BFRL Publications - ignition source

ignition source

• Assessing the Flammability of Composite Materials.
  Sagamore Army Materials Research Conference, 39th. September 16-17, 1992, Plymouth, MA, 1992.Journal of Fire Sciences, Vol. 11, No. 4, 308-319, July/August 1993.
  Ohlemiller, T. J.; Cleary, T. G.; Brown, J. E.; Shields, J. R.
• Assessment Methodology for the Fire Performance of School Bus Interior Components.
  International Association for Fire Safety Science. Fire Safety Science. Proceedings. 3rd International Symposium. July 8-12, 1991, Edinburgh, Scotland, Elsevier Applied Science, New York, Cox, G.; Langford, B., Editor(s)(s), 855-864 pp, 1991.
  Braun, E.; Klote, J. H.; Davis, S.; Levin, B. C.; Paabo, M.; Gann, R. G.
• Burning Behavior of Selected Automotive Parts From a Minivan.
  NISTIR 6143; 81 p. August 1998.
  Ohlemiller, T. J.; Shields, J. R.
• Burning Behavior of Selected Automotive Parts From a Sports Coupe.
  NISTIR 6313; 68 p. April 2001.
  Ohlemiller, T. J.; Shields, J. R.
• Cook County Administration Building Fire, 69 West Washington, Chicago, Illinois, October 17, 2003: Heat Release Rate Experiments and FDS Simulations.
  NIST SP 1021; NIST Special Publication 1021; 489 p. July 2004.
  Madrzykowski, D.; Walton, W. D.
• Discussions of a Model and Correlation for the ISO 9705 Room-Corner Test.
  NISTIR 6242; October 1998.National Institute of Standards and Technology. Annual Conference on Fire Research: Book of Abstracts. November 2-5, 1998, Gaithersburg, MD, Beall, K. A., Editor(s), 141-142 pp, 1998.
  Dillon, S. E.; Quintiere, J. G.; Kim, W. H.
• Effect of Ignition Conditions on Upward Flame Spread on a Composite Material in a Corner Configuration.
  Materials and Process Challenges: Aging Systems, Affordability, Alternative Applications. SAMPE Symposium and Exhibition, 41st International Proceedings. Volume 41. Book 1. Society for the Advancement of Material and Process Engineering (SAMPE). March 24-28, 1996, Anaheim, CA, Schmitt, G.; Bauer, J.; Magnurany, C. J.; Hurley, C., Editor(s)(s), 734-747 pp, 1998.Fire Safety Journal, Vol. 31, No. 4, 331-344, November 1998.
  Ohlemiller, T. J.; Cleary, T. G.; Shields, J. R.
• Evaluation of the Ability of Fire Dynamic Simulator to Simulate Positive Pressure Ventilation in the Laboratory and Practical Scenarios.
  NISTIR 7315; 149 p. April 2006.
  Kerber, S.
• Fire Performance of Flame Retarded Polymers Used in Consumer Electronics.
  Fire and Materials 2005. 9th International Conference. Conference Papers. Proceedings. Organised by Interscience Communications Limited. January 31-February 1, 2005, San Francisco, CA, Interscience Communications Limited, London, England, 85-97 pp, 2005.
  Bundy, M.; Ohlemiller, T. J.
• Fire-Related Aspects of the Northridge Earthquake.
  NIST GCR 98-743; 164 p. March 1998.
  Scawthorn, C.; Cowell, A. D.; Borden, F.
• Flame Spread of Carpet Systems Involved in Room Fires.
  NBSIR 76-1013; 42 p. June 1976.
  Tu, K. M.; Davis, S.
• Full-Scale Flammability Measures for Electronic Equipment.
  NIST Technical Note 1461; NIST TN 1461; 52 p. August 2004.
  Bundy, M.; Ohlemiller, T. J.
• Furniture Flammability: An Investigation of the California Bulletin 133 Test. Part 2. Characterization of the Ignition Source and a Comparable Gas Burner.
  NISTIR 4348; 42 p. June 1990.
  Ohlemiller, T. J.; Villa, K. M.
• Influence of Ignition Source on the Flaming Fire Hazard of Upholstered Furniture.
  NISTIR 4847; 71 p. June 1992.Fire Safety Journal, Vol. 23, 79-102, 1994.
  Cleary, T. G.; Ohlemiller, T. J.; Villa, K. M.
• Influence of Ignition Source on the Flaming Fire Hazard of Upholstered Furniture.
  NISTIR 4847; 71 p. June 1992.Fire Safety Journal, Vol. 23, 79-102, 1994.
  Cleary, T. G.; Ohlemiller, T. J.; Villa, K. M.