Building Titles

M

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X

• Maintenance and Modifications to Structural Systems. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1C; 169 p. September 2005.
  Fanella, D. A.; Derecho, A. T.; Ghosh, S. K.
• Manual for Ventilation Assessment in Mechanically Ventilated Commercial Buildings.
  NISTIR 5329; 129 p. January 1994.
  Persily, A. K.
• Manual of Evaluation Procedures for Passive Fire Prevention Following Earthquakes.
  NIST GCR 99-768; 25 p. June 1999.
  Williamson, R. B.
• Manufactured Homes - Probability of Failure and the Need for Better Windstorm Protection Through Improved Anchoring Systems.
  NISTIR 5370; 54 p. November 1994.
  Marshall, R. D.
• Manufactured Housing Walls That Provide Satisfactory Moisture Performance in All Climates.
  NISTIR 5558; 33 p. January 1995.
  Burch, D. M.; Saunders, C. A.; TenWolde, A.
• Manufactured Housing Walls That Provide Satisfactory Moisture Performance in All Climates.
  International Building Performance Simulation Association. Building Simulation '95. Building Simulation Conference, 4th Proceedings. August 14-16, 1995, Madison, WI, Intl. Building Performance Simulation Assoc., Mitchell, J. W.; Beckman, W. A., Editor(s)(s), 22-33 pp, 1995.
  Burch, D. M.; TenWolde, A.
• Manufacturing Extension Partnerships for the Construction Industry.
  Construction Business Review, 1-6, 1996.
  Sunder, S. S.; Cranmer, D. C.; Korchak, R.
• Mapping Between the CIMSteel Integration Standards and Industry Foundation Classes Product Models for Structural Steel.
  International Conference on Computing in Civil and Building Engineering (ICCCBE), Joint International 11th. Proceedings. June 14-16, 2006, Montreal, Canada, 1-10 pp, 2006.
  Lipman, R. R.
• Mapping Chemically Heterogeneous Polymer System Using Chemical Modification and Atomic Force Microscopy.
  ACS Polymer Preprints, Vol. 41, No. 2, 1423-1424, 2000.
  Raghavan, D.; Gu, X.; VanLandingham, M. R.; Nguyen, T.
• Mapping Drying Shrinkage Deformations in Cement-Based Materials.
  Cement and Concrete Research, Vol. 27, No. 10, 1603-1612, 1997.
  Neubauer, C. M.; Jennings, H. M.; Garboczi, E. J.
• Mapping Heterogeneity in Polymeric Materials Using Atomic Force Microscopy: Phase Imaging and Nanoindentation.
  Polymeric Materials: Science and Engineering (PMSE). Spring Meeting. Volume 82. Proceedings. American Chemical Society (ASME). March 26-30, 2000, San Francisco, CA, American Chemical Society, Washington, DC, 50-51 pp, 2000.
  Gu, X.; VanLandingham, M. R.; Raghavan, D.; Nguyen, T.
• Mapping Polymer Heterogeneity Using Atomic Force Microscopy Phase Imaging and Nanoscale Indentation.
  Macromolecules, Vol. 33, No. 7, 2573-2583, 2000.
  Raghavan, D.; Gu, X.; Nguyen, T.; VanLandingham, M. R.; Karim, A.
• Materials Aspects of Fiber-Reinforced Polymer Composites in Infrastructure.
  NISTIR 5888; 46 p. August 1996.
  Chin, J. W.
• Materials-Science Based Approach to Phenol Emissions From a Flooring Material in an Office Building.
  Indoor Air Quality and Climate, 7th International Conference. Proceedings. Indoor Air '96. Volume 2. July 21-26, 1996, Nagoya, Japan, 109-114 pp, 1996.
  Martin, J. W.; Persily, A. K.; Guenther, F. R.; Nguyen, T.; Liggett, W. S., Jr.; Byrd, W. E.; Oakley, L.
• Mathematical Analysis of Moisture and Heat Transfer in the Roof Cavities of Manufactured Housing.
  Challenges of the 21st Century. Roofing Technology, Fourth (4th) International Symposium. Proceedings. First (1st) Edition. U.S. National Institute of Standards and Technology, U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, 390-400 pp, 1997.
  Burch, D. M.; Walton, G. N.; Tsongas, G. A.
• Mathematical Analysis of Practices to Control Moisture in the Roof Cavities of Manufactured Houses.
  NISTIR 5880; 60 p. September 1996.
  Burch, D. M.; Tsongas, G. A.; Walton, G. N.
• Maturity Method: From Theory to Application.
  Structures Congress and Exposition 2001. Proceedings. American Society of Civil Engineers. May 21-23, 2001, Washington, DC, Chang, P. C., Editor(s), 1-19 pp, 2001.
  Carino, N. J.; Lew, H. S.
• Mean-Field-Scaling in Lattice Boltzmann Fluid Mixtures.
  ASCE Engineering Mechanics Division Conference, 13th Proceedings. American Society of Civil Engineers (ASCE). June 13-16, 1999, Baltimore, MD, 1-6 pp, 1999.
  Martys, N. S.; Douglas, J. F.
• Mean Recurrence Intervals of Ultimate Wind Loads.
  OMAE98-1218;Offshore Mechanics and Arctic Enginering (OMAE), 17th International Conference. Proceedings. American Society of Mechanical Engineers. OMAE98-1218. July 1998, 1-6 pp, 1998.
  Simiu, E.; Heckert, N. A.; Whalen, T. M.
• Measured Performance of a 35 Kilowatt Roof Top Photovoltaic System.
  International Solar Energy Conference. ISEC2003. ASME International. Proceedings. March 15-18, 2003, Hawaii, 2003.
  Fanney, A. H.; Henderson, K. R.; Weise, E. R.
• Measured Performance of Building Integrated Photovoltaic Panels.
  ASME Journal of Solar Energy Engineering, Special Issue: Solar Thermochemical Processing, Vol. 123, No. 2, 187-193, August 2001.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Measured Performance of Building Integrated Photovoltaic Panels. Round 2.
  Journal of Solar Energy Engineering (Transactions of the ASME), Vol. 127, 314-323, August 2005.
  Dougherty, B. P.; Fanney, A. H.; Davis, M. W.
• Measured Versus Predicted Performance of Building Integrated Photovoltaics.
  Journal of Solar Energy Engineering (Transactions of the ASME), Vol. 125, No. 1, 21-32, February 2003.
  Davis, M. W.; Fanney, A. H.; Dougherty, B. P.
• Measurement and Determination of Radon Source Potential: A Literature Review.
  NISTIR 5399; 196 p. April 1994.
  Tanner, A. B.
• Measurement and Prediction of Pore Pressure in Cement Mortar Subjected to Elevated Temperature.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B8. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 125-148 pp, 1997.
  Consolazio, G. R.; McVay, M. C.; Rish, J. W., III
• Measurement and Simulation of the IAQ Impact of Particle Air Cleaners in a Single-Zone Building.
  NISTIR 6461; 43 p. February 2000.
  Emmerich, S. J.; Nabinger, S. J.
• Measurement and Simulation of the Indoor Air Quality Impact of Gaseous Air Cleaners in a Test House.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 652-657 pp, 2002.
  Howard-Reed, C.; Nabinger, S. J.; Emmerich, S. J.
• Measurement and Simulation of the Indoor Air Quality Impact of Gaseous Air Cleaners in a Test House.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 652-657 pp, 2002.
  Howard-Reed, C.; Nabinger, S. J.; Emmerich, S. J.
• Measurement Approaches to Develop a Fundamental Understanding of Scratch and Mar Resistance.
  Federation of Societies for Coatings Technology (FSCT) Technical Program Annual Meeting, 81st. November 12-14, 2003, Philadelphia, PA, Federation of Societies for Coatings Technology, Blue Bell, PA, 2003.
  VanLandingham, M. R.; Chang, N, K.; Wu, T. Y.; Chang, S. H.; Sung, L. P.; Jardret, V. D.
• Measurement Approaches to Develop a Fundamental Understanding of Scratch and Mar Resistance.
  Journal of Coatings Technology Research, Vol. 1, No. 4, 257-266, 2004.
  VanLandingham, M. R.; Sung, L. P.; Chang, N. K.; Wu, T. Y.; Chang, S. H.; Jardret, V. D.
• Measurement of Internal Strain in Cast-Concrete Structures.
  Experimental Mechanics, Vol. 23, No. 4, 361-369, December 1983.
  Stone, W. C.
• Measurement of Particle Size Distribution in Portland Cement Powder: Analysis of ASTM Round Robin Studies.
  Cement, Concrete and Aggregates, Vol. 26, No. 2, 1-11, 2004.
  Ferraris, C. F.; Hackley, V. A.; Aviles, A. I.
• Measurement of Rheological Properties of High Performance Concrete: State of the Art Report.
  Journal of Research of the National Institute of Standards and Technology, Vol. 104, No. 5, 461-478, September/October 1999.
  Ferraris, C. F.
• Measurement of Rheological Properties of High Performance Concrete: State of the Art Report.
  NISTIR 5869; 39 p. July 1996.
  Ferraris, C. F.
• Measurement of the Heat Capacities of Pure and Mixed Refrigerants.
  Thermophysical Properties, 10th Symposium. Proceedings. June 20-23, 1988, Gaithersburg, MD, 1988.
  Radermacher, R.
• Measurement of the Rheological Properties of Cement Paste: A New Approach.
  Role of Admixtures in High Performance Concrete, RILEM International Symposium. Proceedings. Sponsored by Cementos Mexicanos, S.A. (CEMEX). March 21-26, 1999, Monterrey, Mexico, RILEM Publications S.A.R.L., Cabrera, J. G.; Rivera-Villarreal, R. R., Editor(s)(s), 333-342 pp, 1999.
  Ferraris, C. F.
• Measurement of Water Transport from Saturated Pumice Aggregates to Hardening Cement Paste.
  Advances in Cement and Concrete. Proceedings. Engineering Conferences International. August 10-14, 2003, Copper Mountain, CO, 89-99 pp, 2003.
  Lura, P.; Bentz, D. P.; Lange, D. A.; Kovler, K.; Bentur, A.; vanBreugel, K.
• Measurement of Workability of Fresh Concrete Using a Mixing Truck.
  Journal of Research of the National Institute of Standards and Technology, Vol. 110, No. 1, 55-66, January/February 2005.
  Amziane, S.; Ferraris, C. F.; Koehler, E. P.
• Measurements and Predictions of Light Scattering by Clear Coatings.
  Applied Optics, Vol. 40, No. 13, 2159-2168, May 1, 2001.
  McKnight, M. E.; Vorburger, T. V.; Marx, E.; Nadal, M. E.; Barnes, P. V.; Galler, M. A.
• Measurements of Indoor Pollutant Emissions From EPA Phase II Wood Stoves.
  NISTIR 5575; 65 p. February 1995.
  Nabinger, S. J.; Persily, A. K.; Sharpless, K. S.; Wise, S. A.
• Measurements of Outdoor Air Distribution in an Office Building.
  NISTIR 5320; 54 p. June 1994.
  Dols, W. S.; Persily, A. K.
• Measurement Techniques for Horizontal Flow Boling Heat Transfer With Pure and Mixed Refrigerants.
  Experimental Heat Transfer, Vol. 2, 237-255, 1989.
  Jung, D. S.; McLinden, M.; Radermacher, R.
• Measuring Peel Adhesion of Coatings.
  Journal of Protective Coatings and Linings, Vol. 12, No. 5, 82-89, May 1995.
  McKnight, M. E.; Seiler, J. F., Jr.; Nguyen, T.; Rossiter, W. J., Jr.
• Measuring Tg in Ultra-Thin Polymer Films With an Excimer Fluorescence Technique.
  Polymer Engineering and Science, Vol. 41, No. 9, 1497-1505, September 2001.
  White, C. C.; Migler, K. B.; Wu, W. L.
• Measuring the Impacts of the Delivery System on Project Performance: Design-Build and Design-Bid-Build.
  NIST GCR 02-840; 105 p. November 2002.
  Thomas, S. R.; Macken, C. L.; Chung, T. H.; Kim, I.
• Mechanical Properties of Blends of HDPE and Recycled Urea-Formaldehyde Resin.
  Journal of Applied Polymer Science, Vol. 77, No. 14, 3220-3227, 2000.
  Bliznakov, E. D.; White, C. C.; Shaw, M. T.
• Mechanical Properties of Blends of HDPE and Recycled Urea-Formaldehyde Resin.
  Journal of Applied Polymer Science, Vol. 77, No. 14, 3220-3227, 2000.
  Bliznakov, E. D.; White, C. C.; Shaw, M. T.
• Mechanical Properties of High Performance Concrete After Exposure to Elevated Temperatures.
  NISTIR 6475; 39 p. March 2000.
  Lawson, J. R.; Phan, L. T.; Davis, F. L.
• Mechanical Properties of High-Strength Concrete at Elevated Temperatures.
  NISTIR 6726; 102 p. March 2001.
  Phan, L. T.; Carino, N. J.
• Mechanical Properties of Siliceous HSC Subjected to High-Temperature Cycles.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B9. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 149-153 pp, 1997.
  Felicetti, R.; Gambarova, P. G.
• Mechanisms of Degradation of Portland Cement-Based Systems by Sulfate Attack.
  Chapter 22;Mechanisms of Chemical Degradation of Cement-Based Systems. Proceedings of the Materials Research Society's Symposium on Mechanisms of Chemical Degradation of Cement-Based Systems. November 27-30, 1995, Boston, MA, E & FN Spon, London, England, Scrivener, K. L.; Young, J. F., Editor(s)(s), 185-192 pp, 1997.
  Ferraris, C. F.; Clifton, J. R.; Stutzman, P. E.; Garboczi, E. J.
• Melnikov-Based Open-Loop Control of Escape for a Class of Nonlinear Systems.
  American Society of Mechanical Engineers. Design Engineering Technical Conferences. Proceedings. DE-Vol. 84-1. Book No. H1000A. 1995, Cudney, H. H.; Sinha, S. C.; Cusumano, J. P.; Pfeiffer, F., Editor(s)(s), 897-902 pp, 1995.Journal of Dynamic Systems, Measurement, and Control, Vol. 119, 590-594, September 1997.
  Simiu, E.; Franaszek, M.
• Melnikov-Based Open-Loop Control of Escape for a Class of Nonlinear Systems.
  American Society of Mechanical Engineers. Design Engineering Technical Conferences. Proceedings. DE-Vol. 84-1. Book No. H1000A. 1995, Cudney, H. H.; Sinha, S. C.; Cusumano, J. P.; Pfeiffer, F., Editor(s)(s), 897-902 pp, 1995.Journal of Dynamic Systems, Measurement, and Control, Vol. 119, 590-594, September 1997.
  Simiu, E.; Franaszek, M.
• Melnikov Necessary Condition for Noise-Induced Escapes.
  International Association for Civil Engineering Reliability and Risk Analysis (CERRA). International Conference on ICASP, 7th Proceedings. Applications of Statistics and Probability. Civil Engineering Reliability and Risk Analysis. July 10-13, 1995, Paris, France, A.A. Balkema, Rotterdam, Lemaire, M.; Favre, J. L.; Mebarki, A., Editor(s)(s), 1137-1142 pp, 1995.
  Simiu, E.; Frey, M. R.; Hagwood, C.
• Melnikov Necessary Condition for Noise-Induced Escapes.
  International Association for Civil Engineering Reliability and Risk Analysis (CERRA). International Conference on ICASP, 7th Proceedings. Applications of Statistics and Probability. Civil Engineering Reliability and Risk Analysis. July 10-13, 1995, Paris, France, A.A. Balkema, Rotterdam, Lemaire, M.; Favre, J. L.; Mebarki, A., Editor(s)(s), 1137-1142 pp, 1995.
  Simiu, E.; Frey, M. R.; Hagwood, C.
• Melnikov Processes and Noise-Induced Escapes: Applications to Engineering, Physics, and Biology.
  Stochastically Excited Nonlinear Ocean Structures. Chapter 7, World Scientific, NJ, Shlesinger, M. F.; Swean, T., Editor(s)(s), 187-212 pp, 1998.
  Franaszek, M.; Frey, M. R.; Simiu, E.
• Melnikov Processes and Noise-Induced Exits From a Well.
  Paper 9809;Journal of Engineering Mechanics, Vol. 122, No. 3, 263-270, March 1996.
  Simiu, E.; Frey, M. R. R.
• Melnikov Process for Stochastically Perturbed, Slowly Varying Oscillators: Application to a Model of Wind-Driven Coastal Currents.
  Journal of Applied Mechanics, Vol. 63, 429-435, June 1996.
  Simiu, E.
• MEMS Application in Pavement Condition Monitoring: Challenges.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 387-392 pp, 2002.
  Attoh-Okine, N. O.; Menash, S.
• MEMS Sensors for HVAC&R: Small, Fast, Cheap.
  ASHRAE Journal, 69-74, May 2004.
  Yashar, D. A.; Domanski, P. A.
• MEMS Transducer for Ultrasonic Flaw Detection.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 375-380 pp, 2002.
  Jain, A.; Greve, D. W.; Oppenheim, I. J.
• Meteorological Extremes.
  Encyclopedia of Environmetrics. Volume 3. 2002, John Wiley and Sons, Ltd., Chichester, UK, El-Shaarawi, A. H.; Piegorsch, W. W., Editor(s)(s), 1255-1259 pp, 2002.
  Simiu, E.
• Method for Estimating the Energy Efficiency Ratio of Mixed System Air Conditioners and Heat Pumps.
  NISTIR 6045; 35 p. September 1997.
  Domanski, P. A.; Kim, B. S.
• Method for Measuring Water Diffusion in a Coating Applied to a Substrate.
  Journal of Coatings Technology, Vol. 67, No. 844, 37-46, 1995.
  Nguyen, T.; Bentz, D. P.; Byrd, W. E.
• Method of Estimating the Parameters of Tuned Mass Dampers for Seismic Applications.
  NISTIR 5806; 39 p. April 1996.Earthquake Engineering and Structural Dynamics, Vol. 26, 617-635, 1997.
  Sadek, F.; Mohraz, B.; Taylor, A. W.; Chung, R. M.
• Method of Estimating the Parameters of Tuned Mass Dampers for Seismic Applications.
  NISTIR 5806; 39 p. April 1996.Earthquake Engineering and Structural Dynamics, Vol. 26, 617-635, 1997.
  Sadek, F.; Mohraz, B.; Taylor, A. W.; Chung, R. M.
• Method of Estimating the Parameters of Tuned Mass Dampers for Seismic Applications.
  NISTIR 5806; 39 p. April 1996.Earthquake Engineering and Structural Dynamics, Vol. 26, 617-635, 1997.
  Sadek, F.; Mohraz, B.; Taylor, A. W.; Chung, R. M.
• Method of Test for Tracer Gas Test of an Outdoor Furnace Designed for Installation Without a Flue Pipe.
  NISTIR 6257; 20 p. November 1998.
  Liu, S. T.; Kelly, G. E.
• Methodologies for Predicting the Service Lives of Coating Systems.
  NIST BSS 172; Federation Series; 34 p. October 1994.
  Martin, J. W.; Saunders, S. C.; Floyd, F. L.; Wineburg, J. P.
• Methodologies for Predicting the Service Lives of Coating Systems.
  NIST BSS 172; Federation Series; 34 p. October 1994.
  Martin, J. W.; Saunders, S. C.; Floyd, F. L.; Wineburg, J. P.
• Methodology for Development of Design Criteria for Joint Hurricane Wind Speed and Storm Surge Events: Proof of Concept.
  NIST TN 1482; NIST Technical Note 1482; 53 p. April 2007.
  Phan, L. T.; Simiu, E.; McInerney, M. A.; Taylor, A. A.; Glahn, B.; Powell, M. D.
• Method to Assess the Suitability of a Climate for Natural Ventilation of Commercial Buildings.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 2. June 30-July 5, 2002, Monterey, CA, 854-859 pp, 2002.
  Axley, J. W.; Emmerich, S. J.
• Metrology for Characterizing Sratch Resistance of Polymer Coatings.
  Annual Meeting, 82nd. Federation of Societies for Coatings Technology Meeting Technical Program. Federation of Societies for Coatings Technology (FSCT) Meeting. Proceedings. October 27-29, 2004, Chicago, IL, Federation of Societies for Coatings Technology, Blue Bell, PA, 2004.
  Sung, L. P.; Drzal, P. L.; VanLandingham, M. R.; Wu, T. Y.
• Microfabricated Flow Controller for Refrigerant Expansion.
  Journal of Microelectromechanical Systems, Vol. 16, No. 5, 1106-1112, October 2007.
  Yashar, D.; Domanski, P. A.; DeVoe, D. L.
• Micro Level Analysis of the Relationship Between Changes in Equipment Technology and Wages in the U.S. Construction Industry.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 281-286 pp, 2002.
  Goodrum, P. M.; Gangwar, M.
• Microstructural Modelling of Self-Desiccation During Hydration.
  TVBM-3074;Self-Desiccation and Its Importance in Concrete Technology. Proceedings. International Research Seminar. June 10, 1997, Lund, Sweden, 132-140 pp, 1997.
  Bentz, D. P.; Snyder, K. A.; Stutzman, P. E.
• Microstructure and Morphology of Amine-Cured Epoxy Coatings and Their Changes With Outdoor Exposures: An AFM Study.
  Journal of Coatings Technology Research, Vol. 1, No. 3, 2004.
  Gu, X.; Nguyen, T.; Ho, D. L.; Oudina, M.; Martin, D.; Kidah, B.; Jamin, J.; Rezig, A.; Sung, L. P.; Byrd, E.; Martin, J. W.; Jean, Y. C.
• Microstructure and Transport Properties of Concrete.
  RILEM. Performance Criteria for Concrete Durability. Proceedings. State of the Art Report prepared by RILEM Technical Committee TC 116-PCD, Performance of Concrete as a Criterion of Its Durability. RILEM Report 12. Chapter 8. 1995, E & FN SPON, London,England, Kropp, J.; Hilsdorf, H. K., Editor(s)(s), 198-212 pp, 1995.
  Garboczi, E. J.
• Microstructure and Transport Properties of Porous Building Materials. Part 2. Three-Dimensional X-Ray Tomographic Studies.
  Materials and Structures, Vol. 33, No. 227, 147-153, April 2000.
  Bentz, D. P.; Quenard, D. A.; Kunzel, H. M.; Baruchel, J.; Peyrin, F.; Martys, N. S.; Garboczi, E. J.
• Microstructure and Transport Properties of Porous Building Materials.
  Materials and Structures, Vol. 31, 317-324, June 1998.
  Quenard, D. A.; Xu, K.; Kunzel, H. M.; Bentz, D. P.; Martys, N. S.
• Microstructure of Portland Cement-Based Materials: Computer Simulation and Percolation Theory.
  Computational and Mathematical Models of Microstructural Evolution. Materials Research Society Symposium Proceedings. Volume 529. April 13-17, 1998, San Francisco, CA, Materials Research Society, Pittsburgh, PA, 89-100 pp, 1998.
  Garboczi, E. J.; Bentz, D. P.
• Microstructure Property Relationships in Concrete: From Nanometers to Centimeters.
  Second (2nd) Canmet/ACI. Advances in Concrete Technology. International Symposium. Supplementary Papers. 1995, Las Vegas, NV, Malhotra, V. M., Editor(s), 573-585 pp, 1995.
  Garboczi, E. J.; Bentz, D. P.
• Minimizing Throttline Losses in the Refrigeration Cycle.
  International Congress of Refrigeration, 19th Proceedings. Volume IVb. Theme 4. IIR Commission B2. August 1995, Hague, The Netherlands, 766-773 pp, 1995.
  Domanski, P. A.
• Minimizing Throttline Losses in the Refrigeration Cycle.
  International Congress of Refrigeration, 19th Proceedings. Volume IVb. Theme 4. IIR Commission B2. August 1995, Hague, The Netherlands, 766-773 pp, 1995.
  Domanski, P. A.
• Mitigating Autogeneous Shrinkage by Internal Curing.
  Special Publication 218;High-Performance Structural Lightweight Concrete. American Concrete Institute Special Publication 218. Proceedings. 2004, Ries, J. P.; Holm, T. A., Editor(s)(s), 143-148 pp, 2004.
  Geiker, M. R.; Bentz, D. P.; Jensen, O. M.
• Mitigation Strategies for Autogenous Shrinkage Cracking.
  Cement and Concrete Research, Vol. 26, No. 6, 677-685, August 2004.
  Bentz, D. P.; Jensen, O. M.
• Mixed Reality Benefits for Design Perception.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 191-196 pp, 2002.
  Dunston, P. S.; Wang, X.; Billinghurst, M.; Hampson, B.
• Mixture Proportioning for Internal Curing.
  Concrete International, Vol. 27, No. 2, 35-40, February 2005.
  Bentz, D. P.; Lura, P.; Roberts, J. W.
• Mobile 3D Visualization for Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 53-58 pp, 2002.
  Lipman, R. R.
• Mobile 3D Visualization for Steel Structures.
  Automation in Construction, Vol. 13, No. 1, 119-125, January 2004.
  Lipman, R. R.
• Mobile Robot Pose Tracking for Performance Analysis.
  Performance Metrics for Intelligent Systems PerMIS 2002. August 13-15, 2002, Gaithersburg, MD, 2002.
  Lytle, A. M.; Saidi, K. S.; Stone, W. C.; Shneier, M.
• Mobile Sensor Platform for Construction Metrology and Automation: Design and Initial Results.
  Robotic Applications for the Next Millenium. Field and Service Robotics International Conference. FSR'99. Proceedings. August 29-31, 1999, Pittsburgh, PA, 310-315 pp, 1999.
  Pfeffer, L. E.
• Model for a Quantitative Corrosion Damage Function for a Reinforced Concrete Marine Substructure.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.2. November 9-10, 1998, 4-6 pp, 1999.
  Sagues, A.
• Model for Automated Road-Construction Control.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 425-429 pp, 2002.
  Navon, R.; Shpatnitsky, Y.; Goldschmidt, E.
• Modeling Drying Shrinkage in Reconstructed Porous Materials: Application to Porous Vycor Glass.
  Modelling and Simulation in Materials Science and Engineering, Vol. 6, 211-236, 1998.
  Bentz, D. P.; Garboczi, E. J.; Quenard, D. A.
• Modeling Drying Shrinkage of Cement Paste and Mortar. Part 1. Structural Models From Nanometres to Millimetres.
  Materials and Structures, Vol. 28, 450-458, 1995.
  Bentz, D. P.; Quenard, D. A.; Baroghel-Bounty, V.; Garboczi, E. J.; Jennings, H. M.
• Modeling Ion and Fluid Transport in Unsaturated Cement Systems in Isothermal Conditions.
  Cement and Concrete Research, Vol. 45, No. 1, 141-153, January 2005.
  Samson, E.; Marchand, J.; Snyder, K. A.; Beaudoin, J. J.
• Modeling Ion Transport in Cement-Based Materials.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.6. November 9-10, 1998, 11-12 pp, 1999.
  Marchand, J.; Samson, E.; Maltais, Y.
• Modeling Moisture in Residential Buildings with a Multizone IAQ Program.
  Indoor Air 2002, 9th International Conference on Indoor Air Quality and Climate. Proceedings. Volume 4. June 30-July 5, 2002, Monterey, CA, 328-333 pp, 2002.
  Emmerich, S. J.; Persily, A. K.; Nabinger, S. J.
• Modeling Study of Ventilation, IAQ and Energy Impacts of Residential Mechanical Ventilation.
  NISTIR 6162; 85 p. May 1998.
  Persily, A. K.
• Modeling Study of Ventilation in Manufactured Houses.
  NISTIR 6455; 87 p. February 2000.
  Persily, A. K.; Martin, S. R.
• Modeling the Elastic Properties of Concrete Composites: Experiment, Differential Effective Medium Theory and Numerical Simulation.
  Cement and Concrete Composites, Vol. 29, No. 1, 22-38, January 2007.
  Sun, Z.; Garboczi, E. J.; Shah, S. P.
• Modeling the Influence of the Interfacial Zone on the DC Electrical Conductivity of Mortar.
  Advanced Cement Based Materials, Vol. 2, 169-181, 1995.
  Garboczi, E. J.; Schwartz, L. M.; Bentz, D. P.
• Modeling the Microstructure and Elastic Properties of Complex Materials.
  MSM 2000 International Conference on Modeling and Simulation of Microsystems. Proceedings. Applied Computational Research Society. March 27-29, 2000, San Diego, CA, 27-29 pp, 2000.
  Roberts, A. P.; Garboczi, E. J.
• Modeling the Microstructure and Elastic Properties of Complex Materials.
  MSM 2000 International Conference on Modeling and Simulation of Microsystems. Proceedings. Applied Computational Research Society. March 27-29, 2000, San Diego, CA, 27-29 pp, 2000.
  Roberts, A. P.; Garboczi, E. J.
• Modeling the Performance of a Naturally Ventilated Commercial Building With a Multizone Coupled Thermal/Airflow Simulation Tool.
  HI-02021-4;ASHRAE Transactions 2002 Annual Meeting. Proceedings. 2002, Honolulu, HI, 1-16 pp, 2002.ASHRAE Transactions, Vol. 108, No. 2,
  Axley, J.; Emmerich, S. J.; Walton, G. N.
• Model Investigation of the Influence of Particle Shape on Portland Cement Hydration.
  Cement and Concrete Research, Vol. 36, No. 6, 1007-1015, June 2006.
  Bullard, J. W.; Garboczi, E. J.
• Modelling Cement Microstructure: Pixels, Particles, and Property Prediction.
  Materials and Structures, Vol. 32, 187-195, April 1999.
  Bentz, D. P.
• Modelling Chloride Ingress by the Combined Processes of Diffusion and Convection.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.5. November 9-10, 1998, 9-11 pp, 1999.
  Thomas, M.; Bentz, E.
• Modelling of the Microstructure and Transport Properties of Concrete.
  Construction and Building Materials, Vol. 10, No. 5, 293-300, 1996.
  Garboczi, E. J.; Bentz, D. P.
• Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD on November 9-10, 1998.
  NISTIR 6327; 55 p. May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. November 9-10, 1998, 55 pp, 1999.
  Frohnsdorff, G. J. C.
• Modelling the D.C. Electrical Conductivity of Mortar.
  Materials Research Society. Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials. Materials Research Society Symposium Proceedings Volume 370. November 28-December 1, 1994, Boston, MA., Materials Research Society, Pittsburgh, PA, Diamond, S.; Mindess, S.; Glasser, F. P.; Roberts, L. W., Editor(s)(s), 429-436 pp, 1995.
  Garboczi, E. J.; Schwartz, L. M.; Bentz, D. P.
• Model Performance Standard for Guardrails. Final Report.
  NBSIR 76-1131; 30 p. July 1976.
  Fattal, S. G.; Cattaneo, L. E.; Turner, G. E.; Robinson, S. N.
• Modes and Mechanisms of Degradation of Epoxy-Coated Reinforcing Steel in a Marine Environment.
  Durability of Building Materials and Components 7th. Volume 1. Chapter 51. 1996, E&FN Spon, London, England, Sjostrom, C., Editor(s), 491-502 pp, 1996.
  Nguyen, T.; Martin, J. W.
• Modified Optimal Algorithm for Active Structural Control.
  NISTIR 5782; 29 p. January 1996.
  Sadek, F.; Mohraz, B.
• Modified Slump Test to Measure Rheological Parameters of Fresh Concrete.
  Cement,Concrete, and Aggregates, Vol. 20, No. 2, 241-247, December 1998.
  Ferraris, C. F.; deLarrard, F.
• MOIST: A PC Program for Predicting Heat and Moisture Transfer in Building Envelopes. Version 3.0.
  NIST SP 917; 47 p. September 1997.
  Burch, D. M.; Chi, J.
• Moisture Sensor Technology: A Summary of Techniques for Measuring Moisture Levels in Building Envelopes.
  ASHRAE transactions, Vol. 109, No. 1, 232-242, February 2003.
  Healy, W. M.
• Monitoring Construction Equipment for Automated Project Performance Control.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 161-166 pp, 2002.
  Sacks, R.; Navon, R.; Shapira, A.; Brodetsky, I.
• Monitoring of the Boring Trajectory in Underground Channel.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 519-522 pp, 2002.
  Bock, T.; Bulgakow, A.; Krapivin, D.; Aleksyuk, S.; Pritchin, S.
• Motion Planning Taking Into Account the Dynamic Model of Vehicles: Application to the Compactor.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 223-228 pp, 2002.
  Lemaire, C. E.; Vandanjon, P. O.; Gautier, M.; Peyret, F.
• Multiattribute Decision Analysis Method for Evaluating Buildings and Building Systems.
  NISTIR 5663; 86 p. September 1995.
  Norris, G. A.; Marshall, H. E.
• Multiscale Analytical/Numerical Theory of the Diffusivity of Concrete.
  Advanced Cement Based Materials, Vol. 8, 77-88, 1998.
  Garboczi, E. J.; Bentz, D. P.
• Multi-Scale Digital-Image-Based Modelling of Cement-Based Materials.
  Materials Research Society. Microstructure of Cement-Based Systems/Bonding and Interfaces in Cementitious Materials Symposia. Materials Research Society Symposium Proceedings Volume 370. November 28-December 1, 1994, Boston, MA, Materials Research Society, Pittsburgh, PA, Diamond, S.; Mindess, S.; Glasser, F. P.; Roberts, L. W., Editor(s)(s), 33-41 pp, 1995.
  Bentz, D. P.; Garboczi, E. J.; Jennings, H. M.; Quenard, D. A.
• Multi-Scale Microstructural Modeling of Concrete Diffusivity: Identification of Significant Variables.
  Cement, Concrete, and Aggregates, Vol. 20, No. 1, 129-139, June 1998.
  Bentz, D. P.; Garboczi, E. J.; Lagergren, E. S.
• Multi-Scale Microstructural Modeling to Predict Chloride Ion Diffusivity for High Performance Concrete.
  Materials Science of Concrete Special Volume: Ion and Mass Transport in Cement-Based Materials. Proceedings. American Ceramic Society. October 4-5, 1999, Toronto, Canada, 253-267 pp, 2001.
  Bentz, D. P.; Garboczi, E. J.
• Multiscale Modeling of Fluid Transport in Heterogeneous Materials Using Discrete Boltzmann Methods.
  Materials and Structures, Vol. 35, 650-659, December 2002.
  Martys, N. S.; Hagedorn, J. G.
• Multi-Scale Picture of Concrete and Its Transport Properties: Introduction for Non-Cement Researchers.
  NISTIR 5900; 52 p. October 1996.
  Garboczi, E. J.; Bentz, D. P.
• Multi-Sensory Approach to 3-D Mapping of Underground Utilities.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 525-530 pp, 2002.
  Bernold, L. E.; Venkatesan, L.; Suvarna, S.
• Multizone Modeling Approaches to Contaminant-Based Design.
  HI-02-9-1;ASHRAE Transactions 2002 Annual Meeting. Proceedings. 2002, Honolulu, HI, 1-8 pp, 2002.ASHRAE Transactions, Vol. 108, No. 2,
  Musser, A.; Persily, A. K.
• Multizone Modeling as an Indoor Air Quality Design Tool.
  Health Buildings 2000, 6th International Conference. Proceedings. Volume 2. Design and Operation of HVAC Systems. August 6-10, 2000, Espoo, Finland, 455-460 pp, 2000.
  Musser, A.
• Multizone Modeling of Three Residential Indoor Air Quality Control Options.
  NISTIR 5801; 142 p. March 1996.
  Emmerich, S. J.; Persily, A. K.
• Multizone Modeling of Three Residential Indoor Air Quality Control Options.
  IBPSA. Building Simulation '95. 4th International Conference. Proceedings. 1995, 213-220 pp, 1995.
  Emmerich, S. J.; Persily, A. K.
• Myths About Building Envelopes.
  ASHRAE Journal, Vol. 41, No. 3, 39-47, March 1999.
  Persily, A. K.

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X