Building Titles

C

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X

• C30 Self-Assemblied Monolayers on Silica, Titania, and Zirconia: HPLC Performance, Atomic Force Microscopy, Ellipsometry, and NMR Studies of Molecular Dynamcis and Uniformity of Coverage.
  Journal of the American Chemical Society, Vol. 122, No. 29, 6997-7011, 2000.
  Pursch, M.; Vanderhart, D. L.; Sander, L. C.; Gu, X.; Nguyen, T.; Wise, S. A.; Gajewski, D. A.
• Calculation of Ionic Diffusion Coefficients on the Basis of Migration Test Results.
  Materials and Structures, Vol. 36, No. 257, 156-165, April 2003.
  Samson, E.; Marchand, J.; Snyder, K. A.
• Calculation of Obstructed View Factors by Adaptive Integration.
  NISTIR 6925; 22 p. November 2002.
  Walton, G. N.
• Calibration Experiments of a Laser Scanner.
  NISTIR 6922; 121 p. September 2002.
  Cheok, G. S.; Leigh, S.; Rukhin, A.
• Calibration of a Calorimeter for Thermal Resistance Measurements of Advanced Insulation Panels.
  HVAC&R Research, Vol. 6, No. 3, 1-12, July 2000.
  Ellis, M. W.; Fanney, A. H.; Davis, M. W.
• Calibration of Thin Heat Flux Sensors for Building Applications Using ASTM C 1130.
  Journal of Testing and Evaluation, Vol. 29, No. 3, 293-300, May 2001.
  Zarr, R. R.; Martinez-Fuentes, V.; Filliben, J. J.; Dougherty, B. P.
• Calorimetric and Visual Measurements of R123 Pool Boiling on Four Enhanced Surfaces.
  NISTIR 5732; 59 p. November 1995.
  Kedzierski, M. A.
• Caltrans Specifications. Appendix 3.1B.
  NISTIR 6288; February 1999.NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings. January 7-8, 1998, Tucson, AZ, Duthinh, D., Editor(s), 3/39-58 pp, 1999.
  Caltrans
• Capillary Porosity Depercolation/Repercolation in Hydrating Cement Pastes Via Low-Temperature Calorimetry Measurements and CEMHYD3D Modeling.
  Journal of The American Ceramic Society, Vol. 89, No. 8, 2606-2611, August 2006.
  Bentz, D. P.
• Capillary Transport in Mortars and Concrete.
  Cement and Concrete Research, Vol. 27, No. 5, 747-760, 1997.
  Martys, N. S.; Ferraris, C. F.
• Capital Facilities Information Handover Guide. Part 1.
  NISTIR 7259; 91 p. January 2006.
  Fallon, K. K.; Palmer, M. E.
• Capitalizing on Early Project Opportunities to Improve Facility Life-Cycle Performance.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 73-78 pp, 2002.
  Kam, C.; Fischer, M.; Hanninen, R.; Lehto, S.; Laitinen, J.
• Carbon Monoxide Dispersion in Residential Buildings: Literature Review and Technical Analysis.
  NISTIR 5906; 74 p. October 1996.
  Persily, A. K.
• Case Study: Using the Wearable Computer in the Construction Industry.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 551-556 pp, 2002.
  Fuller, S.; Ding, Z.; Sattineni, A.
• Cation Diffusion at the Polymer Coating/Metal Interface.
  Journal of Adhesion Science Technology, Vol. 9, No. 7, 935-951, 1995.
  Pommersheim, J. M.; Nguyen, T.; Zhang, Z.; Lin, C.
• Causes of the Apparent Heat Transfer Degradation for Refrigerant Mixtures.
  HTD-Vol. 197;American Society of Mechanical Engineers. Two-Phase Flow and Heat Tranfers, 1992. National Heat Transfer Conference, 28th. HTD-Vol. 197. August 9-12, 1992, San Diego, CA, ASME, New York, Kim, J. H.; Nelson, R. A.; Hashemi, A., Editor(s)(s), 149-158 pp, 1992.
  Kedzierski, M. A.; Kim, J. H.; Didion, D. A.
• Cement and Concrete Standards of the Future. Report From the Workshop on Cement and Concrete Standards of the Future October 11-12, 1995.
  NISTIR 5933; 54 p. April 1997.
  Frohnsdorff, G. J. C.; Clifton, J. R.
• Cement Hydration: Building Bridges and Dams at the Microstructure Level.
  Advanced Cement-Based Materials: Research and Teaching. Knud Hojgaard Conference. Proceedings. June 12-15, 2005, Lyngby, Denmark, Jensen, O. M.; Geiker, M.; Stang, H., Editor(s)(s), 135-146 pp, 2005.
  Bentz, D. P.
• Cement Hydration: Building Bridges and Dams at the Microstructure Level.
  Advanced Cement-Based Materials: Research and Teaching. Knud Hojgaard Conference. Proceedings. June 12-15, 2005, Lyngby, Denmark, Jensen, O. M.; Geiker, M.; Stang, H., Editor(s)(s), 135-146 pp, 2005.
  Bentz, D. P.
• Cement Hydration in the Presence of Municipal Solid Waste Incineration Fly Ash.
  Material Science and Concrete Properties, 1st International Meeting. Proceedings. March 5-6, 1998, Toulouse, France, 63-70 pp, 1998.
  Remond, S.; Bentz, D. P.; Pimienta, P.; Bournazel, J. P.
• CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modelling Package. Version 2.0.
  NISTIR 6485; 241 p. April 2000.
  Bentz, D. P.
• Challenges in Developing Environmentally Safe Heat Pumping Systems.
  ZSITS International Thermal Science Seminar, American Society of Mechanical Engineers (ASME) Proceedings. June 11-13, 2000, Bled, Slovenia, 1-10 pp, 2000.
  Didion, D. A.; Brown, J. S.
• Chaotic Behavior of Coastal Currents Due to Random Wind Forcing.
  94CH3472-8;Oceanic Engineering Society of the Institute of Electrical and Electronics Engineers, Inc. by the Societe des Electriciens et Electroniciens de France, and by la Communaute Urbaine de Brest. OCEANS 94. Oceans Engineering for Today's Technology and Tomorrow' Preservation. Proceedings. Volume 3. 1994, III/11-16 pp, 1994.
  Simiu, E.
• Chaotic Resonnce: Hopping Rates, Spectra and Signal-to-Noise Ratios.
  Stochastic and Chaotic Dynamics in the Lakes: STOCHAOS. CP502, American Institute of Physics, Broomhead, D. S.; Luchinskaya, E. A.; McClintock, P. V. E.; Mullin, T., Editor(s)(s), 428-433 pp, 2000.
  Kovaleva, A.; Simiu, E.
• Chaotic Transitions in Deterministic and Stochastic Dynamical Systems: Application of Melnikov Processes in Engineering, Physics, and Neuroscience.
  Structural Dynamics, 5th European Conference. EURODYN2002. Proceedings. Septemer 2-5, 2002, Munich, Germany, 179-183 pp, 2002.
  Simiu, E.
• Characterization of Chemical Heterogeneity in Polymer Systems Using Hydrolysis and Tapping-Mode Atomic Force Microscopy.
  Journal of Polymer Science: Part B, Polymer Physics, Vol. 39, No. 13, 1460-1470, 2001.
  Raghavan, D.; Gu, X.; Nguyen, T.; VanLandingham, M. R.
• Characterization of Coating Microstructure Using Laser Scanning Confocal Microscopy.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, 343-344 pp, 2000.
  Sung, L. P.; Nadal, M. E.; Stutzman, P. E.; McKnight, M. E.
• Characterization of Coating Microstructure Using Laser Scanning Confocal Microscopy.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, 343-344 pp, 2000.
  Sung, L. P.; Nadal, M. E.; Stutzman, P. E.; McKnight, M. E.
• Characterization of Coating System Interphases With Phase Imaging AFM.
  Adhesion Society Annual Meeting, 24th. Proceedings. February 2001, Williamsburg, VA, Adhesion Society, Blacksburg, VA, Emerson, J. A., Editor(s), 68-70 pp, 2001.
  Nguyen, T.; Gu, X.; VanLandingham, M. R.; Giraud, M.; Dutruc-Rosset, R.; Ryntz, R.; Nguyen, D.
• Characterization of Heterogeneous Regions in Polymer Systems Using Tapping Mode and Force Mode Atomic Force Microscopy.
  Langmuir, Vol. 16, No. 24, 9448-9459, 2000.
  Raghavan, D.; VanLandingham, M. R.; Gu, X.; Nguyen, T.
• Characterization of Metal-Oxide Nanoparticles: Synthesis and Dispersion in Polymeric Coatings.
  Nanomaterials for Structural Applications. Materials Research Society (MRS) Symposium I. Proceedings. Volume 740. 2003, Materials Research Society, Berndt, C.; Fischer, T. E.; Ovidko, I.; Skandan, G., Editor(s)(s), I5.4.1-I5.4.6 pp, 2003.
  Sung, L. P.; Scierka, S.; Baghai-Anaraki, M.; Ho, D. L.
• Characterization of Polyester Degradation Using Tapping Mode Atomic Force Microscopy.
  Polymeric Materials: Science and Engineering (PMSE) Fall Meeting. Volume 83. Proceedings. American Chemical Society (ACS) Division of Polymeric Materials: Science and Engineering. August 20-24, 2000, Washington, DC, American Chemical Society, Washington, DC, 336-337 pp, 2000.
  Gu, X.; Raghavan, D.; Nguyen, T.; VanLandingham, M. R.
• Characterization of Potential Thermal Degradation Products From the Reactions of Aqueous Ethylene Glycol and Propylene Glycol Solutions With Copper Metal.
  Solar Energy Materials, Vol. 16, No. 4, 309-313, 1987.
  Brown, P. W.; Gaulk, K. G.; Rossiter, W. J., Jr.
• Characterization of Potential Thermal Degradation Products From the Reactions of Aqueous Ethylene Glycol and Propylene Glycol Solutions With Copper Metal.
  Solar Energy Materials, Vol. 16, No. 4, 309-313, 1987.
  Brown, P. W.; Gaulk, K. G.; Rossiter, W. J., Jr.
• Characterizing the Appearance and Its Related Microstructure of Metallic-Flaked Coatings.
  Coatings for Plastics Symposium, 3rd International Conference. Proceedings. June 5-7, 2000, Troy, MI, Business News Publishing Co., Troy, MI, 1-6 pp, 2000.
  Sung, L. P.; Nadal, M. E.; McKnight, M. E.
• Chemistry and Structure of Hydration Products. Chapter 2.
  Cement Research Progress. Chapter 2, American Ceramic Society, Westerville, OH, 37-69 p., 1999.
  Stutzman, P. E.
• Chloride Exposed RC-Structures: Chloride Ingress and Lifetime Prediction by the Hetek Model.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.4. November 9-10, 1998, 8-9 pp, 1999.
  Poulsen, E.
• Civil Infrastructure Systems Research: Government Perspective.
  Technical Report MCEER-98-0017;U.S./Japan Joint Seminar on Civil Infrastructure Systems Research. Proceedings. August 28-30, 1997, Honolulu, HI, Multidisciplinary Center for Earthquake Engineeing Research,, Shinozuka, M.; Rose, A., Editor(s)(s), 243-248 pp, 1997.
  Wright, R. N.
• Classical Kinetic Theory Approach to Lattice Boltzmann Simulation.
  International Journal of Modern Physics C, Vol. 12, No. 8, 1169-1178, October 2001.
  Martys, N. S.
• Classification Techniques for Fault Detection and Diagnosis of an Air-Handling Unit.
  CH-99-18-5;ASHRAE Transactions, Vol. 105, No. 1, 1987-1997, 1999.
  House, J. M.; Lee, W. Y.; Shin, D. R.
• Coating Industry Knowledge Base Systems.
  Steel Structures Painting Council (SSPC). Technologies for a Diverse Industry. SSPC 1996 Seminars. Proceedings. SSPC 96-08. November 17-21, 1996, Charlotte, NC, 144-149 pp, 1996.
  Boocock, S. K.; Kaetzel, L. J.
• Code Provisions for High Strength Concrete Strength-Temperature Relationships at Elevated Temperatures.
  Materials and Structures, Vol. 36, No. 256, 91-98, March 2003.
  Phan, L. T.; Carino, N. J.
• Codification of Wind Loads on Buildings Using Bluff Body Aerodynamics and Climatological Data Bases.
  Journal of Wind Engineering and Industrial Aerodynamics, Vol. 69-71, 497-506, 1997.
  Simiu, E.; Stathopoulos, T.
• Collaborative Fire Protection Engineering Based on Software Agents.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 3-8 pp, 2002.
  Rueppel, U.
• Combination of Transient Plane Source and Slug Calorimeter Measurements to Estimate the Thermal Properties of Fire Resistive Materials.
  Journal of Testing and Evaluation, Vol. 3532, No. 3, May 2007.
  Bentz, D. P.
• Comparable Performance Evaluation of HC and HFC Refrigerants in an Optimized System.
  IIR Gustav Lorentzen Conference on Natural Working Fluids, 7th. Proceedings. May 28-31, 2006, Tondheim, Norway, 2006.
  Domanski, P. A.; Yashar, D.
• Comparative Inter-Laboratory Study of Wind Loading on Low Industrial Buildings.
  Technical Memorandum of PWRI 4075;Wind and Seismic Effects. U.S./Japan Natural Resources Development Program (UJNR). Joint Meeting, 39th. Technical Memorandum of PWRI 4075. Proceedings. May 14-16, 2007, Tsukuba, Japan, 409-417 pp, 2007.
  Bienkiewicz, B.; Endo, M.; Main, J. A.; Fritz, W. P.
• Comparative Performance of Two Postal Service Vehicles Operated on Gasoline, Compressed Natural Gas and Propane.
  Winter Annual Meeting, 1974. American Society of Mechanical Engineers (ASME). November 17-22, 1974, New York, NY, 1974.
  Hill, J. E.; Didion, D. A.
• Comparison Between the Affected Populations of Indirect Health Effects After the 1995 Great Hanshin-Awaji Earthquake.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 224-233 pp, 1998.
  Ogawa, K.; Tsuji, I.; Hisamichi, S.; Shiono, K.
• Comparison of an R22 and an R410A Air Conditioner Operating at High Ambient Temperatures.
  R2-1;International Refrigeration and Air Conditioning Conference. Proceedings. July 16-19, 2002, West Lafayette, IN, 2002.
  Payne, W. V.; Domanski, P. A.
• Comparison of Building Code Structural Requirements. Federal Building and Fire Safety Investigation of the World Trade Center.
  NIST NCSTAR 1-1B; 264 p. September 2005.
  Ghosh, S. K.; Liang, X.
• Comparison of Concrete Rheometers.
  Concrete International, Vol. 25, No. 8, 41-47, August 2003.
  Brower, L. E.; Ferraris, C. F.
• Comparison of Concrete Rheometers: International Tests at LCPC (Nantes, France) in October 2000.
  NISTIR 6819; 156 p. September 2001.
  Ferraris, C. F.; Brower, L. E.; Banfill, P.; Beaupre, D.; Chapdelaine, F.; deLarrard, F.; Domone, P.; Nachbaur, L.; Sedran, T.; Wallevik, O.; Vallevik, J. E.
• Comparison of Concrete Rheometers: International Tests at MB (Cleveland, OH, USA) in May 2003.
  NISTIR 7154; 47 p. September 2004.
  Ferraris, C. F.; Brower, L. E.; Beaupre, D.; Chapdelaine, F.; Domone, P.; Koehler, E. P.; Shen, L.; Sonebi, M.; Struble, L.; Tepke, D.; Wallevik, O.; Wallevik, J. E.
• Comparison of Experimental Measurements of Local Flow Boiling Heat Transfer Coefficients for R11 and R123.
  ASME/JSME Thermal Engineering Proceedings. Vol. 3. 1991, 243-250 pp, 1991.
  Kedzierski, M. A.; Didion, D. A.
• Comparison of Measured and Predicted Tracer Gas Concentrations in a Townhouse.
  NISTIR 7035; 42 p. August 2003.
  Emmerich, S. J.; Nabinger, S. J.; Gupte, A.; Howard-Reed, C.; Wallace, L. A.
• Comparison of Photovoltaic Module Performance Measurements.
  Journal of Solar Energy Engineering (Transactions of the ASME), Vol. 128, No. 2, 152-159, May 2006.
  Fanney, A. H.; Davis, M. W.; Dougherty, B. P.; King, D. L.; Boyson, W. E.; Kratochvil, J. A.
• Comparison of Predicted to Measured Module Performance.
  ES2007-36028; Session: 11-2 Solar Power Testing;Energy Sustainability (ES2007). Session: 11-2 Solar Power Testing. Proceedings. June 27-30, 2007, Long Beach, CA, 1-15 pp, 2007.
  Fanney, A. H.; Dougherty, B. P.; Davis, M. W.
• Comparison of R245fa Pool Boiling Measurements to R123, and R245fa/Isopentane on a Passively Enhanced, Horizontal Surface.
  International Journal of Transport Phenomena, Vol. 8, No. 4, 331-344, 2006.
  Kedzierski, M. A.
• Comparison of Rating Water-Source Heat Pumps Using ARI Standard 320 and ISO Standard 13256-1.
  NISTIR 6803; 44 p. September 2001.
  Payne, W. V.; Domanski, P. A.
• Comparison of the Seismic Provisions of Model Building Codes and Standards to the 1991 NEHRP Recommended Provisions.
  NIST GCR 95-674; 92 p. May 1995.
  Melvyn Green and Associates, Inc.
• Comparison of the Seismic Provisions of Model Building Codes and Standards to the 1994 NEHRP Recommended Provisions.
  NIST GCR 98-755; ICSSC TR-20; 188 p. August 1998.
  Degenkolb Engineers
• Comparitive Analysis of an Automative Air Conditioning Systems Operating With CO2 and R134a.
  International Journal of Refirgeration, Vol. 25, No. 1, 19-32, 2002.
  Brown, J. S.; Yana-Motta, S. F.; Domanski, P. A.
• Completing Our Panel's Work.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 13-19 pp, 1998.
  Wright, R. N.
• Compositional Analysis of Beneficiated Fly Ashes.
  NISITR 5598; 23 p. May 1995.
  Stutzman, P. E.; Centeno, R. L.
• Compositional Analysis of NIST Reference Material Clinker 8486.
  Accuracy in Powder Diffraction III. Proceedings. Poster #2. April 22-25, 2001, Gaithersburg, MD, 2001 AND Cement Microscopy, 22nd International Conference. Proceedings. April 29-May 4, 2000, Montreal, Canada, 22-38 pp, 2000, 2001.
  Stutzman, P. E.; Leigh, S. D.
• Compositional Analysis of NIST Reference Material Clinker 8486.
  Accuracy in Powder Diffraction III. Proceedings. Poster #2. April 22-25, 2001, Gaithersburg, MD, 2001 AND Cement Microscopy, 22nd International Conference. Proceedings. April 29-May 4, 2000, Montreal, Canada, 22-38 pp, 2000, 2001.
  Stutzman, P. E.; Leigh, S. D.
• Computational Materials Science on the Internet.
  Concrete International, 26-27, December 1997.
  Garboczi, E. J.; Bentz, D. P.
• Computation of Linear Elastic Properties from Microtomographic Images: Methodology and Match to Theory and Experiment.
  Journal of Geophysics, Vol. 67, No. 5, 1396-1405, September/October 2002.
  Arns, C. H.; Knackstedt, M. A.; Pinczewski, W. V; Garboczi, E. J.
• Computation of the Linear Elastic Properties of Random Porous Materials With a Wide Variety of Microstructure.
  Mathematical, Physical and Engineering Sciences Royal Society of London, Series A. Vol. 458, No. 2021. Proceedings. 2002, 1033-1054 pp, 2002.
  Roberts, A. P.; Garboczi, E. J.
• Computer Analysis of the Moisture Performance of Roof Constructions in the U.S. DOE Moisture Control Handbook.
  NISTIR 5919; 56 p. December 1996.
  Tsongas, G. A.; Thornton, B. A.; Burch, D. M.; Walton, G. N.
• Computer Analysis of Wall Constructions in the Moisture Control Handbook.
  NISTIR 5627; 70 p. May 1995.
  Burch, D. M.; Saunders, C. A.
• Computer-Based Monitoring for Decision Support Systems and Disaster Preparedness in Buildings.
  International Multi-Conference on Engineering and Technological Innovation (IMETI 2008). Proceedings. Communications Systems, Technologies and Applications II (CCCT). June 29-July 2, 2008, Orlando, FL, 1-6 pp, 2008.
  Vinh, A.
• Computer Integrated Knowledge System (CIKS) for Construction Materials, Components, and Systems: Proposed Framework.
  NISTIR 6071; 50 p. September 1997.
  Kurihara, T. Y.; Kaetzel, L. J.
• Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop.
  NISTIR 6401; 102 p. December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 1999.
  Kaetzel, L. J.
• Computer Integrated Knowledge Systems: Proposed Framework.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 58-63 pp, 1999.
  Kurihara, T. Y.
• Computerized Integrated Knowledge Based System for High-Performance Concrete: An Overview.
  NISTIR 5947; 43 p. February 1997.
  Clifton, J. R.; Bentz, D. P.; Kaetzel, L. J.
• Computerized Integrated Knowledge Base System for High-Performance Concrete: An Overview.
  Challenges for Concrete in the Next Millennium, 13th FIP Congress Proceedings. Volume 1. May 23-29, 1998, Amsterdam, Netherlands, A.A. Balkema, Rotterdam, Stoelhorst, D.; denBoer, G. P. L., Editor(s)(s), 127-128 pp, 1998.
  Clifton, J. R.
• Computerizing Concrete Technology Knowledge.
  Concrete International, 74-76, December 1999.
  Frohnsdorff, G. J. C.; Kaetzel, L. J.
• Computer Modeling of the Replacement of "Coarse" Cement Particles by Inert Fillers in Low W/C Ratio Concretes: Hydration and Strength.
  Cement and Concrete Research, Vol. 31, No. 3, 503-506, 2001.
  Bentz, D. P.; Conway, J. T.
• Computer Modeling of the Vapor Compression Cycle With Constant Flow Area Expansion Device. Final Report.
  NBS BSS 155; May 1983.
  Domanski, P. A.; Didion, D. A.
• Computer Modelling of Interfacial Transition Zone: Microstructure and Properties.
  Engineering and Transport Properties of the Interfacial Transition Zone in Cementitious Composites. RILEM Report No. 20. Proceedings. Part 5. Chapter 20. 1999, Cedex, France, RILEM Publications s.a.r.l., Cedex, France, Alexander, M. G.; Arliguie, G.; Ballivy, G.; Bentur, A., Editor(s)(s), 349-385 pp, 1999.
  Bentz, D. P.; Garboczi, E. J.
• Computer Model to Predict the Surface Temperature and Time-of-Wetness of Concrete Pavements and Bridge Decks.
  NISTIR 6551; 24 p. August 2000.
  Bentz, D. P.
• Computer Program to Facilitate Performance Assessment of Underground Low-Level Waste Concrete Vaults.
  Materials Research Society. Materials Research Society Symposium Proceedings Volume 412. 1996, 491-498 pp, 1996.
  Snyder, K. A.; Clifton, J. R.; Pommersheim, J. M.
• Computer Representations of Design Standards and Building Codes: U.S. Perspective.
  International Journal of Construction Information Technology, Vol. 3, No. 1, 13-34, Summer 1995.
  Fenves, S. J.; Garrett, J. H., Jr.; Kiliccote, H.; Law, K. H.; Reed, K. A.
• Computer Simulation and Percolation Theory Applied to Concrete.
  Annual Reviews of Computational Physics. Volume VII, World Scientific Publishing Co., River Edge, NJ, Stauffer, D., Editor, 85-123 p., 1999.
  Garboczi, E. J.; Bentz, D. P.
• Computer Simulation of Interfacial Zone Microstructure and Its Effect on the Properties of Cement-Based Composites.
  American Ceramic Society. Materials Science of Concrete. Volume 6. 1995, Westerville, OH, Skalny, J. P.; Mindell, S., Editor(s)(s), 155-199 pp, 1995.
  Bentz, D. P.; Schlangen, E.; Garboczi, E. J.
• Computer Simulations of Airflow and Radon Transport in Four Large Buildings.
  NISTIR 5611; 46 p. April 1995.
  Fang, J. B.; Persily, A. K.
• Computer Simulations of Binder Removal From 2-D and 3-D Model Particulate Bodies.
  Journal of the American Ceramic Society, Vol. 79, No. 5, 1377-1388, 1996.
  Lewis, J. A.; Galler, M. A.; Bentz, D. P.
• Computer Technologies in Construction Robots Control.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 501-504 pp, 2002.
  Bock, T.; Parshin, D.; Neudorf, R.; Bulgakow, A.
• Concept of the Robotoid Manager With AR.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 537-541 pp, 2002.
  Bock, T.; Ashida, S.
• Concrete Degradation Modeling in the Evaluation of Entombment as a Decommission Option.
  Nuclear and Hazardous Waste Management International Conference: Spectrum 2002. Proceedings. August 4-8, 2002, Reno, NV, 2002.
  Snyder, K. A.; Philip, J.
• Concrete Fire Test Programs in Taiwan.
  NIST SP 919; September 1997.International Workshop on Fire Performance of High-Strength Concrete. Proceedings. Appendix B: Workshop Papers. B1. February 13-14, 1997, Gaithersburg, MD, Phan, L. T.; Carino, N. J.; Duthinh, D.; Garboczi, E., Editor(s)(s), 55-58 pp, 1997.
  Lin, T. D.; Chou, S.
• Concrete Materials Database.
  Concrete International, Vol. 22, No. 12, 28-33, December 2000.
  Oland, C. B.; Ferraris, C. F.
• Concrete Mixing Methods and Concrete Mixers: State of the Art.
  Journal of Research of the National Institute of Standards and Technology, Vol. 106, No. 2, 391-399, 2001.
  Ferraris, C. F.
• Concrete Mixture Optimization Using Statistical Mixture Design Methods.
  High Performance Concrete International Symposium. Proceedings. PCI/FHWA. October 20-22, 1997, New Orleans, LA, 230-244 pp, 1997.
  Simon, M. J.; Lagergren, E. S.; Snyder, K. A.
• Condensadores de Tubo Con Aletas Optimizacion Mediante Sistema Inteligente. (IN SPANISH) [Optimization of Finned-Tube Condensers Using an Intelligent System.]
  International Journal of Refrigeration, Vol. 30, No. 3, May 2007.
  Domanski, P. A.; Yashar, D. A.
• Condition Assessment of Concrete Nuclear Structures Considered for Entombment.
  NISTIR 7026; 43 p. July 2003.
  Snyder, K. A.
• Cone Calorimeter Combustion and Gasification Studies of Polymer Layered Silicate Nanocomposites.
  Chemistry of Materials, Vol. 14, No. 2, 881-887, February 2002.
  Zanetti, M.; Kashiwagi, T.; Falqui, L.; Camino, G.
• Connecting Buildings to Public Safety Networks.
  PubID: 901029;International Multi-Conference on Engineering and Technological Innovation (IMETI 2009). Proceedings. Volume 3. July 10-July 13, 2009, Orlando, FL, 199-203 pp, 2009.
  Vinh, A.
• Connection Model for the Seismic Analysis of Welded Steel Moment Frames.
  Engineering Structures, Vol. 20, No. 4/6, 390-397, April/June 1998.
  Gross, J. L.
• Connections of Fiber-Reinforced Polymer (FRP) Structural Members: A Review of the State of the Art.
  NISTIR 6532; 59 p. August 2000.
  Duthinh, D.
• Consideration on Flutter Characteristics of Super Long-Span Bridges.
  NIST SP 931; August 1998.U.S./Japan Natural Resources Development Program (UJNR). Wind and Seismic Effects. Joint Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects, 30th. May 12-15, 1998, Gaithersburg, MD, Raufaste, N. J., Jr., Editor(s), 415-423 pp, 1998.
  Sato, H.; Ogihara, K.; Ogi, K.
• Constructed Civil Infrastructure Systems R&D: A European Perspective. Appendix A: United Kingdom. Appendix B: Sweden.
  CERF Report 94-5010; 29 p. 1994.
  Wright, R. N.
• Construction and Building: Federal Research and Development in Support of the U.S. Construction Industry.
  ; 32 p. 1995.
  Wright, R. N.; Rosenfeld, A. H.; Fowell, A. J.
• Construction and Building. Interagency Program for Technical Advancement in Construction and Building. Report of the Subcommittee on Construction and Building Committee on Technology, National Science and Technology Council
  ; 36 p. 1999.
  Snell, J. E.; Rosenfeld, A. H.; Fowell, A. J.; Wright, R. N.
• Construction Metrology Standards in Orbiting Facility Construction, Maintenance, and Operation.
  Robotics 2000. ASCE Conference on Robotics for Challenging Environments. February 28-March 2, 2000, Albuquerque, NM, 2000.
  Latimer, D. T., IV
• Construction Supernetwork.
  NISTIR 6401; December 1999.Computer-Integrated Knowledge System (CIKS) Network: Report of the 2nd Workshop. Network for High-Performance Construction Materials and Systems (NPCMS). Proceedings. September 24-25, 1997, Gaithersburg, MD, 64-64 pp, 1999.
  Sparkman, A.
• Construction Zone Generation Mechanisms and Applications.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 293-298 pp, 2002.
  Akbas, R.; Fischer, M.
• CONTAM88 Building Input Files for Multi-Zone Airflow and Contaminant Dispersal Modeling.
  NISTIR 5440; 54 p. June 1994.
  Fang, J. B.; Persily, A. K.
• CONTAM93: A Multizone Airflow and Contaminant Dispersal Model With a Graphic User Interface.
  Air Infiltration Review, Vol. 16, No. 1, 6-8, December 1994.
  Walton, G. N.; Emmerich, S. J.
• CONTAM93: User Manual.
  NISTIR 5385; 77 p. March 1994.
  Walton, G. N.
• CONTAM94: A Multizone Airflow and Contaminant Dispersal Model With a Graphic User Interface.
  Performance Simulation Association. Building Simulation '95. 4th Conference. Proceedings. August 14-16, 1995, Madison, WI, 1-6 pp, 1995.
  Walton, G. N.
• CONTAM96: User Manual.
  NISTIR 6056; 77 p. September 1997.
  Walton, G. N.
• CONTAMW 1.0 User Manual: Multizone Airflow and Contaminant Transport Analysis Software.
  NISTIR 6476; 137 p. June 2000.
  Dols, W. S.; Walton, G. N.; Denton, K. R.
• CONTAMW 2.0 User Manual. Multizone Airflow and Contaminant Transport Analysis Software.
  NISTIR 6921; 161 p. November 2002.
  Dols, W. S.; Walton, G. N.
• CONTAMW 2.1 Supplemental User Guide and Program Documentation.
  NISTIR 7049; 101 p. October 23, 2003.
  Walton, G. N.; Dols, W. S.
• Continuous Measurements of Air Change Rates in an Occupied House for 1 Year: The Effect of Temperature, Wind, Fans and Windows.
  Journal of Exposure Analysis and Environmental Epidemiology, Vol. 12, No. 4, 296-306, July 2002.
  Wallace, L. A.; Emmerich, S. J.; Howard-Reed, C.
• Contributions of NIST/NBS Researchers to the Crystallography of Construction Materials.
  Journal of Research of the National Institute of Standards and Technology, Vol. 106, No. 6, 1051-1061, November/December 2001.
  Stutzman, P. E.
• Control of Exits From a Safe Region: A Stochastic Melnikov Approach.
  Control of Oscillations and Chaos (COC'97). International Conference, First (1st). Volume 3 of 3. 97TH8329. Proceedings. Institute of Electrical and Electronics Engineers (IEEE). August 27-29, 1997, St. Petersburg, Russia, Chernousko, F. L.; Fradkov, A. L., Editor(s)(s), 569-572 pp, 1997.
  Franaszek, M.; Frey, M. R. R.; Simiu, E.
• Control of Hysteretic Structures Using Hoo Algorithm and Stochastic Linearization Techniques.
  U.S. National Conference on Earthquake Engineering, 7th Proceedings. (7NCEE). Theme: Urban Earthquake Risk. Earthquake Engineering Research Institute (EERI). July 21-25, 2002, Boston, MA, 1-10 pp, 2002.
  Sadek, F.; Ftima, M. B.; El-Borgi, S.; McCormick, J.; Riley, M. A.
• Control Stability of a Heat-Flow-Meter Apparatus.
  American Society for Testing and Materials. Measurement Errors and Methods of Calibration of Heat-Flow-Meter Apparatus. ASTM C-16 Workshop. April 9, 1994, Williamsburg, VA, 1994.Journal of Thermal Insulation and Building Environments, Vol. 18, 116-127, October 1994.
  Zarr, R. R.
• Control System That Prevents Air From Entering an Air-Handling Unit Through the Exhaust Air Damper.
  Optimum Ventilation and Air Flow Controls in Buildings. AIVC 17th Annual Conference. Proceedings. Volume 2. September 1996, Gothenberg, Sweden, 562-569 pp, 1996.
  Seem, J. E.; House, J. M.
• Convective Boiling and Condensation Heat Transfer With a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, R134a/R600a.
  NISTIR 5905; 95 p. January 1997.New Approach Toward Low-Temperature Thermal Engineering Without Fluorocarbon Refrigerants, 45th. Oji International Seminar. Proceedings. September 16-19, 1997, Tomakomai City, Japan, 223-232 pp, 1998.Thermal Science and Engineering, Vol. 6, No. 1, 113-1201, 1998.
  Kedzierski, M. A.; Kim, M. S.
• Convective Boiling and Condensation Heat Transfer With a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, R134a/R600a.
  NISTIR 5905; 95 p. January 1997.New Approach Toward Low-Temperature Thermal Engineering Without Fluorocarbon Refrigerants, 45th. Oji International Seminar. Proceedings. September 16-19, 1997, Tomakomai City, Japan, 223-232 pp, 1998.Thermal Science and Engineering, Vol. 6, No. 1, 113-1201, 1998.
  Kedzierski, M. A.; Kim, M. S.
• Cooling Mode Fault Detection and Diagnosis Method for a Residential Heat Pump.
  NIST SP 1087; NIST Special Publication 1087; 98 p. October 2008.
  Kim, M. S.; Yoon, S. H.; Payne, W. V.; Domanski, P. A.
• Cost Analysis of Inadequate Interoperability in the U.S. Capital Facilities Industry.
  NIST GCR 04-867; 194 p. August 2004.
  Gallaher, M. P.; O'Connor, A. C.; Dettbarn, J. L., Jr.; Gilday, L. T.
• Cost-Effective Compliance With Life Safety Codes.
  Fire Technology, Vol. 32, No. 4, 291-296, November/December 1996.
  Weber, S. F.; Lippiatt, B. C.
• Cost-Effective Ground Improvement for Liquefaction Remediation Near Existing Lifelines.
  U.S./Japan Cooperative Program in Natural Resources. Panel on Wind and Seismic Effects. Joint Meeting, 27th. Proceedings. May 16-19, 1995, Tsukuma, Japan, 115-123 pp, 1995.
  Andrus, R. D.; Chung, R. M.
• Cost-Effective Positioning Solution for Asphalt Rollers Based on Low-Cost DGPS Receivers.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 403-408 pp, 2002.
  Jurasz, J.; Kley, K. L.
• Cost-Effective Responses to Terrorist Risks in Constructed Facilities.
  NISTIR 7073; 146 p. March 2004.
  Chapman, R. E.; Leng, C. J.
• Cost Sharing as an Incentive to Attain the Objectives of Shoreline Protection. Final Report.
  NBSIR 73-294; December 1973.
  Marshall, H. E.
• Cost Sharing as an Incentive to Attain the Objectives of Shoreline Protection. Final Report.
  NBSIR 73-294; December 1973.
  Marshall, H. E.
• Creating a Standard Corrosion Service Life Prediction Method.
  NISTIR 6327; May 1999.Modelling Service Life and Life-Cycle Cost of Steel-Reinforced Concrete. Report From the NIST/ACI/ASTM Workshop Held in Gaithersburg, MD. Proceedings. Summaries of Invited Presentations. Summary 2.8. November 9-10, 1998, 14-15 pp, 1999.
  Miltenberger, M. A.
• Crisis-Induced Intermittency and Melnikov Scale Factor.
  Physics Letters A, Vol. 205, 137-142, September 11, 1995.
  Franaszek, M.; Simiu, E.
• Criteria of Taking Decisions at Technical Operation of Building Machinery in Conditions of the Construction Plant.
  NIST SP 989; September 2002.International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology, Gaithersburg, Maryland. September 23-25, 2002, 103-107 pp, 2002.
  Bulgakow, A.; Drownikow, A.; Perschin, V.
• Critical Gaps in Durability Data for FRP Composites in Civil Infrastructure.
  Bridging the Centuries With SAMPE's Materials and Processes Technology. Science of Advanced Materials and Process Engineering Series. Society for the Advancement of Materials and Process Engineering (SAMPE), 45th International SAMPE Symposium and Exhibition. Volume 45. Proceedings. May 21-25, 2000, Long Beach, CA, 549-563 pp, 2000.
  Karbhari, V. M.; Chin, J. W.; Reynaud, D.
• Critical Properties and Phase Separation in Lattice Boltzmann Fluid Mixtures.
  Physical Review E, Vol. 63, 1-18, 2001.
  Martys, N. S.; Douglas, J. F.
• Cumulative Seismic Damage of Circular Bridge Columns: Benchmark and Low-Cycle Fatigue Tests.
  ACI Structural Journal, Vol. 96, No. 4, 633-641, July/August 1999.
  El-Bahy, A.; Kunnath, S. K.; Stone, W. C.; Taylor, A. W.
• Cumulative Seismic Damage of Circular Bridge Columns: Variable Amplitude Tests.
  ACI Structural Journal, Vol. 96, No. 5, 711-719, September/October 1999.
  El-Bahy, A.; Kunnath, S. K.; Stone, W. C.; Taylor, A. W.
• Cumulative Seismic Damage of Reinforced Concrete Bridge Piers.
  NISTIR 6075; 132 p. October 1997.
  Kunnath, S. K.; El-Bahy, A.; Taylor, A. W.; Stone, W. C.
• Curing, Hydration, and Microstructure of Cement Paste.
  ACI Materials Journal, Vol. 103, No. 5, 348-356, September/October 2006.
  Bentz, D. P.; Stutzman, P. E.
• Curing of High Performance Concrete: Annotated Bibliography.
  NIST GCR 97-715; 161 p. May 1997.
  Meeks, K. W.; Sarkani, S.
• Curing of High-Performance Concrete for Strength: What Is Sufficient?
  Repair, Rehabilitation, and Maintenance of Concrete Structures, and Innovations in Design and Construction, 4th International Conference. Proceedings. American Concrete Institute (ACI). ACI SP 193. September 2000, Seoul, Korea, American Concrete Institute, Farmington Hills, MI, Malhotra, V. M., Editor(s), 1-36 pp, 2000.
  Carino, N. J.; Meeks, K. W.
• Curing of High-Performance Concrete: Phase 1 Study.
  NISTIR 6505; 39 p. April 2001.
  Carino, N. J.; Meeks, K. W.
• Curing of High-Performance Concrete: Report of the State-of-the Art.
  NISTIR 6295; 199 p. March 1999.
  Meeks, K. W.; Carino, N. J.
• Curing With Shrinkage-Reducing Admixtures Beyond Drying Shrinkage Reduction.
  Concrete International, Vol. 27, No. 10, 55-60, October 2005.
  Bentz, D. P.
• CYCLE_D: NIST Vapor Compression Cycle Design Program Version 3.0 Users' Guide.
  NIST Standard Reference Database 49; 49 p. March 2003.
  Domanski, P. A.; Didion, D. A.; Chi, J.
• CYCLE D: NIST Vapor Compression Cycle Design Program. Version 4.0. Users' Guide.
  NIST Standard Reference Database 49; 42 p. May 2009.
  Brown, J. S.; Domanski, P. A.; Lemmon, E. W.
• CYCLE_D Version 4.0: Theoretical Vapor Compression Cycle Design Program.
  Paper IIR-204; PaperID 913;Thermophysical Properties and Transfer Processes of Refrigerants, 3rd Conference. Proceedings. (2009 IIR Commission B1 Conference)). June 23-26, 2009, Boulder, CO, 1-8 pp, 2009.
  Brown, J. S.; Domanski, P. A.; Lemmon, E. W.
• Cyclic Testing of Steel Moment Connections Rehabilitated With RBS or Welded Haunch.
  Journal of Structural Engineering, Vol. 126, No. 1, 57-68, January 2000.
  Uang, C. M.; Yu, Q. S.; Noel, S.; Gross, J. L.
• Cyclic Testing of Steel Moment Connections Rehabilitated With RBS or Welded Haunch.
  Journal of Structural Engineering, Vol. 126, No. 1, 57-68, January 2000.
  Uang, C. M.; Yu, Q. S.; Noel, S.; Gross, J. L.

All 1 2 4 A B C D E F F G H I J K L M N O P Q R R S T U V W X