Building Titles

D

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X

• Damage and Failure Modes of Structural Steel Components. Appendices A-G. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-3C; 258 p. September 2005.
  Banovic, S. W.; Foecke, T.
• Damage and Failure Modes of Structural Steel Components. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-3C; 336 p. September 2005.
  Banovic, S. W.; Foecke, T.
• Damper Control System for Preventing Reverse Airflow Through the Exhaust Air Damper of Variable-Air-Volume Air-Handling Units.
  HVAC&R Research, Vol. 6, No. 2, 135-148, April 2000.
  Seem, J. E.; House, J. M.; Kelly, G. E.; Klaassen, C. J.
• Database-Assisted Design and Wind Directionality Effects.
  Bluff Body Aerodynamics and Applications, 4th International Colloquium. Volume of Abstracts. Proceedings. Organized by Ruhr-University Bochum. September 11-14, 2000, 213-216 pp, 2000.
  Rigato, A.; Chang, P. C.; Simiu, E.
• Database-Assisted Design, Standardization, and Wind Direction Effects.
  Journal of Structural Engineering, Vol. 127, No. 8, 853-860, August 2001.
  Rigato, A.; Chang, P.; Simiu, E.
• Database Synchronization Technology for Multi-Project Schedule Coordination.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 109-116 pp, 2002.
  Choo, H. J.; Tommelein, I. D.
• Database Tools for Modeling Emissions and Control of Air Pollutants From Consumer Products, Cooking, and Combustion.
  NISTIR 7364; 69 p. November 2006.
  Howard-Reed, C.; Polidoro, B.
• Data Exchange Standards for Construction Automation.
  NISTIR 5856; May 1996.National Institute of Standards and Technology. NIST Construction Automation Program, Report No. 2. NIST Construction Automation Workshop. Proceedings. Chapter One: Topical Lectures. Paper 1.6. March 20-31, 1995, 43-49 pp, 1995.
  Reed, K. A.
• Data Interpretation From Leuze Rotoscan Sensor for Robot Localisation and Environment Mapping.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 343-348 pp, 2002.
  Seward, D. W.; Quayle, S. D.; Zied, K.; Pace, C.
• De Bolder: An Unusual Example of Off-Site Construction.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 143-148 pp, 2002.
  Maas, G.; vanEekelen, B.
• December 2003 Public Update on the Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST SP 1000-4; 36 p. December 2003.
  Shyam-Sunder, S.
• December 9, 2002, Progress Report on the NIST Building and Fire Investigation Into the World Trade Center Disaster.
  NISTIR 6942; NIST SP 1000-2; 17 p. December 2002.
  Shyam-Sunder, S.
• De Facto Microzonation Through the Use of Soils Factors in Design Triggers.
  International Conference on Seismic Zonation, 5th. Proceedings. October 17-19, 1995, Nice, France, Quest Editions, France, 510-517 pp, 1995.
  Todd, D. R.; Harris, J. R.
• Degradation of Powder Epoxy Coated Panels Immersed in a Saturated Calcium Hydroxide Solution Containing Sodium Chloride. Final Report. August 1992-July 1994.
  FHWA-RD-94-174; 44 p. October 1995.
  Martin, J. W.; Nguyen, T.; Alsheh, D.; Lechner, J. A.; Embree, E. J.; Byrd, W. E.; Seiler, J. F., Jr.
• Degraded Aqueous Glycoil Solutions: pH Values and the Effects of Common Ions on Suppression pH Decreases.
  Solar Energy Materials, Vol. 12, No. 1, 77-86, 1985.
  Clifton, J. R.; Rossiter, W. J., Jr.; Brown, P. W.
• De la Pate de Ciment au Beton: Modlisation et Mesures Exprimentales des Proprietes Rhologiques. [Cement Paste to the Concrete Modisation and Measure Experimental of the Properties Rheology.]
  36e Colloque Annuel du Groupe Franais de Rhologie; Rhologie, Genie Civil et Environment. Proceedings. October 10-12, 2001, Marne l Vallee, 226-230 pp, 2001.
  Ferraris, C. F.; Martys, N. S.
• Delineation of Densified Sand at Treasure Island by SASW Testing.
  Geotechnical Site Characterization. Site Characterization - ISC'98, 1st International Conference. Volume 1. April 19-22, 1998, Atlanta, GA, A.A. Balkema, Rotterdam, Netherlands, Robertson, P. K.; Mayne, P. W., Editor(s)(s), 459-464 pp, 1998.
  Andrus, R. D.; Chung, R. M.; Stokoe, K. H., II; Bay, J. A.
• Dense Strong Motion Instrument Array in Sendai.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 484-491 pp, 1998.
  Okawa, I.; Kashima, T.; Koyama, S.
• DEPAF: A Computer Model for Design and Performance Analysis of Furnaces.
  ASME 77-HT-11;AIChE-ASME Heat Transfer Conference. American Society of Mechanical Engineers. August 15-17, 1977, Salt Lake City, UT, 1977.
  Chi, J.
• Department of Energy Air-Conditioner/Heat Pump Test Procedure Update.
  Heat Pumps in Cold Climates, Third (3rd) International Conference. Proceedings. Caneta Research, Inc. August 11-12, 1997, Nova Scotia, Canada, Caneta Research, Inc., Ontario, Canada, 493-508 pp, 1997.
  Dougherty, B. P.
• Dependence of the Glass Transition Temperature of Polymer Films on Interfacial Energy and Thickness.
  Macromolecules, Vol. 34, No. 16, 5624-5634, 2001.
  Fryer, D. S.; Peters, R. D.; Kim, E. J.; Tomaszewski, J. E.; dePablo, J. J.; Nealey, P. F.; White, C. C.; Wu, W.
• Deposition of Oil Spilled From a Russian Tanker on Coasts.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 492-501 pp, 1998.
  Kato, F.; Sato, S.
• Deposition Rates of Fine and Coarse Particles in Residential Buildings: Literature Review and Measurements in an Occupied Townhouse.
  NISTIR 7068; 29 p. October 2003.
  Howard-Reed, C.; Wallace, L.; Emmerich, S. J.
• Design and Construction of Structural Systems. Appendices A-G. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1A; 386 p. September 2005.
  Fanella, D. A.; Derecho, A. T.; Ghosh, S. K.
• Design and Construction of Structural Systems. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1A; 159 p. September 2005.
  Fanella, D. A.; Derecho, A. T.; Ghosh, S. K.
• Design and Machining of Copper Specimens With Micro Holes for Accurate Heat Transfer Measurements.
  Experimental Heat Transfer, Vol. 6, 329-344, 1993.
  Kedzierski, M. A.; Worthington, J. L., III
• Design Concepts for a New Guarded Hot Plate Apparatus for Use Over an Extended Temperature Range.
  Insulation Materials: Testing and Applications, 4th Volume. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 98-115 pp, 2002.
  Flynn, D. R.; Zarr, R. R.; Hahn, M. H.; Healy, W. M.
• Design Considerations for the Use of Fiber Reinforced Polymeric Composites in the Rehabilitation of Concrete Structures.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/59-72 pp, 1999.
  Karbhari, V. M.; Seible, F.
• Design Guidelines for the Seismic Modification of Welded Steel Moment Frame Buildings.
  NIST SP 931; PB98-150238; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 201-210 pp, 1998.
  Gross, J. L.
• Design Gust Wind Speeds in the United States.
  Journal of Structural Engineering, 1077-1080, September 1999.
  Simiu, E.; Filliben, J. J.
• Design, Measurements and Performance Predictions for a Micromolded Refrigerant Expansion Device.
  NISTIR 7327; 137 p. April 2006.
  Yashar, D. A.
• Design of a Steady-State Detector for Fault Detection and Diagnosis of a Residential Air Conditioner.
  International Journal of Refrigeration, Vol. 31, No. 5, 790-799, August 2008.
  Kim, M.; Yoon, S. H.; Domanski, P. A.; Payne, W. V.
• Design of Extended Range EVA PLSS Systems: Lessons From Terrestrial Exploration Missions.
  Space Manufacturing, 12th Conference. Proceedings. Space Studies Institute. May 8-11, 1997, Princeton, NJ, 1997.
  Stone, W. C.
• Detailed Computer Analysis of the Moisture Performance of Roof Constructions in the U.S. DOE Moisture Control Handbook.
  Challenges of the 21st Century. Roofing Technology, 4th International Symposium. Proceedings. First (1st) Edition. U.S. National Roofing Contractors Association, Canadian Roofing Contractors Association, National Research Council of Canada, International Waterproofing Association, CIB, RILEM. September 17-19, 1997, Gaithersburg, MD, National Roofing Contractors Association, Rosemont, IL, 401-416 pp, 1997.
  Tsongas, G. A.; Thornton, B. A.; Burch, D. M.; Walton, G. N.
• Detection of Moisture Accumulation in Wall Assemblies Using Ultra-Wideband Radio Signals.
  Performance of Exterior Envelopes of Whole Buildings. International Conference, 9th. Proceedings December 5-10, 2004, Clearwater Beach, FL, 2004.
  Healy, W. M.; vanDoorn, E.
• Deterioration of Iowa Highway Concrete Pavements: A Petrographic Study.
  NISTIR 6399; 84 p. December 1999.
  Stutzman, P. E.
• Determination of Acidic Degradation Products in Aqueous Ethylene Glycol and Propylnene Glycol Solutions Using Ion Chromatography.
  Solar Energy Materials, Vol. 9, 267-279, 1983.
  Rossiter, W. J., Jr.; Brown, P. W.; Godette, M.
• Determination of the Ultimate Capacity of Elastomeric Bearings Under Axial Loading.
  NISTIR 6121; 150 p. February 1998.
  Bradley, G. L.; Chang, P. C.; Taylor, A. W.
• Determining the Uncertainty of X-Ray Absorption Measurements.
  Journal of Research of the National Institute of Standards and Technolgoy, Vol. 109, No. 5, 479-496, September/October 2004.
  Wojcik, G. S.
• Devastating Network in Miura Peninsula Japan.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 344-349 pp, 1998.
  Watabe, M.; Hirokawa, S.
• Developing a Construction Integrated Management System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 27-33 pp, 2002.
  Shiau, Y. C.; Wang, M. T.; Tsai, T. P.; Wang, W. C.
• Developing Application Protocols (APs) Using the Architecture and Methods of STEP (STandard for the Exchange of Product data). Fundamentals of the STEP Methodology.
  NISTIR 5972; 77 p. January 1997.
  Danner, W. F.
• Developmental Computer-Based Version of ASCE 7-95 Standard Provisions for Wind Loads.
  NIST TN 1415; 55 p. November 1995.
  Schechter, M. M.; Schechter, E.; Simiu, E.
• Development and Application of an Indoor Air Quality Commissioning Program in a New Office Building.
  American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Engineering Indoor Environments. IAQ'94 Conference. October 30-November 2, 1994, St. Louis, MO, 23-33 pp, 1994.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Development and Application of an Indoor Air Quality Commissioning Program in a New Office Building.
  American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Engineering Indoor Environments. IAQ'94 Conference. October 30-November 2, 1994, St. Louis, MO, 23-33 pp, 1994.
  Dols, W. S.; Persily, A. K.; Nabinger, S. J.
• Development and Application of a Quality System Standard for Construction Materials Testing Laboratories.
  American Society for Testing and Materials. Laboratory Operation and Accreditation, 3rd Symposium. Proceedings. December 9, 1993, Dallas/Fort Worth Airport, TX, 1993.Journal of Testing and Evaluation, Vol. 24, No. 1, 49-55, January 1996.
  Spellerberg, P. A.; Trimm, W. L.; Pielert, J. H.
• Development and Application of Automated Delivery System for Finishing Building Materials.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 235-240 pp, 2002.
  Atsuhiro, D.; Koji, H.; Tomoya, K.; Takashi, S.
• Development and Demonstration of a Method to Evaluate Bio-Sampling Strategies Using Building Simulation and Sample Planning Software.
  NIST TN 1636; NIST Technical Note 1636; 55 p. June 2009.
  Dols, W. S.; Matzke, B. D.; Sego, L. H.; Morrow, J. B.; Nuffer, L. L.; Pulsipher, B. A.; Persily, A. K.
• Development and Operation of Large Centrifuge at PWRI.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 158-166 pp, 1998.
  Matsuo, O.; Tsutsumi, T.; Okamura, M.; Sasaki, T.; Nishi, K.
• Development of a Method for Measuring Water-Stripping Resistance of Asphalt/Siliceous Aggregate Mixtures.
  NISTIR 5865; 49 p. July 1996.
  Nguyen, T.; Byrd, W. E.; Bentz, D. P.; Seiler, J. F., Jr.
• Development of an Analysis of Structural Steel Fracture and Development of Technical Solutions.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 196-200 pp, 1998.
  Yamanouchi, H.; Mukai, A.; Hasegawa, T.
• Development of an Information Model to Enhance Integration and Coordination in the Construction Projects.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 123-128 pp, 2002.
  Caballero, A. A.; Ahmed, S. M.; Azhar, S.; Barcala, M.
• Development of an Integrated Cost Estimation and Cost Control System for Construction Projects.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 129-134 pp, 2002.
  Azhar, S.; Ahmed, S. M.; Caballero, A. A.
• Development of a NIST Standard Reference Database for Thermal Conductivity of Building Materials.
  Thermal Conductivity 25/Thermal Expansion 13. Proceedings. June 13-16, 1999, Technomic Publishing Co., Inc., 2000.
  Zarr, R. R.; Dalton, G. R.; Fioravante, S. M.
• Development of an Optical Fiber-Based Moisture Sensor for Building Envelopes.
  Document AIC-PROC-24-2--3;Ventilation, Humidity Control and Energy Proceedings. Air Infiltration and Ventilation Centre (AIVC) Conference and Building Environment and Thermal Envelope Council (BETEC) Conference, 24th. Proceedings. (International Energy Agency (IEA) Energy Conservation in Buildings and Community Systems Program. Annex V: Air Infiltration and Ventilation Centre.) October 14, 2003, Washington, DC, 277-282 pp, 2003.
  Healy, W. M.; Luo, S.; Evans, M.; Sucheta, A.; Liu, Y.
• Development of a Robotic Structural Steel Placement System.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 263-268 pp, 2002.
  Lytle, A. M.; Saidi, K. S.; Stone, W. C.
• Development of a Test Method for Leaching of Lead From Lead-Based Paints Through Encapsulants.
  NISTIR 5783; 39 p. February 1996.
  Nguyen, T.; McKnight, M. E.; Byrd, W. E.
• Development of Electronic Acquisition Model for Project Scheduling (e-AMPS) Using Java-XML.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 41-46 pp, 2002.
  Lin, W. Y.
• Development of IAQ Model Input Databases: Volatile Organic Compound Source Emission Rates.
  Development of IAQ Model Input Databases: Volatile Organic Compound Source Emission Rates. Air and Waste Management Association Conference. Proceedings. July 21-23, 2003, Research Triangle Park, NC, 1-14 pp, 2003.
  Howard-Reed, C.; Polidoro, B.; Dols, W. S.
• Development of New High Bridge Piers Containing Spiral Reinforcement.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 459-474 pp, 1998.
  Michio, O.; Jiro, F.; Takuya, A.; Moriyuki, O.; Yasuyuki, K.
• Development of Performance-Based Building Code in Japan: Framework of Seismic and Structural Provisions.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 260-271 pp, 1998.
  Hiraishi, H.; Midorikawa, M.; Teshigawara, M.; Gojo, W.
• Development of Procedures to Enhance the Performance of Rehabilitated URM Buildings.
  NIST GCR 97-724-1; 101 p. August 1997.
  Lizundia, B.; Holmes, W. T.; Longstreth, M.; Kren, A.; Abrams, D. P.
• Development of Test Guidelines for Passive Energy Dissipation Devices.
  ISSD 0386-5878;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting, 31st. Technical Memorandum of PWRI 3653. Proceedings. May 11-14, 1999, Tsukuba, Japan, 461-468 pp, 1999.
  Riley, M. A.; Sadek, F.
• Development of the Disaster Information System (DIS/Earthquakes).
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 286-299 pp, 1998.
  Okayama, K.; Kiriyama, T.; Yabuuchi, S.
• Development of the Reference Model for a Residential Heat Pump System for Cooling Mode Fault Detection and Diagnosis.
  International Journal of Refrigeration,
  Kim, M.; Yoon, S. H.; Payne, W. V.; Domanski, P. A.
• Development of Thermal Insulation Standard Reference Materials Using "Good" Experimental Design.
  Thermal Conductivity, 24th and Thermal Expansion, 12th Joint Conferences. Proceedings. October 26-29, 1997, Pittsburgh, PA, Technomic Publishing Co., Inc., Lancaster, PA, Gaal, P. S.; Apostolescu, D. E.; Hurst, E. P., Editor(s)(s), 662-672 pp, 1999.
  Zarr, R. R.; Lagergren, E. S.
• Development of Thermal Insulation Standard Reference Materials Using "Good" Experimental Design.
  Thermal Conductivity, 24th and Thermal Expansion, 12th Joint Conferences. Proceedings. October 26-29, 1997, Pittsburgh, PA, Technomic Publishing Co., Inc., Lancaster, PA, Gaal, P. S.; Apostolescu, D. E.; Hurst, E. P., Editor(s)(s), 662-672 pp, 1999.
  Zarr, R. R.; Lagergren, E. S.
• Developments in the Application of the Performance Concept in Building.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 1. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Institute, Haifa, Israel, Becker, R.; Paciuk, M., Editor(s)(s), 1/1-11 pp, 1996.
  Gross, J. G.
• Developments in the Application of the Performance Concept in Building.
  Applications of the Performance Concept in Building. CIB-ASTM-ISO-RILEM 3rd International Symposium. Volume 1. Proceedings. National Building Research Institute. December 9-12, 1996, Tel-Aviv, Israel, National Building Research Institute, Haifa, Israel, Becker, R.; Paciuk, M., Editor(s)(s), 1/1-11 pp, 1996.
  Gross, J. G.
• Dielectric Properties and Morphology of Ferroelectric Ceramic-Polymer Composite Films.
  Microelectronics and Microsystem Packaging. Materials Research Society Symposium. Volume 682E. Proceedings. 2001, Boudreaux, J. D.; Dauskardt, R. H.; Last, H. T.; McCluskey, F. P., Editor(s)(s), N6.9.1-6 pp, 2001.
  Chiang, C. K.; Popielarz, R.; Sung, L. P.
• Diesel Adsorption to PVC and Iron During Contaminated Water Flow and Flushing Tests.
  NISTIR 7520; 52 p. June 2008.
  Kedzierski, M. A.
• Diffusion in Partially-Saturated Porous Materials.
  Materials and Structures, Vol. 32, 555-562, October 1999.
  Martys, N. S.
• Diffusivity-Porosity Relation for Cement Paste.
  Materials Science of Concrete: Sulfate Attack Mechanisms, Special Volume. Proceedings. October 5-6, 1998, Quebec, Canada, American Ceramic Society, Westerville, OH, 259-264 pp, 1999.
  Garboczi, E. J.; Bentz, D. P.
• Digital Archival of Construction Project Information.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 59-64 pp, 2002.
  Latimer, D. T.; Hendrickson, C.
• Digital-Image-Based Computer Modeling and Visualization of Cement-Based Materials.
  Emerging Technologies in Geotechnical Engineering. Transportation Research Record No. 1526. Soils, Geology, and Foundations. Proceedings. Transportation Research Board. Proceedings. January 1996, National Academy Press, Washington, DC, 129-134 pp, 1996.
  Bentz, D. P.; Garboczi, E. J.
• Digital Images and Computer Modeling.
  Experimental Methods in the Physical Sciences. Volume 35. Methods in the Physics of Porous Media. Chapter 1, Academic Press, San Diego, CA, 1-41 p., 1999.
  Garboczi, E. J.; Bentz, D. P.; Martys, N. S.
• Dimensional Analysis of Ionic Transport Problems in Hydrated Cement Systems. Part 1. Theoretical Considerations.
  Cement and Concrete Research, Vol. 30, No. 12, 1955-1960, December 2000.
  Barbarulo, R.; Marchand, J.; Snyder, K. A.; Prene, S.
• Dimensional Crossover in the Phase Separation Kinetics of Thin Polymer Blend Films.
  Physical Review Letters, Vol. 76, No. 23, 4368-4371, June 3, 1996.
  Sung, L. P.; Karim, A.; Douglas, J. F.; Han, C. C.
• Direct Measurement of Plowing Friction and Wear of a Polymer Thin Film Using the Atomic Force Microscope.
  Journal of Materials Research, Vol. 16, No. 5, 1487-1492, 2001.
  Du, B.; VanLandingham, M. R.; Zhang, Q.; He, T.
• Discomfort Due to Wind Near Buildings: Aerodynamic Concepts. Final Report. Building Research Translation.
  NBS TN 710-9; March 1978.
  Gandemer, J.
• Discussion of "The Use of the Flow Length Concept to Assess the Efficiency of Air Entrainment With Regards to Frost Durability: Part 1. Description of the Test Method" by R. Pleau and M. Pigeon.
  Cement, Concrete, and Aggregates, Vol. 19, No. 2, 116-119, December 1997.
  Snyder, K. A.
• Distributed Architecture for Standards Processing.
  Computing in Civil and Building Engineering, 6th International Conference. Proceedings. July 12-15, 1995, Berlin, Germany, 1995.
  Kiliccote, H.; Garrett, J. H., Jr.; Choi, B.; Reed, K. A.
• Distribution of Earthquake Input Energy in Structures.
  NISTIR 6903; 80 p. January 2003.
  Khashaee, P.; Mohraz, B.; Sadek, F.; Lew, H. S.; Gross, J. L.
• Doubling the Service Life of Concrete Structures. 1: Reducing Ion Mobility Using Nanoscale Viscosity Modifiers.
  Cement and Concrete Composites, Vol. 30, No. 8, 674-678, September 2008.
  Bentz, D. P.; Snyder, K. A.; Cass, L. C.; Peltz, M. A.
• Draft Design Guidelines for Concrete Beams Externally Strengthened With FRP.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/113-120 pp, 1999.
  GangaRao, V. S.; Vijay, P. V.
• Draft Guidelines for Evaluating Liquefaction Resistance Using Shear Wave Velocity Measurements and Simplified Procedures.
  NISTIR 6277; 134 p. March 1999.
  Andrus, R. D.; Stokoe, K. H., II; Chung, R. M.
• Draft Guidelines for Quality Control Testing of Elastomeric Seismic Isolation Systems.
  NISTIR 5345; 33 p. February 1994.
  Shenton, H. W., III
• Draft Manual for Seismic Isolation Design of Underground Structures.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 211-223 pp, 1998.
  Unjoh, S.; Hoshikuma, J.; Nagaya, K.; Murai, K.
• Drying/Hydration in Cement Pastes During Curing.
  Materials and Structures, Vol. 34, No. 243, 557-565, November 2001.
  Bentz, D. P.; Hansen, K. K.; Madsen, H. D.; Vallee, F.; Griesel, E. J.
• Ductile Cladding Connection Systems for Seismic Design.
  NIST GCR 98-758; 177 p. October 1998.
  Goodno, B. J.; Craig, J. I.; Dogan, T.; Towashiraporn, P.
• Durability Gap Analysis for Fiber-Reinforced Polymer Composites in Civil Infrastructure.
  Journal of Composites for Construction, Vol. 73, 238-247, August 2003.
  Karbhari, V. M.; Chin, J. W.; Hunston, D.; Benmokrane, B.; Juska, T.; Morgan, R.; Lesko, J. J.; Sorathia, U.; Reynaud, D.
• Duramodel for the Design of Cost-Effective Concrete Structures.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.7. November 9-10, 1998, 12-14 pp, 1999.
  Tourney, P.
• Dynamic Change Management for Fast-Tracking Construction Projects.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 81-89 pp, 2002.
  Park, M.
• Dynamic Characteristics of Five Buildings During Strong and Low-Amplitude Motions.
  International Journal of the Structural Design of Tall Buildings, Vol. 2, 1-15, 1993.
  Celebi, M.; Phan, L. T.; Marshall, R. D.

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X