split-Unit Air Conditioner.
  No. 2868;ASHRAE Transactions, Vol. 91, No. 1A, 193-206, January 1985.
  Mulroy, W. J.; Didion, D. A.
• Relating Fresh Concrete Viscosity Measurements From Different Rheometers.
  Journal of Research of the National Institute of Standards and Technology, Vol. 108, No. 3, 229-234, May/June 2003.
  Ferraris, C. F.; Martys, N. S.
• Relating Gloss Loss to Topographical Features of a PVDF Coating.
  Annual Meeting, 82nd. Federation of Societies for Coatings Technology Meeting Technical Program. Federation of Societies for Coatings Technology (FSCT) Meeting. Proceedings. October 27-29, 2004, Chicago, IL, Federation of Societies for Coatings Technology, Blue Bell, PA, 2004.
  Faucheu, J.; Sung, L. P.; Martin, J. W.; Wood, K. A.
• Relating Laboratory and Outdoor Exposure of Coatings. Part IV: Mode and Mechanism for Hydrolytic Degradation of Acrylic-Malamine Coatings Exposed to Water Vapor in the Absence of UV Light.
  Journal of Coatings Technology, Vol. 75, No. 941, 37-50, June 2003.
  Nguyen, T.; Martin, J. W.; Byrd, E.
• Relation Between Adhesion Loss and Water at the Polymer/Substrate Interface.
  Adhesion Society Meeting. Proceedings. February 1995, Hilton Head Island, SC, 252-254 pp, 1995.
  Nguyen, T.; Byrd, W. E.; Alsheh, D.; Bentz, D. P.
• Relation Between Saffir-Simpson Hurricane Scale Wind Speeds and Peak 3-s Gust Speeds Over Open Terrain.
  Journal of Structural Engineering, Vol. 133, No. 7, 1043-1045, July 2007.
  Simiu, E.; Vickery, P.; Kareem, A.
• Relationship Between Chemical Degradation and Thickness Loss of an Amine-Cured Epoxy Coatings Exposed to Different UV Conditions.
  Journal of Coatings Technology Research, Vol. 1, No. 3, 2004.
  Rezig, A.; Nguyen, T.; Martin, D.; Sung, L. P.; Gu, X.; Jamin, J.; Martin, J. W.
• Relationship Between Indoor Air Quality and Carbon Dioxide.
  Indoor Air Quality and Climate, 7th International Conference. Proceedings. Indoor Air '96. Volume 2. July 21-26, 1996, Nagoya, Japan, 961-966 pp, 1996.
  Persily, A. K.
• Relationship Between the Formation Factor and the Diffusion Coefficient of Porous Materials Saturated With Concentrated Electrolytes: Theoretical and Experimental Considerations.
  Concrete Science and Engienering, Vol. 3, No. 12, 216-224, December 2001.
  Snyder, K. A.
• Reliability and Restoration of Water Supply Systems for Fire Suppression and Drinking Following Earthquakes.
  NIST GCR 97-730; 192 p. November 1997.
  Ballantyne, D. B.; Crouse, C. B.
• Remote Control of Machines for Removal of Damages Being Result of Disasters, Wars, and Terrorist Attacks.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 211-215 pp, 2002.
  Bartnicki, A.; Kuczmarski, F.; Przychodzien, T.; Typiak, A.; Wrona, J.
• Remotely Accessed Photovoltaic Power Project.
  Journal of Engineering Technology, Vol. 23, No. 1, 32-39, Spring 2006.
  Hutzel, W. J.; Healy, W. M.
• Remotely Accessed Photovoltaic Power Project.
  Journal of Engineering Technology, Vol. 23, No. 1, 32-39, Spring 2006.
  Hutzel, W. J.; Healy, W. M.
• Repeatability and Reproducibility of Field Exposure Results.
  Service Life Prediction: Methodology and Metrologies. Proceedings. American Chemical Society Symposium Series 805. 2002, American Chemical Society, Martin, J. W.; Bauer, D. R., Editor(s)(s), 2-22 pp, 2002.
  Martin, J. W.
• Repeatability of Energy Consumption Test Results for Compact Refrigerators.
  NISTIR 6560; 25 p. September 2000.
  Yashar, D. A.
• Replacement of "Coarse" Cement Particles by Inert Fillers in Low w/c Ratio Concretes. Part 2. Experimental Validation. Communication.
  Cement and Concrete Research, Vol. 35, No. 1, 185-188, January 2005.
  Bentz, D. P.
• Reply to the Discussion by C. Shi of the Paper "Estimating the Electrical Conductivity of Cement Paste Pore Solution From OH-, K+, and Na+ Concentrations".
  Cement and Concrete Research, Vol. 35, No. 2, 421-422, February 2005.
  Snyder, K. A.
• Reply to the Discussion by S. Chatterji of the Paper "Effect of Speciation on the Apparent Diffusion Coefficient in Nonreactive Porous Systems."
  Cement and Concrete Research, Vol. 32, No. 12, 1991-1992, December 2002.
  Snyder, K. A.; Marchand, J.
• Report of a Workshop on Requalification of Tubular Steel Joints in Offshore Structures. September 5-6, 1995. Houston, Texas.
  NISTIR 5877; 100 p. June 1996.
  Taylor, A. W.
• Report of the NIST Workshop on Automated Steel Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 247-253 pp, 2002.
  Lytle, A. M.; Saidi, K. S.; Stone, W. C.; Gross, J. L.
• Report of Workshop on Advanced Methods and Models for Appearance of Coatings and Coated Objects. National Institute of Standards and Technology, Gaithersburg, MD. May 20, 1996.
  NISTIR 5952; 27 p. March 1997.
  McKnight, M. E.; Martin, J. W.; Galler, M. A.; Hunt, F. Y.; Lipman, R. R.; Vorburger, T. V.; Thompson, A. E.
• Report on the Construction Industry Collaborations Workshop.
  NIST GCR 97-711; 180 p. March 1997.
  Civil Engineering Research Foundation
• Representation and Integration of As-Build Information to IFC Based Product and Process Models for Automated Assessment of As-Built Conditons.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 543-549 pp, 2002.
  Alkinci, B.; Boukamp, F.
• Reproducibility of Tests on Energy Management and Control Systems Using Building Emulators.
  94-23-1;ASHRAE Transactions, Vol. 100, No. 1, 1455-1464, January 1994.
  Peitsman, H. C.; Wang, S.; Karki, S. H.; Park, C.; Haves, P.
• Required Properties of High-Performance Steels.
  NISTIR 6004; 98 p. May 1997.
  Galambos, T. V.; Hajjar, J. F.; Earls, C. J.; Gross, J. L.
• Research and Development of Heat Pumps Using Nonazeotropic Mixture Refrigerants.
  ASHRAE Technical Data Bulletin 54, Vol. 1, No. 9, 132-138, June 1985.
  Calm, J. M.; Didion, D. A.
• Results From Field Testing of Embedded Air Handling Unit and Variable Air Volume Box Fault Detection Tools.
  NISTIR 7365; 76 p. October 2006.
  Schein, J.
• Results From Laboratory Testing of Embedded Air Handling Unit and Variable Air Volume Box Fault Detection Tools.
  NISTIR 7036; 38 p. August 2003.
  Schein, J.; Bushby, S. T.; House, J. M.
• Retrofit of Pre-Northridge Moment-Resisting Connections.
  Journal of Structural Engineering, Vol. 126, No. 4, 445-452, April 2000.
  Civjan, S. A.; Englehardt, M. D.; Gross, J. L.
• Retrofit of Pre-Northridge Moment-Resisting Connections.
  Journal of Structural Engineering, Vol. 126, No. 4, 445-452, April 2000.
  Civjan, S. A.; Englehardt, M. D.; Gross, J. L.
• Review of Early-Age Properties of Cement-Based Materials.
  Cement and Concrete Research, Vol. 38, No. 2, 196-204, February 2008.
  Bentz, D. P.
• Review of Mechanical Properties of HSC at Elevated Temperature.
  Journal of Materials in Civil Engineering, Vol. 10, No. 1, 58-64, February 1998.
  Phan, L. T.; Carino, N. J.
• Revision of Standard 62: What a Difference a Decade Makes.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 3. June 30-July 5, 2002, Monterey, CA, 328-333 pp, 2002.
  Persily, A. K.
• Revision of Standard 62: What a Difference a Decade Makes.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 3. June 30-July 5, 2002, Monterey, CA, 328-333 pp, 2002.
  Persily, A. K.
• Rheologie du beton frais remanie. III - L'essai au cone d'Abrams modifie. [Rheology of Disturbed Fresh Concrete. Part 3. The Modified Slump Cone Test.]
  Bulletin des Laboratoies des Ponts et Chaussees, Vol. 215, 53-60, May/June 1998.
  deLarrard, F.; Ferraris, C. F.
• Rheology Measurement of Fresh Concrete With a Mixing Truck.
  Design and Use of Self-Consolidating Concrete, 2nd North American Conference (SCC 2005) and Self-Compacting Concrete, 4th International RILEM. Symposium Proceedings. October 30-November 3, 2005, Chicago, IL, 539-544 pp, 2005.
  Amziane, S.; Ferraris, C. F.; Koehler, E. P.
• Rheology of Cementitious Materials.
  Materials Research Society (MRS Bulletin), Vol. 29, No. 5, 314-318, May 2004.
  Flatt, R. J.; Martys, N. S.; Bergstrom, L.
• RILEM Technical Committee TMC, Testing and Modelling Chloride Penetration in Concrete.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.1. November 9-10, 1998, 3-4 pp, 1999.
  Castellote, M.
• Risk Analysis for Extreme Events: Economic Incentives for Reducing Future Losses.
  NIST GCR 04-871; 99 p. October 2004.
  Kunreuther, H.; Meyer, R.; VandenBulte, C.
• Risk Exposure and Risk Attitude of Homeowners in Fire Protection Investment Decisions.
  NISTIR 89-4212; 82 p. December 1989.
  Fuller, S. K.
• Risk Mitigation Plan for Optimizing Protection o fConstructed Facilities.
  Cost Engineering, Vol. 46, No. 8, 26-33, August 2004.
  Marshall, H. E.; Chapman, R. E.; Leng, C. J.
• Robots for Spacing of Wood.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 269-272 pp, 2002.
  Bock, T.; Parshin, D.; Souetina, T.; Boulgakov, A.
• Role of Economic Analysis in the Development of Energy Standards for New Buildings.
  NBSIR 78-1471; July 1978.
  Petersen, S. R.
• Role of R22 in Refrigerating and Air Conditioning Equipment.
  International Institute of Refrigeration. International Colloquium of Brussels, Refrigeration and CFCs. March 19-20, 1990, Paris, France, 1-18 pp, 1990.
  Didion, D. A.; Cohen, R.; Tree, D. R.
• Role of Refrigerant Mixtures.
  Bulletin of International Institute of Refrigeration, No. 94-3, 6-11, January 1994.
  Didion, D. A.
• Role of the CIMsteel Integration Standards in Automating the Erection and Surveying of Constructional Steelwork .
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 15-20 pp, 2002.
  Reed, K. A.
• Roofing Materials and Systems - W83.
  CIB Publication 211; November 1997.CIB Coordinators' Trend Reports: An Anthology of Future Perspectives, 1-6 pp, 1997.
  Rossiter, W. J., Jr.; Kane, E.
• Room-Temperature Thermal Conductivity of Expanded Polystyrene Board for a Standard Reference Material.
  NISTIR 5838; 42 p. May 1996.
  Zarr, R. R.; Davis, M. W.; Anderson, E. H.
• Rubber Particles From Recycled Tires in Cementitious Composite Materials.
  NISTIR 5850 R; 23 p. May 1996.
  Huynh, H.; Raghavan, D.; Ferraris, C. F.
• Rule-Based Fault Detection Method for Air Handling Units.
  Energy and Buildings, Vol. 38, No. 12, 1485-1492, December 2007.
  Schein, J.; Bushby, S. T.; Castro, N. S.; House, J. M.

S

• Safety Evaluation of Low-Rise Steel Structures Under Wind Loads by Nonlinear Database-Assisted Technique.
  Journal of Structural Engineering, Vol. 133, No. 4, 587-594, April 2007.
  Duthinh, D.; Fritz, W. P.
• Sans and Saxs Study on Aqueous Mixtures of Fullerene-Based Star Ionomers and Sodium Dodecyl Sulfate.
  Physica A: A Statistical Mechanics and Its Application, Vol. 304, 191-201, 2002.
  Jeng, U.; Liua, W. J.; Lin, T. L.; Tsao, C. S.; Cantennwala, T.; Chiang, L. Y.; Sung, L. P.; Han, C. C.
• Scanning Electron Microscopy Imaging of Hydraulic Cement Microstructure.
  Cement and Concrete Composites, Vol. 26, No. 8, 957-966, November 2004.
  Stutzman, P. E.
• Scanning Electron Microscopy in Concrete Petrography.
  Calcium Hydroxide in Concrete (Workshop on the Role of Calcium Hydroxide in Concrete). Materials Science of Concrete Special Volume. Proceedings. November 1-3, 2000, Anna Maria Island, Florida, Skalny, J.; Gebauer, J.; Odler, I., Editor(s)(s), 59-72 pp, 2001.
  Stutzman, P. E.
• Search for Alternative Refrigerants: A Molecular Approach.
  IIR (International Institute of Refrigeration) Conference. Proceedings. July 1988, 1988.
  McLinden, M. O.; Didion, D.
• Seasonal Performance Evaluation Procedures for Domestic Electric Driven Heat Pump's and Air Conditioner's.
  Japanese Association of Refirgeration, 1988 Annual Meeting. March 1988, Tokyo, Japan, 1988.
  Didion, D. A.
• Second International Green Building Conference and Exposition-1995.
  NIST SP 888; 160 p. August 1995.U.S. Green Building Council (USGBC) and the National Institute of Standards and Technology. Green Building Conference and Exposition, 2nd International. Proceedings. August 13-15, 1995, Big Sky, MO, Fanney, A. H.; Whitter, K. M.; Cohn, T.B., Editor(s)(s), 1-155 pp, 1995.
  Fanney, A. H., Editor; Whitter, K. M., Editor; Cohn, T. B., Editor
• Secure Integration of Building Networks Into the Global Internet.
  NIST GCR 02-837; 41 p. October 2002.
  Zachary, J.; Brooks, R.; Thompson, D.
• Seeking Validation and Consensus on Slip-Resistance Measurements and Standards. Report From the Workshop on Evolution of Slip-Resistance Standards November 21-22, 1996.
  NISTIR 5988; 33 p. March 1997.
  Frohnsdorff, G. J. C.; Martin, J. W.
• Seismic Analysis of Hoover Dam.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 144-157 pp, 1998.
  Nuss, L. K.
• Seismic Behavior of a Six-Story Precast Office Building.
  Federation Internationale de la Precontrainte (FIP). Proceedings of the 12th Congress. Volume 1. FIP'94. May 29-June 2, 1994, Washington, DC, E16-E22 pp, 1994.
  Tadros, M. K.; Einea, A.; Low, S. G.; Magana, R. A.; Schultz, A. E.
• Seismic Design of Non-Structural Building Components in the United States.
  Wind and Seismic Effects, 29th Joint Meeting of U.S./Japan Panel. Proceedings. U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Technical Memorandum of PWRI No. 3524. May 13-16, 1997, Tsukuba, Japan, 245-259 pp, 1997.
  Taylor, A. W.; Phan, L. T.
• Seismic Information System for Civil Infrastructures.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 306-318 pp, 1998.
  Hideki, S.; Nozaki, T.
• Seismic Performance of Masonry Walls With Bed Joint Reinforcement.
  Structural Engineers World Congress. Proceedings. Paper Number T119-4. July 18-23, 1998, San Francisco, CA, Elsevier Science Ltd., 1-7 pp, 1998.
  Schultz, A. E.; Hutchinson, R. S.; Cheok, G. S.
• Seismic Rehabilitation Design of Steel Moment Connection With Welded Haunch.
  Journal of Structural Engineering, Vol. 126, No. 1, 69-78, January 2000.
  Yu, Q. S.; Uang, C. M.; Gross, J. L.
• Seismic Rehabilitation Design of Steel Moment Connection With Welded Haunch.
  Journal of Structural Engineering, Vol. 126, No. 1, 69-78, January 2000.
  Yu, Q. S.; Uang, C. M.; Gross, J. L.
• Seismic Resistance of Vertical Joints in Precast Shear Walls.
  Federation Internationale de la Precontrainte (FIP). Proceedings of the 12th Congress. Volume 1. FIP'94. May 29-June 2, 1994, Washington, DC, E25-E27 pp, 1994.
  Schultz, A. E.; Tadros, M. K.; Huo, X. M.; Magana, R. A.
• Seismic Response of Precast Concrete Frames With Hybrid Connections.
  ACI Structural Journal, Vol. 95, No. 5, 527-539, September/October 1998.
  Cheok, G. S.; Stone, W. C.; Kunnath, S. K.
• Seismic Risk Analysis of Liquid Fuel Systems: A Conceptual and Procedural Framework for Guidelines Development.
  NIST GCR 97-719; 79 p. June 1997.
  Shinozuka, M.; Eguchi, R.
• Seismic Safety of Federal Buildings - Initial Program: How Much Will It Cost?
  NISTIR 5419; 30 p. April 1994.
  Todd, D. R.
• Selecting Cost-Effective Green Building Products: BEES Approach.
  Journal of Construction Engineering and Management, Vol. 125, No. 6, 448-455, November/December 1999.
  Lippiatt, B. C.
• Selecting Environmentally and Economically Balanced Building Materials.
  NIST SP 888; August 1995.OECD Green Goods IV: International Conference on Greener Public Purchasing. Proceedings. Beil, Switzerland. 77-87 pp, February 1997 AND Public Technology, Inc. and U.S. Green Building Council. Selecting Environmentally and Economically Balanced Building Materials. Reprinted as Chapter 2 of Sustainable Building Technology Manual: Green Building Design, Construction, and Operations. Economics and Environment. Part 1. Chapter 2, Gottfried, D., Editors, 1.13-1.19 pp, June 1996 AND National Institute of Standards and Technology. Green Building Conference and Exposition, 2nd International. Proceedings. 1995, Gaithersburg, MD, Fanney, A. H.; Whitter, K. M.,; Cohn, T. B., Editors, 37-46 pp, 1995, 1997.
  Lippiatt, B. C.; Norris, G. A.
• Selecting Environmentally and Economically Balanced Building Materials.
  NIST SP 888; August 1995.OECD Green Goods IV: International Conference on Greener Public Purchasing. Proceedings. Beil, Switzerland. 77-87 pp, February 1997 AND Public Technology, Inc. and U.S. Green Building Council. Selecting Environmentally and Economically Balanced Building Materials. Reprinted as Chapter 2 of Sustainable Building Technology Manual: Green Building Design, Construction, and Operations. Economics and Environment. Part 1. Chapter 2, Gottfried, D., Editors, 1.13-1.19 pp, June 1996 AND National Institute of Standards and Technology. Green Building Conference and Exposition, 2nd International. Proceedings. 1995, Gaithersburg, MD, Fanney, A. H.; Whitter, K. M.,; Cohn, T. B., Editors, 37-46 pp, 1995, 1997.
  Lippiatt, B. C.; Norris, G. A.
• Self-Assembly by Phase Separation in Polymer Thin Films.
  Encyclopedia of Materials: Science and Technology, Elservier Science Ltd., Buschow, K. H. J.; Cahn, R. W.; Flemings, M. C.; Ilschner, B., Editor(s), 8319-8322 p., 2002.
  Karim, A.; Douglas, J. F.; Sung, L. P.; Ermi, B. D.
• SEM Analysis and Computer Modelling of Hydration of Portland Cement Particles.
  ASTM STP 1215;American Society for Testing and Materials (ASTM). Petrography of Cementitious Materials. Proceedings. ASTM STP 1215. 1995, Am. Soc. for Testing and Matl., Philadelphia, PA, DeHayes, S. M.; Stark, D., Editor(s)(s), 60-73 pp, 1995.
  Bentz, D. P.; Stutzman, P. E.
• Semantic Mapping Between IAI ifcXML and FIATECH AEX Models for Centrifugal Pumps.
  NISTIR 7223; 65 p. May 2005.
  Begley, E. F.; Palmer, M. E.; Reed, K. A.
• Semi-Active Control Algorithms for Structures With Variable Dampers.
  NISTIR 6052; 35 p. October 1997.Journal of Engineering Mechanics, Vol. 124, No. 9, 981-990, September 1998.
  Sadek, F.; Mohraz, B.
• Semi-Active Control Algorithms for Structures With Variable Dampers.
  NISTIR 6052; 35 p. October 1997.Journal of Engineering Mechanics, Vol. 124, No. 9, 981-990, September 1998.
  Sadek, F.; Mohraz, B.
• Semi-Active Control of Seismically Excited Hysteretic Structures Using Varible Viscous Dampers.
  European Conference on Structural Control, 3rd World Conference. (3WCSC). Proceedings. April 7-11, 2002, Como, Italy, 1-6 pp, 2002.
  El-Borgi, S.; Sadek, F.; Jemai, B.; Walha, M. A.; Riley, M. A.
• Semi-Theoretical Simulation Model for a Transcritical Carbon Dioxide Mobile A/C System.
  SAE 2000 World Congress. Proceedings. Society of Automotive Engineers, Inc. (ASE). SAE Technical Paper Series 2000-01-0985. March 6-9, 2000, Detroit, MI, Society of Automotive Engineers, Inc., Warrendale, PA, 1-11 pp, 2000.
  Brown, J. S.; Domanski, P. A.
• SEM/X-Ray Imaging of Cement-Based Materials.
  Microscopy Applied to Building Materials, 7th Euroseminar. Proceedings. June 29-July 2, 1999, Delft, The Netherlands, Delft University of Technology, Delft, The Netherlands, Pietersen, H. S.; Larbi, J. A.; Janssen, H. H. A., Editor(s)(s), 457-466 pp, 1999.
  Bentz, D. P.; Stutzman, P. E.; Haecker, C. J.; Remond, S.
• Sensitivity Analysis.
  Technology Management Handbook. Chapter 8.12, CRC Press LLC, Boca Raton, FL, Dorf, R. C., Editor, 8/59-63 p., 1999 AND Engineering Handbook. Chapter 187, CRC Press, Inc., Boca Raton, FL, Dorf, R. C., Editor, 1962-1967 p., 1996, 1999.
  Marshall, H. E.
• Sensitivity Analysis.
  Technology Management Handbook. Chapter 8.12, CRC Press LLC, Boca Raton, FL, Dorf, R. C., Editor, 8/59-63 p., 1999 AND Engineering Handbook. Chapter 187, CRC Press, Inc., Boca Raton, FL, Dorf, R. C., Editor, 1962-1967 p., 1996, 1999.
  Marshall, H. E.
• Sensitivity Analysis.
  Technology Management Handbook. Chapter 8.12, CRC Press LLC, Boca Raton, FL, Dorf, R. C., Editor, 8/59-63 p., 1999 AND Engineering Handbook. Chapter 187, CRC Press, Inc., Boca Raton, FL, Dorf, R. C., Editor, 1962-1967 p., 1996, 1999.
  Marshall, H. E.
• Sensitivity of Shear Strength of RC and PC Beams to Shear Friction and Concrete Softening According to the MCFT.
  ACI Structural Journal, [pages unknown], 1997.
  Duthinh, D.
• Sensitivity of Shear Strength of Reinforced Concrete and Prestressed Concrete Beams to Shear Friction and Concrete Softening According to Modified Compression Field Theory.
  ACI Structural Journal, Vol. 96, No. 4, 495-508, July/August 1999.
  Duthinh, D.
• Sensors and Techniques for Structural Monitoring.
  American Society of Civil Engineers (ASCI). Structures Congress XII. Volume 2. April 24-28, 1994, Atlanta, GA, American Society of Civil Engineers, New York, NY, Baker, N. C.; Goodno, B. J., Editor(s)(s), 1379-1384 pp, 1994.
  Marshall, R. D.
• Separation, Size Reduction, and Processing of XLPE From Electrical Transmission and Distribution Cable.
  Polymer Engienering and Science, Vol. 40, No. 4, 863-879, April 2000.
  White, C. C.; Wagenblast, J.; Shaw, M. T.
• Service Life Prediction Based on Sorptivity for Highway Concrete Exposed to Sulfate Attack and Freeze-Thaw Conditions.
  FHWA-RD-01-162; 64 p. March 2002.
  Bentz, D. P.; Ehlen, M. A.; Ferraris, C. F.; Winpigler, J. A.
• Shaking Table Test on Base Isolated House Model.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 477-483 pp, 1998.
  Yamanouchi, H.; Midorikawa, M.; Iiba, M.
• Shape Analysis of a Reference Cement.
  Cement and Concrete Research, Vol. 34, No. 10, 1933-1937, October 2004.
  Garboczi, E. J.; Bullard, J. W.
• Shear Design of High-Strength Concrete Beams: A Review of the State-of-the-Art.
  NISTIR 5870; 203 p. August 1996.
  Duthinh, D.; Carino, N. J.
• Shear-Induced Ordering in a Homopolymer Blend With Block-Copolymer Surfactant.
  Physical Review Letters, Vol. 79, No. 23, 4693-4696, December 8, 1997.
  Nakatani, A. I.; Sung, L. P.; Hobbie, E. K.; Han, C. C.
• Shear Strength of High-Strength Concrete Walls and Deep Beams.
  NISTIR 6495; 19 p. May 2000.
  Duthinh, D.
• Shear Strength of PC Beams: Parametric Study of Shear Friction and Concrete Softening.
  High Strength Concrete, First (1st) International Conference. Sponsored by United Engineering Foundation, Inc. American Society of Civil Engineers (ASCE). July 13-18, 1997, Keauhou-Kona, Hawaii, Azizinamini, A.; Darwin, D.; French, C., Editor(s)(s), 280-293 pp, 1997.
  Duthinh, D.
• Short-Term Characterization of Building Integrated Photovoltaic Panels.
  Journal of Solar Energy Engineering, Vol. 125, No. 1, 13-20, February 2003.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Shrinkage-Reducing Admixtures and Early Age Desiccation in Cement Pastes and Mortars.
  Cement and Concrete Research, Vol. 31, No. 7, 1075-1085, July 2001.
  Bentz, D. P.; Geiker, M. R.; Hansen, K. K.
• Simple Method of Composition Shifting With a Distillation Column for a Heat Pump Employing a Zeotropic Refrigerant Mixture.
  NISTIR 5689; 27 p. July 1995.
  Rothfleisch, P. I.
• Simple Prediction Method for Condensation Heat Transfer Inside a Micro-Fin Tube.
  NISTIR 6417; 38 p. November 1999.
  Donati, F. M.; Kedzierski, M. A.
• Simplified Design Procedure for Hybrid Precast Concrete Connections.
  NISTIR 5765; 92 p. February 1996.
  Cheok, G. S.; Stone, W. C.; Nakaki, S. D.
• Simplified Design Provisions for Hybrid Precast Connections.
  Wind and Seismic Effects, 29th Joint Meeting of U.S./Japan Panel. Proceedings. U.S./Japan Natural Resources Development Program (UJNR). Technical Memorandum of PWRI No. 3524. May 13-16, 1997, Tsukuba, Japan, Okahaca, M., Editor(s), 149-157 pp, 1997.
  Cheok, G. S.; Lew, H. S.
• Simplified Model for Soot Formation and Oxidation in CFD Simulation of Non-Premixed Hydrocarbon Flames.
  Fire Safety Journal, Vol. 40, No. 2, 141-176, March 2005.
  Lautenberger, C. W.; deRis, J. L.; Dembsey, N. A.; Barnett, J. R.; Baum, H. R.
• Simulating the Coupled Fire, Thermal, Structural Response of World Trade Center Towers.
  Project 5;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 21 pp, 2004.
  Prasad, K. R.; Baum, H. R.
• Simulating the Performance of Building Area Networks as a Communication Bridge to Emergency Responders.
  OPNETWORK. OPNET 2007. Proceedings. August 27-31, 2007, Washington, DC, 1-6 pp, 2007.
  Treado, S. J.; Holmberg, D. G.; Cook, S.
• Simulation-Facilitated Factor-Based Approach for Cost Correlation Evaluation.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 97-102 pp, 2002.
  Wang, W. C.
• Simulation Model and Study of Hydrocarbon Refrigerants for Residential Heat Pump Systems.
  Proceedings of a Conference on New Applications of Natural Working Fluids in Refrigeration and Air Conditioning. May 10-13, 1994, Hanover, Germany, 1994.
  Domanski, P. A.; Didion, D. A.; Mulroy, W. J.; Parise, J.
• Simulation of a Heat Pump Operating With a Nonazeotropic Mixture.
  HI-85-27 No. 3;ASHRAE Technical Data Bulletin 54 AND ASHRAE Transactions, Vol. 91, No. 2B, June 1985.
  Domanski, P. A.; Didion, D. A.
• Simulation of Expansion in Cement Based Materials Subjected to External Sulfate Attack .
  Concrete Science and Engienering: A Tribute toArnon Bentur. Proceedings. International RILEM Symposium. March 22-24, 2004, Evanston, IL, 1-12 pp, 2004.
  Mobasher, B.; Ferraris, C. F.
• Simulation of Fluid Flow and Permeability in Cohesionless Soils.
  Water Resources Research, Vol. 36, No. 4, 851-864, April 2000.
  Martys, N. S.; Masad, E.; Muhunthan, B.
• Simulation of Heat Exchangers of a Window Air Conditioner Retrofitted With R-407C.
  IRC0048;International Congress of Refrigeration, 21st IIR. Proceedings. August 17-22, 2003, Washington, DC, 1-8 pp, 2003.
  Devotta, S.; Padalkar, A. S.; Sane, N. K.; Domanski, P. A.; Sawant, N. N.
• Simulation of Isothermal and Adiabatic Leak Processes of Zeotropic Refrigerant Mixtures.
  HVAC&R Research, Vol. 1, No. 1, 3-20, January 1995.
  Kim, M. S.; Didion, D. A.
• Simulation of Leak/Recharge Process of Refrigerant Mixtures.
  HVAC&R Research, Vol. 1, No. 3, 242-254, July 1995.
  Kim, M. S.; Didion, D. A.
• Simulation of Leak/Recharge Process of Refrigerant Mixtures.
  HVAC&R Research, Vol. 1, No. 3, 242-254, July 1995.
  Kim, M. S.; Didion, D. A.
• Simulation of Multicomponent Fluids in Complex Three-Dimensional Geometries by the Lattice Boltzmann Method.
  Physical Review E, Vol. 53, No. 1, 743-750, January 1996.
  Martys, N. S.; Chen, H.
• Simulation of SCC Flow.
  Design and Use of Self-Consolidation Concrete. North American Conference, 1st. November 12-13, 2002, 27-30 pp, 2003.
  Martys, N. S.; Ferraris, C. F.
• Simulation of Sheared Suspensions With a Parallel Implementation of QDPD.
  Journal of Research of the National Institute of Standards and Technology, Vol. 109, No. 2, 267-277, March/April 2004.
  Sims, J. S.; Martys, N. S.
• Simulation of the Fires in WTC 1 and 2.
  Project 5;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 15 pp, 2004.
  McGrattan, K. B.
• Simulations of Indoor Air Quality and Ventilation Impacts of Demand Controlled Ventilation in Commercial and Institutional Buildings.
  NISTIR 7042; 50 p. August 2003.
  Persily, A. K.; Musser, A.; Emmerich, S. J.; Taylor, A. W.
• Simulations of Indoor Air Quality and Ventilation Impacts of Demand Controlled Ventilation in Commercial and Institutional Buildings.
  Ventilation, Humidity Control and Energy Proceedings. Air Infiltration and Ventilation Centre (AIVC) Conference and Building Environment and Thermal Envelope Council (BETEC) Conference, 24th. Proceedings. (International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems Program. Annex V: Air Infiltration and Ventilation Centre.) October 14, 2003, Washington, DC, 229-234 pp, 2003.
  Persily, A. K.; Musser, A.; Emmerich, S. J.; Taylor, M.
• Simulation Study of a Hierarchical, Rule-Based Method for System-Level Fault Detection and Diagnostics in HVAC Systems.
  NISTIR 7216; 20 p. April 2005.
  Schein, J.; Bushby, S. T.
• Simultaneous Visual and Calorimetric Measurements of R11, R123, and R123/Alkylbenzene Nucleate Flow Boiling.
  NISTIR 4948; 54 p. October 1992.American Society of Mechanical Engineers (ASME). Heat Transfer With Alternate Refrigerants. HTD-Vol. 243. 1993, 27-33 pp, 1992.
  Kedzierski, M. A.
• Single and Multiple Tuned Liquid Column Dampers for Seismic Applications.
  NISTIR 5920; 45 p. November 1996.Earthquake Engineering and Structural Dynamics, Vol. 27, No. 5, 439-463, 1998.
  Sadek, F.; Mohraz, B.; Lew, H. S.
• Single and Multiple Tuned Liquid Column Dampers for Seismic Applications.
  NISTIR 5920; 45 p. November 1996.Earthquake Engineering and Structural Dynamics, Vol. 27, No. 5, 439-463, 1998.
  Sadek, F.; Mohraz, B.; Lew, H. S.
• Single-Phase Heat Transfer and Pressure Drop Characteristics of an Integral-Spine Fin Within an Annulus.
  NISTIR 5454; 33 p. June 1994.Journal of Enhanced Heat Transfer, Vol. 3, No. 3, 201-210, 1996.
  Kedzierski, M. A.; Kim, M. S.
• Single-Phase Heat Transfer and Pressure Drop Characteristics of an Integral-Spine Fin Within an Annulus.
  NISTIR 5454; 33 p. June 1994.Journal of Enhanced Heat Transfer, Vol. 3, No. 3, 201-210, 1996.
  Kedzierski, M. A.; Kim, M. S.
• Situation-Aware Interface Design: An Interaction Constraints Model for Finding the Right Interaction for Mobile and Wearable Computer Systems.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 563-568 pp, 2002.
  Burgy, C. S.; Garrett, J. H., Jr.
• Slab Effects in SMRF Retrofit Connection Tests.
  Journal of Structural Engineering, Vol. 127, No. 3, 230-237, March 2001.
  Civjan, S. A.; Englehardt, M. D.; Gross, J. L.
• Slug Calorimeter for Evaluating the Thermal Performance of Fire Resistive Materials.
  Fire and Materials, Vol. 30, No. 4, 257-270, July/August 2006.
  Bentz, D. P.; Flynn, D. R.; Kim, J. H.; Zarr, R. R.
• Smart and Designer Structural Material Systems.
  Progress in Structural Engineering and Materials, Vol. 4, No. 4, 417-430, October 2002.
  Chong, K. P.; Garboczi, E. J.
• Smart Talk.
  Fire Chief, Vol. 50, No. 8, 54-58, August 2006.
  Holmberg, D. G.
• Smoke Control and Occupant Evacuation at the World Trade Center.
  SL-08-015;Annual Meeting. American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Proceedings. June 21-25, 2008, Salt Lake City, UT, 1-8 pp, 2008.
  Ferreira, M. J.; Strege, S. M.; Peacock, R. D.; Averill, J. D.
• Smoke Management Systems. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-4D; 248 p. September 2005.
  Ferreira, M. J.; Strege, S. M.
• Software Agents for Knowledge Sharing.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 66-68 pp, 1999.
  Finin, T.
• Solar Heating and Cooling in Buildings: Methods of Economic Evaluation. Final Report.
  NBSIR 75-712; July 1975.
  Ruegg, R. T.
• Solid Micromechanics: Research and Challenges.
  Micromechanics Europe (MME 2002) Workshop, 13th. Proceedings. October 6-8, 2002, Sinaia, Romania, 347-358 pp, 2003.Journal of Micromechanics and Microengineering, 2003.
  Chong, K. P.; Sung, L. P.; Ho, D. L.; VanLandingham, M. R.
• Sorption and Diffusion of Alkaline Solution in Organic Coatings at Ambient and Elevated Temperatures.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, American Chemical Society, Washington, DC, 319-320 pp, 2000.
  Nguyen, T.; Chin, J. W.; Aouadi, D. K.; Raghavan, D.
• Sorption and Diffusion of Water, Salt Water, and Concrete Pore Solution in Composite Matrices.
  Journal of Applied Polymer Science, Vol. 1, 483-492, 1999.
  Chin, J. W.; Nguyen, T.; Aouadi, K.
• Sorption of Water in Mortars and Concrete.
  Materials for the New Millennium. Proceedings. Materials Engineering Conference, 4th. Volume 2. American Society of Civil Engineers (ASCE). November 10-14, 1996, Washington, DC, American Society of Civil Engineers, New York, NY, Chong, K. P., Editor(s), 1129-1138 pp, 1996.
  Martys, N. S.; Ferraris, C. F.
• Sorptivity-Based Service Life Predictions for Concrete Pavements.
  Concrete Pavements, 7th International Conference. Proceedings. Volume 1. International Society for Concrete Pavements. September 9-13, 2001, Orlando, FL, 181-193 pp, 2001.
  Bentz, D. P.; Ehlen, M. A.; Ferraris, C. F.; Garboczi, E. J.
• Source of Phenol Emissions Affecting the Indoor Air of an Office Building.
  NISTIR 5353; 49 p. February 1994.
  Martin, J. W.; Guenther, F. R.; Nguyen, T.; Liggett, W. S., Jr.; Byrd, W. E.; Oakley, L.
• Spalling and Mechanical Properties of High Strength Concrete at High Tempeature.
  Volume 2;Concrete Under Severe Conditions: Environment and Loading (CONSECA '07). Volume 2. 5th (Fifth) International Conference. Proceedings. June 4-6, 2007, Tours, France, Toutlemonde, F.; Sakai, K.; Gjorv, O. E.; Banthia, N., Editor(s)(s), 1595-1608 pp, 2007.
  Phan, L. T.
• Spalling Phenomena of HPC and OC.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B3. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 69-73 pp, 1997.
  Anderberg, Y.
• Specimen Preparation for Scanning Electron Microscopy.
  Cement Microscopy, 21st International Conference. Proceedings. April 25-29, 1999, Las Vegas, NV, Jany, L.; Nisperos, A., Editor(s)(s), 10-22 pp, 1999.
  Stutzman, P. E.; Clifton, J. R.
• Spot Test Kits for Detecting Lead in Household Paint: A Laboratory Evaluation.
  NISTIR 6398; 94 p. May 2000.
  Rossiter, W. J., Jr.; Vangel, M. G.; McKnight, M. E.; Dewalt, G.
• Stability of Voids Formed in Cavities at Liquid-Solid Interfaces.
  Journal of Colloid and Interface Science, Vol. 276, No. 1, 188-196, 2004.
  Bullard, J. W.
• Standard Fire Tests of WTC Tower Typical Floor Construction.
  Project 6;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 31 pp, 2004.
  Gross, J. L.
• Standardization of Data Flows on Earthworks and Road Pavement Sites Using Information Systems.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 305-310 pp, 2002.
  Peyret, F.
• Standard Product Models for Supporting Automated Erection of Structural Steelwork.
  International Symposium on Automation and Robotics in Construction (ISARC 2006). Proceedings. October 3-5, 2006, Tokyo, Japan, 1-6 pp, 2006.
  Kamat, V. R.; Lipman, R. R.
• Standard Reference Materials: Glass Fiberboard, SRM 1450c, for Thermal Resistance From 280 K to 340 K.
  NIST SP 260-130; 64 p. April 1997.
  Zarr, R. R.
• Standards Development for Gas Phase Air Cleaning Equipment in Buildings.
  NISTIR 7525; 29 p. October 2008.
  Persily, A. K.; Howard-Reed, C.; Watson, S.; Martys, N. S.; Garboczi, E. J.; Davis, H.
• Standards for Evaluating the Susceptibility of Cement-Based Materials to External Sulfate Attack.
  Materials Science of Concrete: Sulfate Attack Mechanisms, Special Volume. Proceedings. October 5-6, 1998, Quebec, Canada, American Ceramic Society, Westerville, OH, 337-355 pp, 1999.
  Clifton, J. R.; Frohnsdorff, G. J. C.; Ferraris, C. F.
• Standards for the Testing and Evaluation of Seismic Isolation Systems.
  ASME/JSME Pressure Vessels and Piping Conference. Proceedings. Volume 319. July 23-27, 1995, Honolulu, HI, 39-43 pp, 1995.
  Taylor, A. W.; Shenton, H. W., III; Chung, R. M.
• Standards Media and Methods.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 1. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Inst., Haifa, Israel, 1/113-125 pp, 1999.Automation in Construction, Vol. 8, 473-479, 1999.
  Wright, R. N.
• Standards Media and Methods.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 1. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Inst., Haifa, Israel, 1/113-125 pp, 1999.Automation in Construction, Vol. 8, 473-479, 1999.
  Wright, R. N.
• Standards of Seismic Safety for Existing Federally Owned and Leased Buildings and Commentary.
  NISTIR 5382; 87 p. February 1994.
  Todd, D. R.
• Standards of Seismic Safety for Existing Federally Owned and Leased Buildings.
  NISTIR 6762; 27 p. January 2002.
  Cauffman, S. A.; Lew, H. S.
• Standards of Seismic Safety for Existing Federally Owned and Leased Buildings.
  NISTIR 6762; 27 p. January 2002.
  Cauffman, S. A.; Lew, H. S.
• Standards to Resist Hurricane Wind Forces.
  NIST SP 871; September 1994.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 26th. May 17-20, 1994, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 31-38 pp, 1994.
  Fuller, G. R.; Marshall, R. D.
• Standard Test Procedures for Seismic Isolation Systems.
  NIST SP 871; September 1994.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 26th. May 17-20, 1994, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 97-107 pp, 1994.
  Shenton, H. W., III
• State-of-the-Art Report on Seismic Design Requirements for Nonstructural Building Components.
  NISTIR 5857; 73 p. June 1996.
  Phan, L. T.; Taylor, A. W.
• State-of-the-Art Review for Commissioning Low Energy Buildings: Existing Cost/Benefit and Persistence Methodologies and Data, State of Development of Automated Tools and Assessment of Needs for Commissioning ZEB.
  NISTIR 7356; 105 p. August 2007.
  Frank, M.; Friedman, H.; Heinemeier, K.; Toole, C.; Claridge, D.; Castro, N. S.; Haves, P.
• State-of-the-Art Review of CO2 Demand Controlled Ventilation Technology and Application.
  NISTIR 6729; 47 p. March 2001.
  Emmerich, S. J.; Persily, A. K.
• State Solar Energy Legislation of 1976: A Review of Statutes Relating to Buildings. Final Report.
  NBSIR 77-1297; September 1977.
  Eisenhard, R. M.
• Station Nightclub Fire Investigation Status Report.
  National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 13 pp, 2004.
  Grosshandler, W. L.
• Status of NIST Thermal Insulation Reference Materials.
  International Thermal Conductivity 29th Conference/International Thermal Expansion 17th Symposium. Proceedings. Chapter 2: Building Insulation Materials. June 24-27, 2007, Birmingham, AL, DEStech Publications, Inc., Koenig, J. R.; Ban, H., Editor(s)(s), 1-9 pp, 2007.
  Zarr, R. R.
• Status of the Revision of ASHRAE Standard 62.
  Health Buildings 2000, 6th International Conference. Proceedings. Volume 2. Design and Operation of HVAC Systems. August 6-10, 2000, Espoo, Finland, 321-325 pp, 2000.
  Persily, A. K.
• Status of the U.S. Precast Seismic Structural Systems (PRESSS) Program.
  NIST SP 871; September 1994.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 26th. May 17-20, 1994, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 365-368 pp, 1994.
  Priestley, M. J. N.; Lew, H. S.
• Steady-State Modeling of Absorption Heat Pumps With a Comparison to Experiments.
  HI-85-36 No. 1;ASHRAE Transactions, Vol. 91, No. 2, 1793-1807, June 1985.
  McLinden, M. O.; Klein, S. A.
• Steel Inventory and Identification. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-3B; 112 p. September 2005.
  Banovic, S. W.
• Stereological and Statistical Properties of Entrained Voids in Concrete: A Mathematical Basis for Air Void System Characterization.
  Materials Science of Concrete VI. Proceedings. American Ceramic Society. December 2001, Mindess, S.; Skalny, J., Editor(s)(s), 129-214 pp, 2001.
  Snyder, K. A.; Natesaiyer, K.; Hover, K.
• Stochastic Resonance; A Chaotic Dynamics Approach.
  Physical Review E, Vol. 54, No. 2, 1298-1304, August 1996.
  Franaszek, M.; Simiu, E.
• Stoichiometry and Kinetics of Slag Hydration in the Presence of Calcium Hydroxide.
  Journal of the American Ceramic Society, Vol. 85, No. 4, 947-953, 2002.
  Richardson, J. M.; Biernacki, J. J.; Stutzman, P. E.; Bentz, D. P.
• Strategies for Realizing the Benefits of 3D Integrated Modeling of Buildings for the AEC Industry.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 9-14 pp, 2002.
  Eastman, C.; Sacks, R.; Lee, G.
• Strength and Ductility of Concrete Beams Reinforced With Carbon FRP and Steel.
  NISTIR 6830; 33 p. November 2001.
  Duthinh, D.; Starnes, M. A.
• Strengthening Methodology for Lightly Reinforced Concrete Frames-II. Recommended Calculation Techniques for the Design of Infill Walls.
  NISTIR 5421; 44 p. May 1994.
  Phan, L. T.; Todd, D. R.; Lew, H. S.
• Strengthening Methodology for Lightly Reinforced Concrete Frames-I.
  NISTIR 5128; 108 p. February 1993.
  Phan, L. T.; Todd, D. R.; Lew, H. S.
• Strengthening Methodology for Lightly Reinforced Concrete Frames.
  Earthquake Engineering, 11th World Conference. Proceedings. Paper No. 1896. June 23-28, 1996, Acapulco, Mexico, Elsevier Science Ltd., 1-8 pp, 1996.
  Phan, L. T.; Lew, H. S.
• Strengthening Methodology for Lightly Reinforced Concrete Frames: Recommended Design Guidelines for Strengthening With Infill Walls.
  NISTIR 5682; 63 p. July 1995.
  Phan, L. T.; Cheok, G. S.; Todd, D. R.
• Strengthening of Reinforced Concrete Beams with Carbon FRP.
  Composites in Constructions. 2001, Swets and Zeitlinger, Lisse, 2001.
  Duthinh, D.; Starnes, M. A.
• Strength Evaluation of Connectors for Intermodal Containers.
  NISTIR 6557; 41 p. August 2000.
  Lew, H. S.; Sadek, F.; Anderson, E. D.
• Strength of an Interlocking FRP Connection.
  NISTIR 6829; 33 p. November 2001.
  Duthinh, D.; Bajpai, K.
• Strength of Partially-Grouted Masonry Shear Walls Under Lateral Loads.
  NISTIR 5147; 67 p. June 1993.
  Fattal, S. G.
• Stress, Displacement, and Expansive Cracking Around a Single Spherical Aggregate Under Different Expansive Conditions.
  Cement and Concrete Research, Vol. 27, No. 4, 495-500, 1997.
  Garboczi, E. J.
• Stress Due to Alkali-Silica Reaction in Mortars.
  Chapter 9;Mechanisms of Chemical Degradation of Cement-Based Systems. Proceedings of the Materials Research Society's Symposium on Mechanisms of Chemical Degradation of Cement-Based Systems. November 27-30, 1995, Boston, MA, E & FN Spon, London, England, Scrivener, K. L.; Young, J. F., Editor(s)(s), 75-82 pp, 1997.
  Ferraris, C. F.; Clifton, J. R.; Garboczi, E. J.; Davis, F. L.
• Stress Due to Alkali-Silica Reaction in Mortars.
  Materials for the New Millennium. Proceedings. Materials Engineering Conference, 4th. Volume 2. American Society of Civil Engineers (ASCE). November 10-14, 1996, Washington, DC, American Society of Civil Engineers, New York, NY, Chong, K. P., Editor(s), 1379-1387 pp, 1996.
  Ferraris, C. F.; Garboczi, E. J.; Davis, F. L.; Clifton, J. R.
• Strong Motion From Surface Waves in Deep Sedimentary Basins. First Report.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 69-83 pp, 1998.
  Joyner, W. B.
• Structural Control for Wind and Earthquake Loads: NSF'S Corrdinated Research Program.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 424-432 pp, 1998.
  Singh, M. P.; Soong, T. T.
• Structural Fire Response and Collapse Analysis.
  Project 6;National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 59 pp, 2004.
  Gross, J. L.; McAllister, T. P.
• Structural Fire Response and Probable Collapse Sequence of the World Trade Center Towers. Chapter 7-Appendix B. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-6; 204 p. September 2005.
  Gross, J. L.; McAllister, T. P.
• Structural Fire Response and Probable Collapse Sequence of the World Trade Center Towers. Chapters 1-6. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-6; 266 p. September 2005.
  Gross, J. L.; McAllister, T. P.
• Structural Performance of Woodframe Housing: State-of-the-Art and Research Needs.
  CUREe Publication W-01;Seismic Testing, Analysis and Design of Woodframe Construction. Invitational Workshop. Proceedings. March 1999, Richmond, CA, 121-123 pp, 1999.
  Sadek, F.; Gross, J. L.
• Structural Study of Langmuir Monolayers Containing Lipidated Poly(ethylene glycol) and Peptides.
  Langmuir, Vol. 17, No. 22, 6931-6937, 2001.
  Bianco-Peled, H.; Dori, Y.; Schneider, J.; Sung, L. P.; Satija, S.; Tirrell, M.
• Studies of Hydration and Drying in Cement Pastes by Scanning X-Ray Absorptiometry.
  Water in Cement Paste and Concrete Hydration and Pore Struture Workshop. Proceedings. Nordic Concrete Federation. October 7-8, 1999, Skagen, Denmark, 107-114 pp, 1999.
  Bentz, D. P.; Hansen, K. K.
• Studies on the Fire Resistance of High-Strength Concrete at the National Research Council of Canada.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B4. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 75-86 pp, 1997.
  Kodur, V. K. R.
• Study of a Dissipative Particle Dynamics Based Approach for Modeling Suspensions.
  Journal of Rheology, Vol. 49, No. 2, 401-424, March/April 2005.
  Martys, N. S.
• Study of a Water-to-Water Heat Pump Using Flammable Refrigerants.
  Natural Working Fluids '98 IIR-Gustav Lorentzen Conference. IIF-IIR Sections B and E. Proceedings. June 2-5, 1998, Oslo, Norway, 1998.
  Payne, W. V.; Domanski, P. A.; Muller, J.
• Study of a Water-to-Water Heat Pump Using Hydrocarbon and Hydrofluorocarbon Zeotropic Mixtures.
  NISTIR 6330; 39 p. May 1999.
  Payne, W. V.; Domanski, P. A.; Muller, J.
• Study of In-Tube Evaporation Heat Transfer of Carbon Dioxide.
  ICR0038;Refrigeration International Congress, 21st IIR. (IRC2003). Technical Session B1-8: A New Old Refrigerant: Carbon Dioxide - Heat Transfer. Proceedings. August 17-22, 2003, Washington, DC, 2004.
  Sawant, N. N.; Kim, M. S.; Payne, W. V.; Domanski, P. A.; Hwang, Y. W.
• Study of Optimal Extreme Wind Estimation Procedures.
  Indian Society for Wind Engineering. Sponsored by University of Roorkee, New Delhi. International Association for Wind Engineering. State of the Art in Wind Engineering. Volume 1. Proceedings. International Conference on Wind Engineering, 9th. Davenport Sixtieth Birth Anniversary Volume. January 9-13, 1995, New Delhi, India, Wiley Eastern Limited, New Delhi, India, 69-80 pp, 1995.
  Gross, J. L.; Heckert, N. A.; Lechner, J. A.; Simiu, E.
• Study of the Life Cycle Requirements for an Information Model of the Components That Are Incorporated in Process Facilities.
  NIST GCR 96-705; 122 p. March 1996.
  Arnold, J. A.; Teicholz, P.
• Study of the Performance of Petroleum Storage Tanks During Earthquakes, 1933-1995.
  NIST GCR 97-720; June 1997.
  Cooper, T. W.
• Study of Ventilation and Carbon Dioxide in an Office Building.
  ASHRAE Transactions, Vol. 100, No. 2, 1994.
  Nabinger, S. J.; Persily, A. K.; Dols, W. S.
• Study of Ventilation Measurement in an Office Building.
  NISTIR 4905; 42 p. October 1992.American Society for Testing and Materials. Airflow Performance of Building Envelopes, Components, and Systems. ASTM STP 1255. 1995, Philadelphia, PA, ASTM, West Conshocken, PA, Modera, M. P.; Persily, A. K., Editor(s)(s), 23-46 pp, 1992.
  Dols, W. S.; Persily, A. K.
• Study on Stress in Concrete Gravity Dam Using Seismic Data During Kobe Earthquake.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 130-143 pp, 1998.
  Sasaki, T.; Uesaka, T.; Nagayama, I.
• Study to Determine the Existence of An Azeotropic R-22 "Drop-In" Substitute.
  NISTIR 5784; 48 p. March 1996.
  Kim, M. S.; Morrison, G.; Mulroy, W. J.; Didion, D. A.
• Suite of Homes Representing The U.S. Housing Stock.
  Ventilation, Humidity Control and Energy Proceedings. Air Infiltration and Ventilation Centre (AIVC) Conference and Building Environment and Thermal Envelope Council (BETEC) Conference, 24th. Proceedings. (International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems Program. Annex V: Air Infiltration and Ventilation Centre.) October 14, 2003, Washington, DC, 15-20 pp, 2003.
  Persily, A. K.; Leber, D.
• Sulfate Attack of Cementitious Materials: Volumetric Relations and Expansions.
  NISTIR 5390; 22 p. April 1994.
  Clifton, J. R.; Pommersheim, J. M.
• Summary of Cyclic Lateral Load Tests on Rectangular Reinforced Concrete Columns.
  NISTIR 5984; 101 p. January 1997.
  Taylor, A. W.; Kuo, C.; Wellenius, K.; Chung, D. M.
• Summary of NIST/GSA Workshop on Application of Seismic Rehabilitation Technologies to Mitigate Blast-Induced Progressive Collapse September 10, 2001 Oakland, CA to Mitigate Blast-Induced Progressive Collapse, September 10, 2001, Oakland, California, December 01, 2001.
  NISTIR 6831; 22 p. December 2001.
  Carino, N. J.; Lew, H. S.
• Summary of NIST's Activities Related to the January 17, 1994 Northridge California Earthquake.
  Northridge Earthquake Research Conference. Proceedings. August 20-22, 1997, Los Angeles, CA, 1997.
  Chung, R. M.; Mohraz, B.; Gross, J. L.
• Summary of the Structural Performance of Single-Family, Wood-Frame Housing.
  NISTIR 6224; 168 p. September 1998.
  Yancey, C. W. C.; Cheok, G. S.; Sadek, F.; Mohraz, B.
• Supporting Document for Rehabilitation Cost Estimates of FEMA Buildings.
  NISTIR 6315; 120 p. March 1999.
  Lew, H. S.
• Suppression of Capillary Instability of a Polymeric Thread Via Parallel Plate Confinement.
  Journal of Macromolecules, Vol. 35, No. 15, 5825-5833, 2003.
  Son, Y.; Martys, N. S.; Hagedorn, J. G.; Migler, K. B.
• Suppression of Nucleate Boiling of Pure and Mixed Refrigerants in Turbulent Annular Flow.
  International Journal of Multiphase Flow, Vol. 13, No. 6, 759-772, November/December 1987.
  Ross, H. D.; Radermacher, R.
• Suppression of Phase Separation Pattern Formation in Blend Films With Block Copolymer Compatibilizer.
  Journal of Polymer Science: Part B: Polymer Physics, Vol. 41, No. 14, 1697-1700, July 15, 2003.
  Sung, L. P.; Douglas, J. F.; Han, C. C.; Karim, A.
• Surface and Interface Properties of PVDF/Acrylic Copolymer Blends Before and After UV Exposure.
  Global Connectivity. FSCT 80th Annual Meeting Technical Program. Proceedings. October 30-November 1, 2002, New Orleans, LA, Federation of Socieites for Coatings Technology, Blue Bell, PA, 2002.
  Gu, X.; Sung, L. P.; Ho, D. L.; Michaels, C. A.; Nguyen, T.; Nguyen, D.; Jean, Y. C.
• Surface Wave Method: A Tool for Lifeline Earthquake Engienering.
  Earthquake Engineering Site Characterization. Research Needs Workshop Proceedings. Miscellaneous Paper GK-97-21. Appendix G. U.S. Army Corps of Engineers. Final Report. September 1997, U.S. Army Corps of Engineers, Vicksburg, MS, Koester, J. P.; Holmes, T. L., Editor(s)(s), G1-G14 pp, 1997.
  Andrus, R. D.
• Surface Wetting Effects on the Spreading of Liquid Droplets Impacting a Solid Surface at Low Weber Numbers. Technical Note.
  International Journal of Heat and Mass Transfer, Vol. 44, 235-240, 2001.
  Healy, W. M.; Hartley, J. G.; Abdel-Khalik, S. I.
• Surveying Through Solid Walls.
  Automation and Robotics in Construction, 14th International Symposium. Proceedings. June 8-11, 1997, Pittsburgh, PA, 22-40 pp, 1997.
  Stone, W. C.
• Survey of Concrete Transport Properties and Their Measurement.
  NISTIR 5592; 46 p. February 1995.
  Martys, N. S.
• Survey of Concrete Transport Properties and Their Measurement.
  NISTIR 5592; 46 p. February 1995.
  Martys, N. S.
• Survey of Construction Metrology Options for AEC Industry.
  Journal of Aerospace Engineering, Vol. 12, No. 2, 58-64, April 1999.
  Lindfors, C.; Chang, P.; Stone, W. C.
• Survey of Recent Cementitious Materials Research in Western Europe.
  NISTIR 5480; 32 p. August 1994.
  Bentz, D. P.
• Survey of Steel Moment-Resisting Frame Buildings Affected by the 1994 Northridge Earthquake.
  NISTIR 5625; 174 p. April 1995.
  Youssef, N. F. G.; Bonowitz, D.; Gross, J. L.
• Suspended Hydration and Loss of Freezable Water in Cement Pastes Exposed to 90% Relative Humidity.
  Cement and Concrete Research, Vol. 34, No. 11, 2045-2056, November 2004.
  Snyder, K. A.
• Sustained Load Effects on the Seismic Performance of Concrete Columns.
  Earthquake Engineering Research Institute. Earthquake Awareness and Mitigation Across the Nation. U.S. National Conference, Fifth (5th). Proceedings. Volume 2. July 10-14, 1994, Chicago, IL, 589-597 pp, 1994.
  Schultz, A. E.; Welton, S. S.; Rey, L. E.
• System for Calibration of the Marshall Compaction Hammer.
  NISTIR 5338; FHWA-RD-94-002; 149 p. January 1994.
  Shenton, H. W., III; Cassidy, M. M.; Spellerberg, P. A.; Savage, D. A.
• Systems Approach to the Service Life Prediction Problem for Coating Systems.
  Corrosion 97 Research Topical Symposia. Part 1. Advanced Monitoring and Analytical Techniques. Part 2. Corrosion-Resistant Coatings. 1997, 235-258 pp, 1997.
  Martin, J. W.

T

• Taming Chaotic Dynamics With Weak Periodic Perturbations: An Elucidation and Critique.
  Nanotechnology, Vol. 13, No. 2, 153-156, April 2002.
  Abbadi, Z.; Simiu, E.
• Task Committee A-K Reports and New T/C on Seismic Information Systems. Appendix.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 531-560 pp, 1998.
  
• Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Building Investments.
  NIST SP 757; 97 p. September 1988.
  Marshall, H. E.
• Temperature Effects on Fatigue of Polymer Composites.
  Composites Engineering, 7th Annual International Conference. ICCE/7. Proceedings. Sponsored and Organized for Composites Engineering and College of Engineering, University of New Orleans. July 2-8, 2000, Denver, CO, Hui, D., Editor(s), 861-862 pp, 2000.
  Tang, H. C.; Nguyen, T.; Chuang, T. J.; Chin, J. W.; Wu, H. F.; Lesko, J.
• Ten Observations From Experiments to Quantify Water Movement and Porosity Percolation in Hydrating Cement Pastes.
  Transport Properties and Concrete Quality Workshop. Materials Science of Concrete Special Volume. Proceedings. October 10-12, 2005, Tempe, AZ, John Wiley and Sons, Inc., NY, Mobasher, B.; Skalny, J., Editor(s)(s), 3-18 pp, 2005.
  Bentz, D. P.
• Tensile and Nondestructive Testing of FRP Bars.
  Journal of Composites for Construction, Vol. 2, No. 1, 17-27, February 1998.
  Castro, P. F.; Carino, N. J.
• Ternary Zeotropic Mixture With CO2 Component for R-22 Heat Pump Application.
  CLIMA 2000 Conference, Proceedings. August 30-September 2, 1997, Brussels, Belgium, 1-9 pp, 1997.
  Maczek, K.; Muller, J.; Wojtas, K.; Domanski, P. A.
• Terrain Aided Localization of Autonomous Vehicles.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 511-518 pp, 2002.
  Madhavan, R.
• Testing and Modeling of Fresh Concrete Rheology.
  NISTIR 6094; 69 p. February 1998.
  Ferraris, C. F.; deLarrard, F.
• Testing Conformance and Interoperability of BACnet Building Automation Products.
  CIBSE/ASHRAE Joint National Conference. September 28-October 1, 1996, Harrogate, UK, 1-7 pp, 1996.
  Bushby, S. T.
• Testing of Selected Self-Leveling Compounds for Floors.
  NISTIR 5633; 33 p. January 1995.
  Ferraris, C. F.
• Testing of Thermal Insulators.
  NIST SP 958; January 2001.Century of Excellence in Measurements, Standards, and Technology; A Chronicle of Selected Publications of NBS/NIST, 1901-2000. NIST SP 958, Lide, D. R., Editor(s), 10-13 pp, 2001.
  Zarr, R. R.
• Test Procedure Development for Residential Dishwashers.
  International Appliance Technical Conference, 50th Annual. Proceedings. Held in Cooperation With Purdue University. May 10-12, 1999, West Lafayette, IN, 320-331 pp, 1999.Appliance Engineer, Vol. 56, No. 8, 70-76, August 1999.
  Castro, N. S.
• Test Procedures for Advanced Insulation Panels.
  Alliance for Responsible Atmospheric Policy; U.S. Environmental Protection Agency; Environment Canada and United National Environmental Program. International CFC and Halon Alternatives Conference, 1994. Stratospheric Ozone Protection for the 90's. October 24-26, 1994, Washington, DC, 1994 AND National Institute of Building Sciences/Building Environment and Thermal Envelope Council. Super Insulations and the Building Envelope. Proceedings. November 14, 1995, Washington, DC, 149-161 pp, 1995, 1994.
  Fanney, A. H.; Saunders, C. A.; Hill, S. D.
• Test Requirements for Base Isolation.
  U.S./Japan Cooperative Program in Natural Resources. Panel on Wind and Seismic Effects. Joint Meeting, 27th. Proceedings. Public Works Research Institute Technical Memorandum 3387. May 16-19, 1995, Tsukuma, Japan, 81-87 pp, 1995.
  Shenton, H. W., III; Taylor, A. W.; Lew, H. S.
• Theoretical Evaluation of the Vapor Compression Cycle With a Liquid-Line/Suction-Line Heat Exchanger, Economizer, and Ejector.
  NISTIR 5606; 37 p. March 1995.
  Domanski, P. A.
• Theoretical Predictions for the Mechanical Response of a Model Quartz Crystal Microbalance to Two Viscoelastic Media: A Thin Sample layer and Surrounding Bath Medium.
  Journal of Chemical Physics, Vol. 3, No. 24, 11192-11206, December 22, 1999.
  White, C. C.; Schrag, J. L.
• Thermal Lattice-Boltzmann Models (TLBM) for Compressible Flows.
  Discrete Simulation of Fluids, 7th International Conference. Proceedings. July 14-18, 1998, Oxford, England, 1998.International Journal of Modern Physics C, Vol. 9, No. 8, 1247-1261, 1998.
  Vahala, G.; Pavlo, P.; Vahala, L.; Martys, N. S.
• Thermal Modeling of Multiple-Line-Heat-Source Guarded Hot Plate Apparatus.
  Insulation Materials: Testing and Applications, 4th Volume. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 79-97 pp, 2002.
  Healy, W. M.; Flynn, D. R.
• Thermal Performance of Fire Resistive Materials III. Fire Test on a Bare Steel Column.
  NISTIR 7576; 83 p. April 2009.
  Bentz, D. P.; Hanssen, L. M.; Wilthan, B.
• Thermal Performance of Residential Electric Water Heaters Subjected to Various Off-Peak Schedules.
  American Society of Mechanical Engineers (ASME); Japan Solar Energy Society (JSES); and Korean Solar Energy Society (KSES). International Solar Energy Conference, 1992. Volume 2. April 5-9, 1992, Maui, HI, American Society of Mechanical Engineers, New York, NY, Stine, W.; Kreider, J.; Watanabe, K., Editor(s)(s), 1221-1230 pp, 1992.Journal of Solar Energy Engineering, Vol. 118, 73-80, May 1996.
  Fanney, A. H.; Dougherty, B. P.
• Thermal Performance of Residential Electric Water Heaters Using Alternative Blowing Agents.
  ASHRAE Transactions 2000, Vol. 106, No. 2, 1-13, July 2000.
  Fanney, A. H.; Zarr, R. R.; Ketay-Paprocki, J. D.
• Thermodynamic and Heat Transfer Implications of Working Fluid Mixtures in Rankine Cycles.
  International Journal of Heat and Fluid Flow, Vol. 10, No. 2, 90-102, June 1989.
  Radermacher, R.
• Thermophysical Property Need for the Environmentally-Acceptable Halocarbon Refrigerants.
  Thermophysical Properties, 10th Symposium. Proceedings. June 20-23, 1988, Gaithersburg, MD, 1988.
  McLinden, M. O.; Didion, D. A.
• Third International Green Building Conference and Exposition, 1996.
  NIST SP 908; 225 p. November 1996.U.S. Green Building Council (USGBC) and the National Institute of Standards and Technology. Green Building Conference and Exposition, 3rd International. Proceedings. November 17-19, 1996, San Diego, CA, Fanney, A. H.; Svincek, P. R., Editor(s)(s), 1996.
  Fanney, A. H.; Svincek, P. R.
• Three-Dimensional Cement Hydration and Microstructure Program. I. Hydration Rate, Heat of Hydration, and Chemical Shrinkage.
  NISTIR 5756; 54 p. November 1995.
  Bentz, D. P.
• Three-Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development.
  Journal of the American Ceramic Society, Vol. 80, No. 1, 3-21, 1997.
  Bentz, D. P.
• Three-Dimensional Mathematical Analysis of Particle Shape Using X-Ray Tomography And Spherical Harmonics: Application To Aggregates Used In Concrete.
  Cement and Concrete Research, Vol. 32, No. 10, 1621-1638, October 2002.
  Garboczi, E. J.
• Three-Dimensional Shape Analysis of Coarse Aggregates: New Techniques for and Preliminary Results on Several Different Coarse Aggregates and Reference Rocks.
  Cement and Concrete Research, Vol. 36, No. 9, 1619-1627, September 2006.
  Erdogan, S. T.; Quiroga, P. N.; Fowler, D. W.; Saleh, H. A.; Livingston, R. A.; Garboczi, E. J.; Ketcham, P. M.; Hagedorn, J. G.; Satterfield, S. G.
• Three-Phase Model of the Elastic and Shrinkage Properties of Mortar.
  Advanced Cement Based Materials, Vol. 4, 6-20, March 1996.
  Neubauer, C. M.; Jennings, H. M.; Garboczi, E. J.
• Time-Dependent Diffusivities: Possible Misinterpretation Due to Spatial Dependence.
  Testing and Modeling the Chloride Ingress Into Concrete. Proceedings. 2nd International RILEM Workshop. September 11-12, 2000, Paris, France, 225-233 pp, 2000.
  Bentz, D. P.; Feng, X.; Hooton, R. D.
• Time-Dependent Wind Effects: Database-Assisted Design and Estimation of Ultimate Limit States for Rigid and Flexible Structures.
  Structural Dynamics, 5th European Conference. EURODYN2002. Proceedings. Septemer 2-5, 2002, Munich, Germany, 441-443 pp, 2002.
  Sadek, F.; Simiu, E.; Jong, S.; Lu, L. W.
• Tool for Modeling Airflow and Contaminant Transport.
  ASHRAE Journal, Vol. 43, No. 3, 35-42, March 2001.
  Dols, W. S.
• Tool to Improve Efficiency in Large Scale Manufacturing.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 205-210SARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 197-202 pp, 2002.
  Bostelman, R.; Shackleford, W.; Proctor, F.; Albus, J.; Lytle, A. M.
• Tornado Aftermath: Questioning the Tools.
  ASCE Civil Engineering Magazine, 1A-6A, December 1998.
  Phan, L. T.; Simiu, E.
• Toward Next-Generation Construction Machines.
  American Nuclear Society. Proceedings. March 4-8, 2001, Seattle, WA, 2001.
  Bostelman, R.; Albus, J.; Stone, W. C.
• Toward Open Network Data-Exchange Protocols for Construction Metrology and Automation: Liveview.
  Automation and Robotics in Construction, 16th IAARC/IFAC/IEEE International Symposium. ISARC'99. Proceedings. September 22-24, 1999, Madrid, Spain, Universidad Carlos III de Madrid (UC3M), Spain, Balaguer, C., Editor(s), 117-122 pp, 1999.
  Pfeffer, L. E.; Latimer, D. T., IV
• Towards a Global Agenda for Fire Research.
  Technical Basis for Performance Based Fire Regulations. A Discussion of Capabilities, Needs and Benefits of Fire Safety Engineering. United Engineering Foundation Conference. Proceedings. United Engineering Foundation, Inc. January 7-11, 2001, San Diego, CA, United Engineering Foundation, Inc., New York, NY, Cox, G., Editor(s), 11-19 pp, 2001.
  Snell, J. E.
• Towards a Methodology for the Characterization of Fire Resistive Materials With Respect to Thermal Performance Models.
  Fire and Materials, Vol. 30, No. 4, 311-321, July/August 2006.
  Bentz, D. P.; Prasad, K. R.; Yang, J. C.
• Towards Engineered Fire Safety: A Global Research Strategy for the 21st Century.
  Fire Research Development and Application in the 21st Century. FORUM 2000 Symposium. Organized by Architectural and Building Research Institute (ABRI), MOI, and FORUM for International Cooperation in Fire Research. Proceedings. October 23-24, 2000, Taipei, Taiwan, 1-23 pp, 2000.
  Snell, J. E.
• Towards Prediction of Building Service Life: The Standards Imperative.
  Durability of Building Materials and Components. International Conference, 7th. Chapter 147. Volume 2. Testing, Design and Standardization. Proceedings. May 19-23, 1996, Stockholm, Sweden, E. & F. N. Spon, New York, Sjostrom, C., Editor(s), 1417-1428 pp, 1996.
  Frohnsdorff, G. J. C.; Martin, J. W.
• Towards the Ultimate Construction Site Sensor.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 393-400 pp, 2002.
  Stone, W. C.; Juberts, M.
• Toxicity of Smoke During Chair Smoldering Tests and Small Scale Tests Using the Same Materials.
  Fundamental and Applied Toxicology, Vol. 3, No. 6, 619-626, 1983.
  Alarie, Y. C.; Stock, M. F.; Matijak-Schaper, M.; Birky, M. M.
• Transient Analysis of VOC Concentrations for Estimating Emission Rates.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 189-194 pp, 2002.
  Persily, A. K.; Howard-Reed, C.; Nabinger, S. J.
• Transitions to Chaos Induced by Additive and Multiplicative Noise.
  Towards the Harnessing of Chaos, Elsevier Science B.V., NY, Yamaguti, M., Editor(s), 405-408 pp, 1994.
  Simiu, E.; Frey, M. R.
• Transport in Sandstone: A Study Based on Three Dimensional Microtomography.
  Geophysical Research Letters, Vol. 23, No. 7, 705-708, April 1, 1996.
  Auzerais, F. M.; Dunsmuir, J.; Ferreol, B. B.; Martys, N. S.; Olson, J.; Ramakrishnan, T. S.; Rothman, D. H.; Schwartz, L. M.
• Transport Properties and Durability of Concrete: Literature Review and Research Plan.
  NISTIR 6395; 46 p. September 1999.
  Bentz, D. P.; Clifton, J. R.; Ferraris, C. F.; Garboczi, E. J.
• Tribute to James R. Clifton (1933-1999).
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. November 9-10, 1998, ix-x pp, 1999.
  Frohnsdorff, G. J. C.
• Tsunami and Storm Surge Characteristics Based on Long-Term Tide Observations.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 23-32 pp, 1998.
  Nagai, T.; Sugahara, K.; Watanabe, H.; Kawaguchi, K.; Mihara, M.; Takashima, K.
• Two New Canadian Test Methods for Measuring the Flammability of Fabrics.
  Canadian Textile Journal, Vol. 80, 41-51, September 27, 1963.
  Richards, H. R.
• Two Refrigerant Mixtures and the Hard Sphere Fluid.
  HI-85-18 No. 3;ASHRAE Technical Data Bulletin 54 AND ASHRAE Transactions, Vol. 91, No. 2B, June 1985.
  Morrison, G.; McLinden, M.
• Tying Together Theory and Tests via Virtual Testing.
  Stone, Sand and Gravel Review, 10-11, January/February 2006.
  Garboczi, E. J.
• Typical Manufacturing Flaws in FRP Retrofit Applications.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/97-101 pp, 1999.
  Hawkins, G. F.; Johnson, E.; Nokes, J.

U

• Ultimate Strength of Masonry Shear Walls: Predictions VS Test Results.
  NISTIR 4633; 46 p. October 1991.
  Fattal, S. G.; Todd, D. R.
• Ultimate Wind Loads and Direction Effects in Non-Hurricane and Hurricane-Prone Regions.
  Environmetrics, Vol. 9, 433-444, 1998.
  Simiu, E.; Heckert, N. A.
• Ultrasonic Evaluation Methods Applicable to Polymer Concrete Composites.
  NISTIR 6975; 73 p. April 2003.
  Garbacz, A.; Garboczi, E. J.
• Ultrasonic Extraction/Anodic Stripping Voltammetry for Determining Lead in Dust: A Laboratory Evaluation.
  NISTIR 6998; 47 p. October 2004.
  Rossiter, W. J., Jr.; Toman, B.; McKnight, M. E.; Emenanjo, I.; Anaraki, M. B.
• Ultrasonic Extraction/Anodic Stripping Voltammetry for Determining Lead in Dust: Analyses of Field-Sampled Wipes.
  NISTIR 7109; 33 p. October 2004.
  Rossiter, W. J., Jr.; Toman, B.; McKnight, M. E.; Emenanjo, I.
• Ultrasonic Extraction/Anodic Stripping Voltammetry for Determining Lead in Household Paint: A Laboratory Evaluation.
  NISTIR 6571; 64 p. April 2001.
  Rossiter, W. J., Jr.; Vangel, M. G.; McKnight, M. E.; Signor, A.; Byrd, W. E.
• Ultraviolet Chambers Based on Integrating Spheres for Use in Artificial Weathering.
  Annual Meeting, 70th. Federation of Societies for Coatings Technology (FSCT). Proceedings. November 5-7, 2001, Atlanta, GA, 1-16 pp, 2002.Journal of Coatings Technology, Vol. 74, No. 929, 39-44, June 2002.
  Chin, J. W.; Byrd, W. E.; Embree, E. J.; Martin, J. W.; Tate, J. D.
• Ultraviolet Chambers Based on Integrating Spheres for Use in Artificial Weathering.
  Annual Meeting, 70th. Federation of Societies for Coatings Technology (FSCT). Proceedings. November 5-7, 2001, Atlanta, GA, 1-16 pp, 2002.Journal of Coatings Technology, Vol. 74, No. 929, 39-44, June 2002.
  Chin, J. W.; Byrd, W. E.; Embree, E. J.; Martin, J. W.; Tate, J. D.
• UML-XML-RDB Model Mapping Solution for Facilitating Information Standardization and Sharing in Construction Industry.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 317-321 pp, 2002.
  Wu, I. C.; Hsieh, S. H.
• Undulations in Salt-Free Charged Lamellar Phases Detected by Small Angle Neutron Scattering and Neutron Reflectivity.
  Langmuir, Vol. 16, No. 1, 102-107, 2000.
  Salamat, G.; deVries, R.; Kaler, E. W.; Satija, S.; Sung, L. P.
• Undulations in Salt-Free Charged Lamellar Phases Detected by Small Angle Neutron Scattering and Neutron Reflectivity.
  Langmuir, Vol. 16, No. 1, 102-107, 2000.
  Salamat, G.; deVries, R.; Kaler, E. W.; Satija, S.; Sung, L. P.
• Unified Model for the Degradation of Organic Coatings on Steel in a Neutral Electrolyte.
  Annual Meeting, 73rd. Federation of Societies for Coatings Technology (FSCT). Proceedings. October 10, 1995, St. Louis, MO, 1995.Journal of Coatings Technology, Vol. 68, No. 855, 45-56, April 1996.
  Nguyen, T.; Hubbard, J. B.; Pommersheim, J. M.
• Unified Theory of Deterministic and Noise-Induced Transitions: Melnikov Processes and Their Application in Engineering, Physics and Neuroscience.
  Stochastic and Chaotic Dynamics in the Lakes: STOCHAOS. CP502, American Institute of Physics, Broomhead, D. S.; Luchinskaya, E. A.; McClintock, P. V. E.; Mullin, T., Editor(s)(s), 266-271 pp, 2000.
  Simiu, E.
• UNIFORMAT II Elemental Classification for Building Specifications, Cost Estimating, and Cost Analysis.
  NISTIR 6389; 103 p. October 1999.
  Charette, R. P.; Marshall, H. E.
• Universal Scaling of Fluid Permeability for Sphere Packings.
  Physical Review E, Vol. 50, No. 1, 403-402, July 1994.
  Martys, N. S.; Torquato, S.; Bentz, D. P.
• Unmanned Construction System: Present Status and Challenges.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 241-246 pp, 2002.
  Ban, Y.
• Unreacted Cement Content in Macro-Defect-Free Composites: Impact on Processing-Structure-Property Relations.
  Journal of Materials Science, Vol. 29, 6445-6452, 1994.
  Desai, P. G.; Lewis, J. A.; Bentz, D. P.
• Use of Aerodynamic Databases for the Effective Estimation of Wind Effects in Main Wind-Force Resisting Systems: Application to Low Buildings.
  Journal of Wind Engineering and Industrial Aerodynamics, Vol. 77-78, 685-693, 1998.
  Whalen, T. M.; Simiu, E.; Harris, G.; Lin, J.; Surry, D.
• Use of Computational Fluid Dynamics to Analyze Indoor Air Quality Issues.
  NISTIR 5997; 48 p. April 1997.
  Emmerich, S. J.
• Use of Computer Simulations to Interpret and Understand Electrical Measurements.
  Electrically Based Microstructural Characterization II, Materials Research Society Symposium Proceedings. Volume 500. December 1-4, 1997, Boston, MA, Materials Research Society, Warrendale, PA, 291-301 pp, 1998.
  Garboczi, E. J.
• Use of Digital Images to Determine Deformation Throughout a Microstructure. Part 1. Deformation Mapping Technique.
  Journal of Materials Science, Vol. 35, 5741-5749, 2000.
  Neubauer, C. M.; Garboczi, E. J.; Jennings, H. M.
• Use of Fluorescence to Measure the Lubricant Excess Surface Density During Pool Boiling.
  NISTIR 6727; 51 p. January 2001.
  Kedzierski, M. A.
• Use of Integrating Spheres as Uniform Sources for Accelerated UV Weathering of Advanced Materials.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, American Chemical Society, Washington, DC, 145-146 pp, 2000.
  Chin, J. W.; Martin, J. W.; Embree, E. J.; Byrd, W. E.
• Use of Laser Scanning Confocal Microscopy for Characterizing Changes in Film Thickness and Local Surface Morphology of UV Exposed Polymer Coatings.
  Journal of Coatings Technology Research, Vol. 1, No. 4, 267-276, 2004.
  Sung, L. P.; Jasmin, J.; Gu, X.; Nguyen, T.; Martin, J. W.
• Use of Laser Scanning Confocal Microscopy for Quantitative Characterization of Physical Changes of Polymer Coatings After UV Exposure.
  Federation of Societies for Coatings Technology (FSCT) Technical Program Annual Meeting, 81st. November 12-14, 2003, Philadelphia, PA, Federation of Societies for Coatings Technology, Blue Bell, PA, 2003.
  Sung, L. P.; Jasmin, J.; Gu, X.; Nguyen, T.; Martin, J. W.
• Use of Nomenclature in Dispersion Science and Technology. NIST Recommended Practice Guide.
  NIST SP 960-3; 72 p. August 2001.
  Hackley, V. A.; Ferraris, C. F.
• Use of Nomenclature in Dispersion Science and Technology. NIST Recommended Practice Guide.
  NIST SP 960-3; 72 p. August 2001.
  Hackley, V. A.; Ferraris, C. F.
• Use Questionnaire and AHP Techniques to Develop Subcontractor Selection System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 35-40 pp, 2002.
  Shiau, Y. C.; Tsai, T. P.; Wang, W. C.; Huang, M. L.
• User Manual for Finite Element and Finite Difference Programs: A Parallel Version of NISTIR 6269.
  NISTIR 6997; 276 p. June 19, 2003.
  Bohn, R. B.; Garboczi, E. J.
• User Preferences for Life-Cycle Decision Support Tools: Evaluation of a Survey of BEES Users.
  NISTIR 6874; 162 p. July 2002.
  Hofstetter, P.; Lippiatt, B. C.; Bare, J. C.; Rushing, A. S.
• User's Guide to the NIST Virtual Cement and Concrete Testing Laboratory. Version 1.0.
  NISTIR 6583; 54 p. November 2000.
  Bentz, D. P.; Forney, G. P.
• User's Guide to the NIST Virtual Cement and Concrete Testing Laboratory. Version 1.0.
  NISTIR 6583; 54 p. November 2000.
  Bentz, D. P.; Forney, G. P.
• User's Guide to the Virtual Cement and Concrete Testing Laboratory Version 1.1.
  NISTIR 6968; 54 p. March 2003.
  Bullard, J. W.
• Using BEES to Select Cost-Effective Green Products.
  International Journal of Life Cycle Assessment, Vol. 6, No. 2, 76-80, 2001.
  Lippiatt, B. C.; Boyles, A. S.
• Using Concrete Service Life Prediction Models to Estimate the Life-Cycle Costs of Concrete Structures.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.10. November 9-10, 1998, 17-18 pp, 1999.
  Ehlen, M. A.
• Using Customized Navigational Models to Deliver More Efficient Interaction With Mobile Computing Devices on Construction Sites.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 323-328 pp, 2002.
  Reinhardt, J.; Akinci, B.; Garrett, J. H., Jr.
• Using Data Envelopment Analysis to Assess Performance of Manufacturing Extension Centers.
  NISTIR 6198; 57 p. August 1998.
  Chapman, R. E.
• Using Emulators to Evaluate the Performance of Building Energy Management Systems.
  94-23-4;ASHRAE Transactions, Vol. 100, No. 1, [pages unknown], January 1994.
  Kelly, G. E.; May, W. B.; Kao, J. Y.; Park, C.
• Using Finite Element Analysis to Design a New Guarded Hot Plate Apparatus for Measuring the Thermal Conductivity of Insulating Materials.
  ANSYS Users Group Conference Proceedings. October 2, 2001, College Park, MD, 1-9 pp, 2001.
  Healy, W. M.
• Using Impedance Spectroscopy to Assess the Viability of the Rapid Chloride Test for Determining Concrete Conductivity.
  Journal of Research of the National Institute of Standards and Technology, Vol. 105, No. 4, 497-509, July/August 2000.
  Snyder, K. A.; Ferraris, C. F.; Martys, N. S.; Garboczi, E. J.
• Using LADAR to Characterize the 3-D Shape of Aggregates: Preliminary Results.
  Cement and Concrete Research, Vol. 36, No. 6, 1072-1075, June 2006.
  Garboczi, E. J.; Cheok, G. S.; Stone, W. C.
• Using Thermoanalytical Techniques to Characterize Roof Membrane Materials.
  Challenges of the 21st Century. Roofing Technology, Fourth (4th) International Symposium. Proceedings. First (1st) Edition. U.S. National Institute of Standards and Technology, U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, 58-65 pp, 1997.
  Paroli, R. M.; Delgado, A. H.; Rossiter, W. J., Jr.; Flueler, P.
• Using the Virtual Cybernetic Building Testbed and FDD Test Shell for FDD Tool Development.
  NISTIR 6818; 45 p. October 2001.
  Bushby, S. T.; Castro, N. S.; Galler, M. A.; Park, C.; House, J. M.
• Using VRML in Construction Industry Applications.
  Web3D: VRML 2000 Symposium. Proceedings. February 21-24, 2000, Monterey, CA, 1-7 pp, 2000.
  Lipman, R. R.; Reed, K. A.
• U.S.-Japan Cooperative Earthquake Engineering Research Program on Composite and Hybrid Structures: Current Status of Japan Side Research.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 443-451 pp, 1998.
  Nishiyama, I.; Hiroyuki, I.; Hiraishi, H.
• U.S.-Japan Cooperative Earthquake Engineering Research Program on Composite and Hybrid Structures: U.S.-Side Progress.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 452-455 pp, 1998.
  Goel, S. C.
• U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 26th. May 17-20,
  NIST SP 871; NIST Special Publication 871; September 1994.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 26th. May 17-20, 1994, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 731 pp, 1994.
  Raufaste, N. J., Jr.
• Utilizing Radio Frequency Identification on Precast Concrete Components: Supplier's Perspective.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 381-386 pp, 2002.
  Akinci, B.; Patton, M.; Ergen, E.

V

• Validation and Modification of the 4SIGHT Computer Program.
  NISTIR 6747; 85 p. May 2001.
  Snyder, K. A.
• Validation of CONTAMW Predictions for Tracer Gas in a Townhouse.
  Building Simulation 2003, 8th International Building Performance Simulation Association (IBPSA) Conference. Proceedings. August 11-14, 2003, Eindhoven, Netherlands, 299-306 pp, 2003.
  Emmerich, S. J.; Nabinger, S. J.; Gupte, A.; Howard-Reed, C.
• Value of Handheld Computers in Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 557-562 pp, 2002.
  Saidi, K. S.; Haas, C. T.; Balli, N. A.
• Vapor Compression Heat Pump Cycle With Desorber/Absorber Heat Exchange.
  International Congress on Refrigeration, 18th. Proceedings. August 1987, Vienna, Austria, 1987.
  Radermacher, R.
• Variability in Energy Factor Test Results for Residential Electric Water Heaters.
  HVAC&R Research, Vol. 9, No. 4, 435-449, October 2003.
  Healy, W. M.; Lutz, J. D.; Lekov, A. B.
• Variable Dampers for Semi-Active Control of Flexible Structures.
  Earthquake Engineering, 6th U.S. National Conference. Proceedings. Paper No. 61. Earthquake Engineering Research Institute, Oakland, CA. 1998, 1-12 pp, 1998.
  Sadek, F.; Mohraz, B.
• Velocity Verlet Algorithm for Dissipative-Particle-Dynamics-Based Model of Suspensions.
  Physical Review E, Vol. 59, No. 3, 3733-3736, March 1999.
  Martys, N. S.; Mountain, R. D.
• Ventilation Characterization of a New Manufactured House.
  Ventilation, Humidity Control and Energy Proceedings. Air Infiltration and Ventilation Centre (AIVC) Conference and Building Environment and Thermal Envelope Council (BETEC) Conference, 24th. Proceedings. (International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems Program. Annex V: Air Infiltration and Ventilation Centre.) October 14, 2003, Washington, DC, 295-300 pp, 2003.
  Persily, A. K.; Crum, E. C.; Nabinger, S. J.; Lubliner, M.
• Ventilation, Energy and IAQ Impacts of Mechanical Ventilation in a U.S. Dwelling.
  ISIAQ: Indoor Air 99 Conference. Volume 2. Proceedings. August 8-13, 1999, Edinburgh, Scotland, 350-355 pp, 1999.
  Persily, A. K.
• Ventilation Rates in U.S. Office Buildings From the EPA Base Study.
  Indoor Air Quality and Climate, 10th International Conference. Indoor Air 2005. Proceedings. September 4-9, 2005, Beijing, China, 917-921 pp, 2005.
  Persily, A. K.; Gorfain, J.; Brunner, G.
• Ventilation Strategies for U.S. Manufactured Homes.
  Health Buildings 2000, 6th International Conference. Proceedings. Volume 2. Design and Operation of HVAC Systems. August 6-10, 2000, Espoo, Finland, 291-296 pp, 2000.
  Persily, A. K.
• Vibration Control of Tall Buildings Using Mega Subconfiguration.
  Journal of Engineering Mechanics, Vol. 123, No. 6, 650-651, June 1997.
  Sadek, F.; Mohraz, B.
• Virtual Cement and Concrete.
  Portland Cement Association (PCA). Emerging Technologies Symposium on Cement in the 21st Century. Proceedings. March 15, 1995, 1995.
  Frohnsdorff, G. J. C.; Clifton, J. R.; Garboczi, E. J.; Bentz, D. P.
• Virtual Cement and Concrete Testing Laboratory Consortium Annual Report 2001.
  NISTIR 6840; 32 p. December 2001.
  Bentz, D. P.
• Virtual Cement and Concrete Testing Laboratory Consortium.
  NISTIR 6962; 41 p. January 2003.
  Bullard, J. W.
• Virtual Cement. Chapter 10.3.
  Innovations in Portland Cement Manufacturing. Chapter 10.3, Portland Cement Association, Skokie, IL, Bhatty, J. I.; Miller, F. M.; Kosmatka, S. H., Editor(s), 1311-1331 p., 2004.
  Bullard, J. W.; Ferraris, C. F.; Garboczi, E. J.
• Virtual Permeametry on Microtomographic Images.
  Journal of Petroleum Science and Engineering, Vol. 45, No. 1/2, 41-46, 2004.
  Arns, C. H.; Knackstedt, M. A.; Pinczewski, W. V.; Martys, N. S.
• Virtual Pervious Concrete: Microstructure, Percolation, and Permeability.
  ACI Materials Journal, Vol. 105, No. 3, 297-301, May/June 2008.
  Bentz, D. P.
• Virtual Testing of Cement and Concrete-USA 2004.
  Concrete International, Vol. 26, No. 12, 33-37, December 2004.
  Garboczi, E. J.; Bullard, J. W.; Bentz, D. P.
• Virtual Testing of Ready-Mixed Concrete.
  Concrete in FOCUS, Vol. 3, No. 1, 38-41, Spring 2004.
  Bullard, J. W.; Obla, K.
• Virtural Rapid Chloride Permeability Test.
  Cement and Concrete Composites, Vol. 29, No. 10, 723-731, November 2007.
  Bentz, D. P.
• Visible Cement Data Set.
  Journal of Research of the National Institute of Standards and Technology, Vol. 107, No. 2, 137-148, March/Arpil 2002.
  Bentz, D. P.; Mizell, S.; Satterfield, S. G.; Devaney, J. E.; George, W. L.; Ketcham, P. M.; Graham, J. R.; Porterfield, J. E.; Quenard, D. A.; Vallee, F. A.; Sallee, H
• Vision for the Future of Strong-Motion Recording.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 50-54 pp, 1998.
  Borcherdt, R. D.
• Visualization of Nucleate Flow Boiling for an R22/R114 Mixture and Its Components.
  Experimental Heat Transfer, Vol. 3, 447-463, 1990.
  Kedzierski, M. A.; Didion, D. A.
• Visualization of Structural Steel Product Models.
  Electronic Journal of Information Technology in Construction, Vol. 8, 51-64, 2003.
  Lipman, R. R.; Reed, K. A.
• Visual Measurement Technique for Analysis of Nucleate Flow Boiling.
  NISTIR 5519; 96 p. October 1994.
  Kedzierski, M. A.; Crowder, J. M.; Jacobi, A. M.; Zhang, L.
• Volume Matching Control: Leave the Outdoor Air Damper Wide Open.
  ASHRAE Journal, Vol. 40, No. 2, 58-60, February 1998.
  Seem, J. E.; House, J. M.; Klaassen, C. J.

W

• Warping of Terrace Pavers at the U.S. Capitol Building.
  NISTIR 5847; 25 p. May 1996.
  Ferraris, C. F.; Stutzman, P. E.; Clifton, J. R.
• Water at the Polymer/Substrate Interface and Its Role in the Durability of Polymer/Glass Fiber Composites.
  Durability of Fibre Reinforced Polymer (FRP) Composites for Construction (CDCC'98), 1st International Conference. Proceedings. August 1998, Canada, Benmokrane, B.; Rahman, H., Editor(s)(s), 451-462 pp, 1998.
  Nguyen, T.; Byrd, W. E.; Alsheh, D.; Aouadi, K.; Chin, J. W.
• Water Movement During Internal Curing: Direct Observation Using X-Ray Microtomography.
  Concrete International, Vol. 28, No. 10, 39-45, October 2006.
  Bentz, D. P.; Halleck, P. M.; Grader, A. S.; Roberts, J. W.
• Water Permeability and Chloride Ion Diffusion in Portland Cement Mortars: Relationship to Sand Content and Critical Pore Diameter.
  Cement and Concrete Research, Vol. 25, No. 4, 790-802, 1995.
  Halamickova, P.; Detwiler, R. J.; Bentz, D. P.; Garboczi, E. J.
• Water-to-Water Heat Pump Using Hydrocarbon and Hydrofluorocarbon Zeotropic Mixtures With and Without an Internal Heat Exchanger.
  NISTIR 6449; 20 p. January 2000.
  Payne, W. V.; Silk, E. A.; Domanski, P. A.
• Water-Vapor Measurements of Low-Slope Roofing Materials.
  NISTIR 5681; 32 p. July 1995.
  Burch, D. M.; Desjarlais, A. O.
• Welcome.
  NISTIR 6774; August 2001.Workshop on Fire Testing Measurement Needs. Proceedings. Appendix V: Presentations. A: Welcome. June 18-19, 2001, Gaithersburg, MD, Grosshandler, W. L., Editor(s), 24-26 pp, 2001.
  Snell, J. E.
• What's the Buzz: Use BEES to Design Greener, Lower-Cost Buildings.
  Architectural Record, 181-181, October 2000.
  Lippiatt, B. C.
• Wind and Seismic Research for Improved Engienering Consensus Standards and Housing Construction.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 433-439 pp, 1998.
  Crandell, J. H.; Freeborne, W.
• Wind Direction and Hurricane-Induced Ultimate Wind Loads.
  European and African Conference on Wind Engineering (2 EACWE), 2nd. Proceedings. Volume 2. June 22-27, 1997, Genova, Italy, Solari, G., Editor(s), 1825-1831 pp, 1998.Journal of Wind Engineering and Industrial Aerodynamics, Vol. 74, No. 76, 1037-1046, 1998.
  Simiu, E.; Heckert, N. A.
• Wind Direction and Hurricane-Induced Ultimate Wind Loads.
  European and African Conference on Wind Engineering (2 EACWE), 2nd. Proceedings. Volume 2. June 22-27, 1997, Genova, Italy, Solari, G., Editor(s), 1825-1831 pp, 1998.Journal of Wind Engineering and Industrial Aerodynamics, Vol. 74, No. 76, 1037-1046, 1998.
  Simiu, E.; Heckert, N. A.
• Wind Engineering. Report of Task Committee D.
  Technical Memorandum of PWRI 4075; Report of Task Committee D;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 39th. Technical Memorandum of PWRI 4075. Proceedings. May 14-16, 2007, Tsukuba, Japan, 462-463 pp, 2007.
  Main, J. A.; Sarkar, P.; Caracoglia, L.; Okuda, Y.; Murakoshi, J.; Togashi, M.; Kikitsu, H.; Josen, Y.
• Wind-Induced Peak Bending Moments in Low-Rise Building Frames.
  Journal of Engineering Mechanics, Vol. 126, No. 8, 879-881, August 2000.
  Gioffre, M.; Grigoriu, M.; Kasperski, M.; Simiu, E.
• Wireless Sensor Networks as Part of a Web-Based Building Environmental Monitoring System.
  Automation in Construction, Vol. 17, No. 6, 729-736, August 2008.
  Jang, W. S.; Healy, W. M.; Skibniewski, M. J.
• Workability, Mechanical Properties, and Chemical Stability of a Recycled Tyre Rubber-Filled Cementitious Composite.
  Journal of Materials Science, Vol. 33, 1745-1752, 1998.
  Raghavan, D.; Huynh, H.; Ferraris, C. F.
• Workability of Self-Compacting Concrete.
  High Performance Concrete International Symposium. Economical Solution for Durable Bridges and Transportation Structures. Proceedings. PCI/FHWA/FIB. September 25-27, 2000, Orlando, FL, 398-407 pp, 2000.
  Ferraris, C. F.; Brower, L.; Ozyildirim, C.; Daczko, J.
• Working Group Reports 1-8. Final Discussion and Recommendations.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Working Group Reports 1-8. Final Discussion and Recommendations. November 9-10, 1998, 19-34 pp, 1999.
  National Institute of Standards and Technology; American Concrete Institute; American Society for Testing and Materials
• Working Group Reports.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 69-80 pp, 1999.
  Kissell, R.; Appleman, B. R.; Barno, D.; Fowler, D.
• Workplan to Analyze the Energy Impacts of Envelope Airtightness in Office Buildings.
  NISTIR 5758; 31 p. December 1995.
  Emmerich, S. J.; Persily, A. K.; VanBronkhorst, D. A.
• Workshop Introduction.
  NISTIR 5856; May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. Chapter One: Topical Lectures. Paper 1.1. March 20-31, 1995, 1-10 pp, 1995.
  Wright, R. N.
• Workshop on the Seismic Rehabilitation of Lightly Reinforced Concrete Frames. Proceedings. June 12-13, 1995. Gaithersburg, Maryland.
  NISTIR 5741; 176 p. November 1995.National Institute of Standards and Technology and the U.S. Corps of Engineers. Workshop on the Seismic Rehabilitation of Lightly Reinforced Concrete Frames. Proceedings. June 12-13, 1995, Gaithersburg, MD, Cheok, G. S., Editor(s), 1995.
  Cheok, G. S.
• World Trade Center Investigation Status. NIST Response to the World Trade Center Disaster. (Status of World Trade Center Investigation and Discussion.)
  National Construction Safety Team Advisory Committee Meeting. Construction Safety Investigations. October 19, 2004, Gaithersburg, MD, 98 pp, 2004.
  Shyam Sunder, S.
• WTC Towers : Innovative Design Features and Structural Modeling.
  TS 3-7-5 Fire Engineering (1);Tall Buildings in Historical Cities: Culture and Technology for Sustainable Cities. Volume 2. Proceedings. Council on Tall Buildings and Urban Habitat (CTBUH) 2004 Seoul Conference. October 10-13, 2004, Seoul, Korea, Lee, L. H.; Klemencic, R.; Kim, S. D., Editor(s)(s), 1150-1153 pp, 2004.
  Lew, H. S.; Sadek, F.

X

• XPS Study on the Effects of Pigment on the UV Degradation of an Epoxy System.
  Federation of Societies for Coatings Technology (FSCT) Technical Program Annual Meeting, 81st. November 12-14, 2003, Philadelphia, PA, Federation of Societies for Coatings Technology, Blue Bell, PA, 2003.
  Scierka, S.; Forster, A.; Kosik, W.
• X-Ray Absorption Studies of Drying of Cementitious Tile Adhesive Mortars.
  Cement and Concrete Composites, Vol. 30, No. 5, 361-373, May 2008.
  Bentz, D. P.; Haecker, C. J.; Peltz, M. A.; Snyder, K. A.
• X-Ray Microtomography of an ASTM C109 Mortar Exposed to Sulfate Attack.
  Materials Research Society. Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials. Materials Research Society Symposium Proceedings Volume 370. November 28-December 1, 1994, Boston, MA., Materials Research Society, Pittsburgh, PA, Diamond, S.; Mindess, S.; Glasser, F. P.; Roberts, L. W., Editor(s)(s), 77-82 pp, 1995.
  Bentz, D. P.; Martys, N. S.; Stutzman, P. E.; Levenson, M. S.; Garboczi, E. J.; Dunsmuir, J.; Schwartz, L. M.
• X-Ray Microtomography Studies of Air-Void Instability and Growth During Drying of Tile Adhesive Mortars.
  NISTIR 7532; 40 p. November 2008.
  Bentz, D. P.; Haecker, C. J.

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X