BFRL Publications - Zarr, R. R.

Zarr, R. R.

• Analytical Study of Residential Buildings With Reflective Roofs.
  NISTIR 6228; 80 p. October 1998.
  Zarr, R. R.
• Calibration of Thin Heat Flux Sensors for Building Applications Using ASTM C 1130.
  Journal of Testing and Evaluation, Vol. 29, No. 3, 293-300, May 2001.
  Zarr, R. R.; Martinez-Fuentes, V.; Filliben, J. J.; Dougherty, B. P.
• Control Stability of a Heat-Flow-Meter Apparatus.
  American Society for Testing and Materials. Measurement Errors and Methods of Calibration of Heat-Flow-Meter Apparatus. ASTM C-16 Workshop. April 9, 1994, Williamsburg, VA, 1994.Journal of Thermal Insulation and Building Environments, Vol. 18, 116-127, October 1994.
  Zarr, R. R.
• Design Concepts for a New Guarded Hot Plate Apparatus for Use Over an Extended Temperature Range.
  Insulation Materials: Testing and Applications, 4th Volume. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 98-115 pp, 2002.
  Flynn, D. R.; Zarr, R. R.; Hahn, M. H.; Healy, W. M.
• Development of a NIST Standard Reference Database for Thermal Conductivity of Building Materials.
  Thermal Conductivity 25/Thermal Expansion 13. Proceedings. June 13-16, 1999, Technomic Publishing Co., Inc., 2000.
  Zarr, R. R.; Dalton, G. R.; Fioravante, S. M.
• Development of Thermal Insulation Standard Reference Materials Using "Good" Experimental Design.
  Thermal Conductivity, 24th and Thermal Expansion, 12th Joint Conferences. Proceedings. October 26-29, 1997, Pittsburgh, PA, Technomic Publishing Co., Inc., Lancaster, PA, Gaal, P. S.; Apostolescu, D. E.; Hurst, E. P., Editor(s)(s), 662-672 pp, 1999.
  Zarr, R. R.; Lagergren, E. S.
• Development of Thermal Insulation Standard Reference Materials Using "Good" Experimental Design.
  Thermal Conductivity, 24th and Thermal Expansion, 12th Joint Conferences. Proceedings. October 26-29, 1997, Pittsburgh, PA, Technomic Publishing Co., Inc., Lancaster, PA, Gaal, P. S.; Apostolescu, D. E.; Hurst, E. P., Editor(s)(s), 662-672 pp, 1999.
  Zarr, R. R.; Lagergren, E. S.
• Effects of Humidity and Elevated Temperature on the Density and Thermal Conductivity of a Rigid Polyisocyanurate Foam Co-Blown With CCI3F and CO2.
  Society of the Plastics Industry of Canada's. Workshop on Long-Term Performance of Cellular Plastics, 3rd International. October 4-6, 1993, Ontario, Canada, 1-21 pp, 1993.Journal of Thermal Insulation and Building Environments, Vol. 17, 330-350, April 1994.
  Zarr, R. R.; Nguyen, T.
• Effects of Humidity and Elevated Temperature on the Density and Thermal Conductivity of a Rigid Polyisocyanurate Foam.
  Society of the Plastics Industry (SPI). Polyurethanes 92. Annual Technical/Marketing Conference, 34th. October 21-24, 1992, New Orleans, LA, 422-430 pp, 1992.Journal of Cellular Plastics, Vol. 30, 316-337, July 1994.
  Zarr, R. R.; Nguyen, T.
• Expanded Polystyrene Board as a Standard Reference Material for Thermal Resistance Measurement Systems.
  ; 42 p.Insulation Materials Testing and Applications. Volume 3. ASTM Committee C-16. Proceedings. ASTM STP 1320. May 15-17, 1997, Quebec, Canada, ASTM, West Conshohocken, PA, 1997.
  Zarr, R. R.
• Experimental Verification of a Moisture and Heat Transfer Model in the Hygroscopic Regime.
  U.S. Department of Energy (DOE); Oak Ridge National Laboratory (ORNL); American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE); Building Environment and Thermal Envelope Council (BETEC). Thermal Performance of the Exterior Envelopes of Building VI Conference. Proceedings. Thermal VI. December 4-8, 1995, Clearwater Beach, FL, 273-282 pp, 1995.
  Burch, D. M.; Zarr, R. R.; Fanney, A. H.
• Fabrication of a Guarded-Hot-Plate Apparatus for Use Over an Extended Temperature Range and in a Controlled Gas Atmosphere.
  International Thermal Conductivity 28th Conference/International Thermal Expansion 16th Symposium. Proceedings. June 26-29, 2005, New Brunswick, Canada, DEStech Publications, Inc., Dinwiddie, R.; White, M. A.; McElroy, D. L., Editor(s)(s), 235-245 pp, 2005.
  Zarr, R. R.; Flynn, D. R.; Hettenhouser, J. W.; Brandenburg, N. J.; Healy, W. M.
• Heat and Moisture Transfer in Wood-Based Wall Construction: Measured Versus Predicted.
  NIST BSS 173; 83 p. February 1995.
  Zarr, R. R.; Burch, D. M.; Fanney, A. H.
• High-Temperature Guarded Hot Plate Apparatus: Control of Edge Heat Loss.
  International Thermal Conductivity 28th Conference/International Thermal Expansion 16th Symposium. Proceedings. June 26-29, 2005, New Brunswick, Canada, DEStech Publications, Inc., Dinwiddie, R.; White, M. A.; McElroy, D. L., Editor(s)(s), 208-223 pp, 2005.
  Flynn, D. R.; Healy, W. M.; Zarr, R. R.
• High-Temperature Guarded Hot Plate Apparatus: Optimal Locations of Circular Heaters.
  International Thermal Conductivity 28th Conference/International Thermal Expansion 16th Symposium. Proceedings. June 26-29, 2005, New Brunswick, Canada, DEStech Publications, Inc., Dinwiddie, R.; White, M. A.; McElroy, D. L., Editor(s)(s), 466-477 pp, 2005.
  Flynn, D. R.; Healy, W. M.; Zarr, R. R.
• History of Testing Heat Insulators at the National Institute of Standards and Technology.
  ASHRAE Transactions, Vol. 107, No. 2, 1-11, June 2001.
  Zarr, R. R.
• Interlaboratory "Pilot Run" Study of Small Heat-Flow-Meter Apparatus for ASTM C518.
  Journal of Testing and Evaluation, Vol. 27, No. 6, 357-367, November 1999.
  Zarr, R. R.; Lagergren, E. S.
• International Comparison of Guarded Hot Plate Apparatus Using National and Regional Reference Materials.
  NIST TN 1444; 87 p. May 2002.
  Zarr, R. R.; Filliben, J. J.
• International Study of Guarded Hot Plate Laboratories Using Fibrous Glass and Expanded Polystyrene Reference Materials.
  Insulation Materials: Testing and Applications. Volume 4. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 3-16 pp, 2003.
  Zarr, R. R.; Filliben, J. J.
• International Study of Guarded Hot Plate Laboratories Using Fibrous Glass and Expanded Polystyrene Reference Materials.
  Insulation Materials: Testing and Applications. Volume 4. ASTM STP 1426. 2002, ASTM International, West Conshohocken, PA, Desjarlais, A. O.; Zarr, R. R., Editor(s)(s), 3-16 pp, 2003.
  Zarr, R. R.; Filliben, J. J.
• Line-Heat-Source Guarded-Hot-Plate Apparatus.
  ASTM Designation C1043; PCN 12-310430-61; 33 p. 1996.
  Zarr, R. R.; Hahn, M. H.
• NIST/NRC-Canada Interlaboratory Comparison of Guarded Hot Plate Measurements: 1993-1997.
  NISTIR 6087; 11 p. December 1997.
  Zarr, R. R.; Kumaran, M. K.; Lagergren, E. S.
• NIST/NRC-Canada Interlaboratory Comparison of Guarded Hot Plate Measurements: 1993-1997.
  NISTIR 6087; 11 p. December 1997.
  Zarr, R. R.; Kumaran, M. K.; Lagergren, E. S.
• Performance Testing of Alternative Blowing Agents for Foam Insulation of Residential Water Heaters.
  Appliance Manufacturer Conference and Exposition (AMCE). Proceedings. September 27-29, 1999, Nashville, TN, 293-303 pp, 1999.
  Fanney, A. H.; Zarr, R. R.
• Room-Temperature Thermal Conductivity of Expanded Polystyrene Board for a Standard Reference Material.
  NISTIR 5838; 42 p. May 1996.
  Zarr, R. R.; Davis, M. W.; Anderson, E. H.
• Slug Calorimeter for Evaluating the Thermal Performance of Fire Resistive Materials.
  Fire and Materials, Vol. 30, No. 4, 257-270, July/August 2006.
  Bentz, D. P.; Flynn, D. R.; Kim, J. H.; Zarr, R. R.
• Standard Reference Materials: Glass Fiberboard, SRM 1450c, for Thermal Resistance From 280 K to 340 K.
  NIST SP 260-130; 64 p. April 1997.
  Zarr, R. R.
• Testing of Thermal Insulators.
  NIST SP 958; January 2001.Century of Excellence in Measurements, Standards, and Technology; A Chronicle of Selected Publications of NBS/NIST, 1901-2000. NIST SP 958, Lide, D. R., Editor(s), 10-13 pp, 2001.
  Zarr, R. R.
• Thermal Performance of Residential Electric Water Heaters Using Alternative Blowing Agents.
  ASHRAE Transactions 2000, Vol. 106, No. 2, 1-13, July 2000.
  Fanney, A. H.; Zarr, R. R.; Ketay-Paprocki, J. D.