BFRL Publications - mass loss

mass loss

• Advanced Fire Safe Materials for Aircraft Interiors.
  NISTIR 6030; June 1997.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 13th Joint Panel Meeting. Volume 2. March 13-20, 1996, Gaithersburg, MD, Beall, K. A., Editor(s), 249-259 pp, 1997.
  Lyon, R. E.
• Asia-Oceania I.S.O. 5660 Cone Calorimeter Inter-Laboratory Trials.
  NISTIR 6030; June 1997.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 13th Joint Panel Meeting. Volume 2. March 13-20, 1996, Gaithersburg, MD, Beall, K. A., Editor(s), 173-214 pp, 1997.
  Marchal, A.; Yoshida, M.; Hasemi, Y.
• Burning Behavior of Selected Automotive Parts From a Minivan.
  NISTIR 6143; 81 p. August 1998.
  Ohlemiller, T. J.; Shields, J. R.
• Burning Rate and Flame Heat Flux for PMMA in the Cone Calorimeter.
  NIST GCR 95-664; Thesis; 125 p. December 1994.
  Rhodes, B. T.
• Characterization of Candle Flames.
  Journal of Fire Protection Engineering, Vol. 15, No. 4, 265-285, November 2005.
  Hamins, A.; Bundy, M.; Dillon, S. E.
• Comparison of Combustion Characteristics of Crude Oils Using Cone Calorimeter.
  NISTIR 6588; November 2000.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 15th Joint Panel Meeting. Volume 2. Proceedings. March 1-7, 2000, San Antonio, TX, Bryner, S. L., Editor(s), 407-411 pp, 2000.
  Iwata, Y.; Koseki, H.; Janssens, M. L.
• Computational Model for Fire Growth and Spread On Thermoplastic Objects. Final Report.
  NIST GCR 07-914; REI Project 4716; 419 p. November 2007.
  Bockelie, M.; Tang, Q.
• Effect of Environmental Variables.
  Chapter 10;Heat Release in Fires, Elsevier Applied Science, NY, Babrauskas, V.; Grayson, S. J., Editor(s)(s), 307-325 pp, 1992.
  Babrauskas, V.
• Effects of Aspect Ratio of MWNT on the Flammability Properties of Polymer Nanocomposites.
  Polymer, Vol. 48, No. 1620, 6086-6096, September 2007.
  Cipiriano, B. H.; Kashiwagi, T.; Raghavan, S. R.; Yang, Y.; Grulke, E. A.; Yamamoto, K.; Shields, J. R.; Douglas, J. F.
• Example Illustrating Slide Rule Estimates of Fire Growth.
  Fire Technology, Vol. 22, No. 1, 45-53, February 1986.
  Lawson, J. R.; Quintiere, J. G.
• Example Illustrating Slide Rule Estimates of Fire Growth.
  Fire Technology, Vol. 22, No. 1, 45-53, February 1986.
  Lawson, J. R.; Quintiere, J. G.
• Experiments and Modeling of Multiple Workstations Burning in a Compartment. Federal Building and Fire Safety Investigation of the World Trade Center Disaster.
  NIST NCSTAR 1-5E; 158 p. September 2005.
  Hamins, A.; Maranghides, A.; McGrattan, K. B.; Ohlemiller, T. J.; Anleitner, R. L.
• Fire Performance of Furnishings as Measured in the NBS Furniture Calorimeter. Part 1.
  NBSIR 83-2787; 133 p. January 1984.
  Lawson, J. R.; Walton, W. D.; Twilley, W. H.
• Fire Tests of Men's Suits on Racks. Report of Test.
  Report of Test FR 4013; FR 4013; 25 p. December 15, 2001.
  Stroup, D. W.; DeLauter, L. A.; Lee, J.; Roadarmel, G. L.
• Flammability Performance Comparison Between Synthetic and Natural Clays in Polystyrene Nanocomposites.
  Fire and Materials, Vol. 29, No. 4, 213-229, July/August 2005.
  Morgan, A. B.; Chu, L. L.; Harris, J. D.
• Ignition Propensity and Heat Flux Profiles of Candle Flames for Fire Investigation.
  Fire and Materials 2003. 8th International Conference. Conference Papers. Proceedings. Organised by Interscience Communications Limited. January 27-28, 2003, San Francisco, CA, 363-376 pp, 2003.
  Dillon, S. E.; Hamins, A.
• Impact of a Residential Sprinkler on the Heat Release Rate of a Christmas Tree Fire.
  NISTIR 7506; 25 p. May 2008.
  Madrzykowski, D.
• Mass Loss Model for Char Forming Polymers.
  NISTIR 5904; October 1996.National Institute of Standards and Technology. Annual Conference on Fire Research: Book of Abstracts. October 28-31, 1996, Gaithersburg, MD, 107-108 pp, 1996.
  Lyon, R. E.
• Modeling Polymer Melt Flow Using the Particle Finite Element Method.
  Volume 2;Interflam 2007. (Interflam '07). International Interflam Conference, 11th Proceedings. Volume 2. September 3-5, 2007, London, England, 929-940 pp, 2007.
  Butler, K. M.; Onate, E.; Idelsohn, S. R.; Rossi, R.
• Modeling Solid Sample Burning.
  Fire Safety Science. Proceedings. Eighth (8th) International Symposium. International Association for Fire Safety Science (IAFSS). September 18-23, 2005, Beijing, China, Intl. Assoc. for Fire Safety Science, Boston, MA, Gottuk, D. T.; Lattimer, B. Y., Editor(s)(s), 625-636 pp, 2005.
  Linteris, G. T.; Gewuerz, L.; McGrattan, K. B.; Forney, G. P.
• Nanoparticle Networks Reduce the Flammability of Polymer Nanocomposites.
  Nature Materials, Vol. 4, No. 12, 928-933, December 2005.
  Kashiwagi, T.; Du, F.; Douglas, J. F.; Winey, K. I.; Harris, R. H., Jr.; Shields, J. R.
• Predicting the Burning of Wood Using an Integral Model.
  Combustion and Flame, Vol. 123, No. 3, 308-325, November 2000.
  Spearpoint, M. J.; Quintiere, J. G.
• Progress Report on Numerical Modeling of Experimental Polymer Melt Flow Behavior.
  Volume 2;Interflam 2004. (Interflam '04). International Interflam Conference, 10th Proceedings. Volume 2. July 5-7, 2004. Organised by Interscience Communications Ltd. in association with National Institute of Standards and Technology, Building Research Establishment; National Fire Protection Association; Society of Fire Protection Engineers; and Swedish National Testing and Research Institute, Edinburgh, Scotland, Interscience Communications Ltd., London, England, 937-948 pp, 2004.
  Butler, K. M.; Ohlemiller, T. J.; Linteris, G. T.
• Relationship Between Dispersion Metric and Properties of PMMA/SWNT Nanocomposites.
  Polymer, Vol. 48, No. 16, 4855-4866, July 2007.
  Kashiwagi, T.; Fagan, J.; Douglas, J. R.; Yamamoto, K.; Heckert, A. N.; Leigh, S. D.; Obrzut, J.; Du, F.; Lin-Gibson, S.; Mu, M.; Winey, K. I.; Haggenmueller, R.
• Styrene-Acrylonitrile Copolymer Montmorillonite Nanocomposite: Processing, Characterization and Flammability.
  Chapter 13;Fire Retardancy of Polymers. New Applications of Mineral Fillers. Chapter 13, Royal Society of Chemistry, Cambridge, UK, 177-186 p., 2005.
  Gilman, J. W.; Bourbigot, S.; Bellayer, S.; Stretz, H.; Paul, D. R.
• Time-Dependent Local Mass Rate of Finite-Thickness Burning Walls of PMMA.
  ASME HTD Vol. 176; September 1990.American Society of Mechanical Engineers (ASME). Heat and Mass Transfer in Fire and Combustion Systems. ASME HTD Vol. 176. 1991, ASME, New York, Yao, S. C.; Chung, J. N., Editor(s)(s), 1-7 pp, 1990.
  Kulkarni, A. K.; Kim, C. I.; Mitler, H. E.
• Time-Dependent Mass Loss rate Behavior of Wall Materials Under External Radiation.
  Fire and Materials, Vol. 17, No. 5, 249-254, September/October 1993.
  Brehob, E. G.; Kulkarni, A. K.
• Transient Modeling of Thermal Degradation in Non-Charring Solids.
  Combustion Science and Technology, Vol. 145, 83-108, 1999.
  Sohn, Y.; Baek, S. W.; Kashiwagi, T.
• Wind Effect on Fire Behavior in Compartment.
  NISTIR 6588; November 2000.U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 15th Joint Panel Meeting. Volume 2. Proceedings. March 1-7, 2000, San Antonio, TX, Bryner, S. L., Editor(s), 399-405 pp, 2000.
  Naruse, T.; Hasemi, Y.